Issue 0, 1972

Mechanism of formation and some surface characteristics of thin polymer films formed on metal surfaces by electron bombardment

Abstract

The formation of thin films by electron bombardment has been studied and some of the important factors controlling the nature and surface characteristics of the films have been identified. A number of experimental techniques have been developed in order to obtain information on both the species likely to be involved in film growth and also the nature of the film surfaces. The surface characteristics have been monitored by contact angle studies.

The possible importance of negative ions in film formation is illustrated with Si(CH3)4, where over 20 different negative ions were detected, the major ones being H, C2H and SiC2. Such results also have an important bearing on electron affinity data obtained by the magnetron method.

Thin films formed from perfluorobut-2-ene have surface characteristics which vary with the monomer pressure, the substrate temperature, and electron and ion energies. Information on the relative importance of the role of negative ions compared with electron and adsorbed monomer reaction is obtained. Some suggestions are discussed regarding possible surface structures inferred from wetting characteristics.

Article information

Article type
Paper

Faraday Spec. Discuss. Chem. Soc., 1972,2, 198-209

Mechanism of formation and some surface characteristics of thin polymer films formed on metal surfaces by electron bombardment

S. Frost, W. J. Murphy, M. W. Roberts, J. R. H. Ross and J. H. Wood, Faraday Spec. Discuss. Chem. Soc., 1972, 2, 198 DOI: 10.1039/S19720200198

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements