Man
Li‡
a,
Wenhao
Hou‡
b,
Lina
Qiao
*a,
Hong
Zhang
b,
Mengdan
Wang
a,
Yonghui
Wen
a and
Zejiang
Jia
a
aMarine College, Shandong University, Weihai 264209, China. E-mail: qiaolina@sdu.edu.cn
bSchool of Marine Science and Technology, Harbin Institute of Technology at Weihai, Weihai, Shandong 264209, China
First published on 17th December 2024
Gas/particle (G/P) partitioning is a core process governing the atmospheric transport of organophosphate flame retardants (OPFRs). However, accurately predicting the G/P partition performance of OPFRs remains a challenge. In this study, four independent models were employed to estimate the characteristics of OPFR G/P partitioning within the octanol–air partition coefficient range of 4.7 (TMP) to 14.2 (TMPP). The results showed that in the maximum partition domain, the Li–Ma–Yang steady-state model fitted the best, with 85.2% of the predicted G/P partition quotient (log
KP) values within an acceptable deviation range of ±1 log units for OPFRs. Accordingly, no significant deviations were observed between the predicted (0.56 ± 0.32) and monitored (0.52 ± 0.11) values of the average particle-bound fraction (φP) for the Li–Ma–Yang model in the maximum partition domain. Large deviations were observed between the monitored values and predicted log
KP values by these four models in the equilibrium domain. Several factors responsible for the significant deviations observed in G/P partitioning values of OPFRs were discussed. These identified factors were used to develop a new empirical equation, which substantially improved log
KP predictions for OPFRs to 75.8% in the equilibrium domain.
Environmental significanceThe gas/particle partitioning behavior of emerging chemicals such as organophosphate flame retardants determines their long-range transport, wet and dry deposition and atmospheric fate. Currently, the accurate prediction of the gas/particle partition quotient of OPFRs remains a challenge. Understanding the characteristics and influencing factors of gas particle partition of OPFRs is the key to addressing this challenge. In this study, the characteristics of gas/particle partition of OPFRs and the determining factors were comprehensively investigated in the octanol–air partition coefficient (KOA) range of 4.7 (TMP) to 14.2 (TMPP). Large deviations were observed between the measured and predicted log KP values in the EQ domain (log KOA < 11.4). A new empirical equation for the EQ domain was developed with a better agreement between the predicted and measured data, and the percentage of data points that fall within the ADR increased from 23.1% to 75.8%.
|
After OPFRs are released into the atmosphere, they are adsorbed or absorbed onto/into particulate matter, and their distribution between gas and particle phases determines their global long-range atmospheric transport, wet and dry deposition, degradation and the pathways to human exposure.12 Generally, gaseous OPFRs are more easily transported through the atmosphere. Higher gaseous concentrations of OPFRs are observed in summer, while higher particulate concentrations of OPFRs are found in winter.13 Additionally, both gaseous and particulate OPFRs can enter organisms through different pathways and pose potential hazards. Hence, more attention has to be paid to the gas/particle partitioning (GPP) behavior of OPFRs in the environment that affects their long-range transport and human exposure pathways. Particulate OPFRs might be more persistent in the air due to their low vapor pressure.14–16 The G/P partition of OPFRs could affect their long-range transport via both air and seawater, even from the European continent and seas to the polar regions.11 Thus, the knowledge of GPP of OPFRs is of great significance for understanding their environmental behavior and fate.
There are many factors that affect the G/P partition of OPFRs in ambient atmosphere. Previous studies have shown that high temperature can promote the mass transfer of OPFRs from particles to the gas phase, which will lead to OPFRs distributing in the gas phase.17 A negative correlation between temperature and particle-bound fraction (φp) has been observed, suggesting the temperature might affect the GPP of OPFRs (except for triphenyl phosphate (TPHP)).18 High particle matter (PM) mass and low temperature will facilitate the condensation effect of OPFR, contributing to the migration of gaseous OPFRs into solid particulate matter.19 Therefore, it is generally acknowledged that temperature and TSP are the driving forces of OPFR sorption on particulate matter.20 Recent studies show that relative humidity and wind speed positively correlate with the φP of OPFRs.21 The octanol-air partition coefficient (KOA), organic matter fraction (fOM), liquid vapor pressure, volatility, mass of the target compound, and aerosol surface area also are essential parameters relevant to the GPP of OPFRs.17,19 The potential point sources and sampling measurements also have strong influence on the GPP of semi-volatile organic compounds (SVOCs), such as OPFRs.22 The contribution of these GPP-influencing factors to predicting the KP values of OPFRs is still unclear and not quantified.17
Many gas/particle partition models have been developed to quantify the factors that influence and determine the G/P partitioning of SVOCs, such as OPFRs. The Harner–Bidleman (H–B) model (equilibrium model) might be more reliable for predicting the KP values of OPFRs in typical urban cities and rural sites.13 Both Junge–Pankow (J–P) and H–B models tend to underestimate the φP of low-molecular-weight OPFRs and overestimate those of high-molecular-weight OPFRs.23 By comparing the results of J–P model and H–B model in the island in the South China Sea, it is suggested that the GPP of OPFRs might be in a non-equilibrium state.24 Due to the small temperature range, both the temperature-related models did not fit the monitored log
KP data well. The pp-LFER model, H–B model, D–E model and steady-state model, which are used to evaluate the phase distribution of OPFRs in urban areas, suggest that all these models underestimate the log
KP values in winter and summer conditions, especially for relatively volatile OPFRs that are mainly distributed in the equilibrium (EQ) domain.17 It has been shown previously that a glass fiber filter can change the observed particle-bound fraction of compounds with higher volatility but has little impact on relatively non-volatile components.22 The relative humidity, temperature, and TSP might affect the ability of the glass fiber filter to capture OPFRs, and further research is needed to quantify the impact of these factors.22 Therefore, the questions of how to consider these factors into the G/P partition model and predict the G/P partitioning of OPFRs more accurately are desired to be answered.
In this study, the characteristics and new empirical prediction equation of the G/P partitioning of OPFRs are investigated. Here, we intended (1) to identify the characteristics of G/P partitioning of OPFRs in three aspects: monitoring data, model prediction, and substituent groups in the three partition domains; (2) to develop a new empirical equation for the G/P partitioning of OPFRs in the EQ domain. The findings of this study will provide more knowledge on the dominating mechanisms underlying the partition of various OPFR compounds in the atmosphere.
![]() | (1) |
The particle-bound fraction (φp) is another commonly used dimensionless parameter to describe the G/P partitioning behavior of OPFRs:
![]() | (2) |
log KP-LMY = log KPE + log α | (3) |
KP-LMY is the value of log
KP predicted by the L–M–Y model, and log
KPE is the equilibrium term calculated by the Harner–Bidleman model. The equilibrium is a special case of the steady state when log
α = 0. The log
α is the non-equilibrium term, corresponding to the wet and dry deposition on particles:25![]() | (4) |
K
OA is a necessary parameter to predict log
KP and is the function of temperature:26
![]() | (5) |
The log
KOA could be calculated from the relationship between the log
KOA and log
PL by the following equation:27
log KOA = −log PL + 6.46 | (6) |
The Ao and Bo values of the OPFRs are listed in Table S1.†
C in eqn (4) is a weighting factor for the mass transfer coefficient, with a value of 5 for OPFRs in this study. C = 5 has been successfully used for several SVOCs, such as PBDEs,28,29 non-PBDE brominated flame retardants,30 halogenated flame retardants,31 polychlorinated dibenzo-p-dioxins/furans,32 organochlorine pesticides,33 short- and medium-chain chlorinated paraffins,34 and polychlorinated biphenyls.35
The Junge–Pankow model assumes that particle surface adsorption dominates the GPP process as a function of subcooled liquid vapor pressure (PL, Pa) and the surface area concentration of particulate matter in the air (θ, cmsurface2 cmair−3). The formula for φP is given below :36
![]() | (7) |
The Harner–Bidleman model assumes that the absorption of SVOCs by the particles is equivalent to that in octanol, which acts as a surrogate to the sorbing organic matter in the particles.38 The Harner–Bidleman formula is a function of KOA and fOM:
log KP-HB = log KOA + log fOM − 11.91 | (8) |
By considering the adsorption and absorption processes as two equally important parts, the soot–air partition coefficient (KSA, L kg−1) and the fraction of elemental carbon (fEC) as the core factors of the adsorption process, the equation of the Dachs–Eisenreich model is derived as follows:
| KP−DE = 10−12fOMKOA + 10−12fECKSA | (9) |
log
KSA is given by the following equation:
![]() | (10) |
KP predictions of OPFRs based on the four models. More detail information on the sampling method, quality assurance and quality control can be found in Table S2†. The measured data used for modeling are displayed in Table S4†.
KPvs. log
KOA in ambient atmosphere
KP and log
KOA is an important descriptor of the G/P partitioning of SVOCs. According to the two log
KOA thresholds (log
KOA1 = 11.4 and log
KOA2 = 12.5), the partitioning span could be divided into three domains: equilibrium (EQ) domain (log
KOA ≤ 11.4), non-equilibrium (NE) domain (11.4 < log
KOA < 12.5), and the maximum partition (MP) domain (log
KOA ≥ 12.5).25 Fig. S1† displays the partition domains of the 13 OPFRs compounds in the sampling temperature range (0–30 °C) and simulated temperature range (−50–50 °C) according to their temperature-adjusted log
KOA and the two log
KOA thresholds. About 70.2% of the observed OPFR data were in the EQ domain, including those of TMP, TEP, TCEP, TIBP, TNBP, TCIPP, and TPEP at the sampling temperature. All the recorded TMPP data points were found to be distributed in the MP domain under the monitoring conditions. According to the steady state model, the log
KP of TMPP will be a constant value in the MP domain. TDCIPP, TPHP, TBOEP were the EQ-NE domain compounds in the sampling temperature range. The log
KP values of OPFRs ranged from −4.86 to 1.10 m3 μg−1, with a mean value ± standard deviation of −1.58 ± 1.17 m3 μg−1 and a median value of −1.58 m3 μg−1. The relationship regression equation between the log
KP of the monitored OPFRs and their log
KOA is shown in Fig. 1, with log
KOA ranging from 4.7 for TMP to 14.2 for TMPP. After entering the MP domain, the log
KP value should approach a constant according to the steady state theory. As shown in Fig. 1, the constant value of log
KP (−1.21) observed for the OPFRs in the MP domain is close to the predicted log
KP-LMY value of −1.53. The slope (mo) and intercept (bo) values from the log–log relationship between KP and KOA of the OPFRs were 0.09 and −2.58, respectively, revealing a much smoother curve than those of other SVOCs. For example, the slope and intercept of the log
KPversus log
KOA plot were 0.53 and −7.60 for PBDEs sampled in the Arctic,46 0.24 and −4.21 for organochlorine compounds sampled in west Antarctica,47 and 0.62 and −7.81 for PAHs sampled in China,48 respectively. Based on our previous study,49 the value of mo should lie between 0 and 1 depending on the values of log
KOA under the steady state. The relationship between bo and mo when C equals 5 can be presented as bo = −11.38 × mo − 1.53. The bo value was calculated as −2.55 using the above equation, which is very close to the monitored bo value of −2.45, along with a measured mo of 0.09. The normality results of the Kolmogorov–Smirnov test revealed that the monitored log
KP and log
KOA data points did not follow a normal distribution. Log
KP of the OPFRs positive correlated with log
KOA (p < 0.05), with a Spearman correlation coefficient of 0.21. This suggests a non-linear relationship between the observed log
KP and log
KOA of the OPFRs.
KP and φP obtained using the models and measured data
KP and φP, respectively. As shown in Fig. 2, the absolute errors between the data predicted by the four models and the observed data (Δlog
KP = predicted log
KP − measured log
KP) were compared, respectively, for the 13 target OPFR compounds. The percentage of data points falling within the acceptable deviation range (ADR) was used to evaluate the prediction capability of these gas-particle distribution models. The ADR is defined as the region bounded by a deviation of ±1 (ADR: −1 ≤ Δlog
KP ≤ 1).28,29 As shown in Fig. 2, in the MP domain, the L–M–Y model showed a better performance, with 85.2% (with root mean square error (RMSE) = 0.68) of the monitored data points of the MP domain compounds (TMPP, THP, and TEHP) within the ADR. The other models (H–B model, D–E model and J–P model) tended to overestimate the log
KP values of the OPFRs, with less than 33% of data points in the ADR. These results indicate that the log
KP predicted using the L–M–Y model that considers log
KOA and particle deposition agree well with the measured log
KP values of TMPP, THP, and TEHP in the MP domain. In the NE domain, 78.6% (with RMSE = 0.82) of log
KP-LMY data points belonging to 5 OPFRs compounds (THP, TEHP, TBOEP, TPHP, and TDCIPP) were within the ADR in comparison with 70.7% (with RMSE = 1.00) for log
KP-HB, 68.7% (with RMSE = 1.03) for log
KP-DE, and 19.4% (with RMSE = 1.83) for log
KP-JP.
As shown in Fig. 2, large deviations between the measured and predicted log
KP of OPFRs were observed in the EQ domain. Furthermore, in the NE and MP domains, the L–M–Y model, which considers both log
KOA and particle deposition in the GPP process (or temperature, Ao and Bo), showed acceptable performance in predicting log
KP. Thus, log
KOA (or temperature) and particle deposition might be the core factors that promote the mass transfer of OPFRs (TMPP, THP, TEHP, TBOEP, TPHP, and TDCIPP) between the gas and particle phases in the NE and MP domains.
The particle-bound fraction (φP) is a crucial parameter for characterizing the G/P partitioning of OPFRs. Fig. S2† presents the predicted φP values of OPFRs and measured values across the three partition domains. In the EQ domain, all four models tended to underestimate the φP values of OPFRs. In the NE domain, predictions from the steady state (L–M–Y) model aligned more closely with the measured results. The average φP value ± standard deviation (SD) for the monitored data was 0.52 ± 0.11, while that predicted by the steady state model was 0.56 ± 0.32 for THP, TEHP, TBOEP, TPHP, and TDCIPP. Within the MP domain, there was clear consistency between the measured data and φP predicted by the L–M–Y model for TMPP, THP, and TEHP, with monitored values at 0.72 ± 0.21 and predicted φP at 0.61 ± 0.07. Consequently, these results clearly demonstrate that the L–M–Y model provides better agreement with the monitored φP values of OPFRs, particularly within the NE and MP domains.
A comparison of log
KP as a function of log
KOA values predicted by the four models for the three OPFRs groups (2 aryl-OPFRs, 3 chlorine-OPFRs, and 8 alkyl-OPFRs) is presented along with the measured data in Fig. 3 and S4.† OPFR compounds with high molecular weights and high log
KOA values were mainly distributed in the MP domain, such as the aryl-OPFR compound TMPP. The monitoring constant, log
KP, values of TMPP, TEHP and THP were observed in the MP domain (Fig. 3(f), (e) and S4(g)†). The L–M–Y model presented better consistency with the measured log
KP values of OPFRs in the ADR in the MP domain: 97.2% for the alkyl-OPFR compound TEHP, 76% for the aryl-OPFR molecule TMPP, and 100% for the alkyl-OPFR compound THP. In contrast, the other equilibrium models tended to overestimate the log
KP values of TEHP, TMPP, and THP. Especially in the MP domain, the observed constant log
KP values of OPFRs, including −1.51 ± 0.36 for TEHP, −1.16 ± 0.62 for TMPP, −1.45 ± 0.35 for THP, were close to the constant value (−1.53 ± 1) predicted by the L–M–Y model. In the NE domain, the L–M–Y model also demonstrated superior performance in predicting the G/P partition quotients for OPFRs, with 79.8% of the TEHP data points in the ADR (with RMSE = 0.81) in comparison with 60.1% (with RMSE = 1.14) for log
KP-HB, 58.3% (with RMSE = 1.18) for log
KP-DE, and 8.72% (with RMSE = 2.18) for log
KP-JP. Comparing the prediction theories and results of these four models, the wet and dry deposition might be an important factor for better prediction performance of the L–M–Y model in NE and MP domain.
KP and φP values of the OPFRs in the EQ domain and those predicted by the GPP models. These significant discrepancies may be attributed to sampling artifacts and some key influential factors that impact the GPP process of OPFRs, particularly the low-molecular-weight alkyl-OPFR compounds.50 However, the deviation may also be caused by atmospheric processes that are overlooked or not described by these models, such as photodegradation and photocatalysis. These atmospheric processes are influenced by meteorological parameters, including temperature, relative humidity, wind speed, atmospheric pressure, solar radiation, UV index, and OH radicals.51 In a previous study, temperature (R = 0.789, p < 0.01), humidity (R = 0.525, p < 0.01), solar radiation (R = 0.429, p < 0.01), wind speed (R = −0.456, p < 0.01), and atmospheric pressure (R = −0.634, p < 0.01) have been correlated with the gas-phase OPFR concentration.50 In previous research, the concentration of gaseous OPFRs has been found to have a significantly positive correlation with temperature and relative humidity.13 Higher relative humidity will cause the formation of liquid film covering the surface of the particle, which may disturb the interactions between the OPFRs and particle components via H-bonding or π–π bonding interactions.52 Greater wind speed is conducive to the diffusion, dilution and partition behavior of OPFRs.53 Hence, we analyzed the correlation between the influencing factors (log
KOA, temperature, wind speed, and relative humidity) and the deviation of the results predicted by each model. The results show that the deviation of values predicted by these models has a significant correlation with log
KOA (Table S5†). The deviations of the L–M–Y, H–B, and D–E models exhibit significant correlation with log
KOA, temperature, and relative humidity, suggesting that these parameters might be the main factors influencing the deviation. Therefore, log
KOA, temperature, and relative humidity are considered to be the main drivers of OPFR distribution in the particulate phase in the EQ domain.
As mentioned above, the L–M–Y model shows better consistency with the measured data in the NE and MP domains. Thus, the L–M–Y model was chosen as the basic model to develop an empirical steady state model. In the EQ domain, similar to the other models, the L–M–Y model also demonstrates a large deviation from the measured data of the OPFR compounds with strong volatility and low lipophilicity.
KOA (R2 = 0.87, p < 0.05), a relationship between the L–M–Y model-predicted deviations and log
KOA in the EQ domain was obtained as a linear regression:Δlog KP = 0.961 log KOA − 10.68 (EQ domain) | (11) |
Secondly, by combining eqn (3) and (11), the empirical equation in the EQ domain could be written as
log KP = 0.039 log KOA + log fOM + log α − 1.23 | (12) |
The percentage of measured data within the ADR of prediction increased from 23.1% in the original steady state model to 65.0% using the new empirical equation (eqn (12)), decreasing the impact coefficient of log
KOA from 1 to 0.039.
Furthermore, the Pearson correlation statistical method was applied for variable selection. Thus, log
KOA, relative humidity, and temperature might also be the reasons for data deviation in the EQ domain. A five-fold cross validation was adopted in modeling and validation to ensure the reliability and generalization ability of the model. The monitored data set used for modeling was randomly divided into five equally sized subsets, followed by 5 modeling and validation processes. Four subsets were selected as the modeling sets, and one subset was selected as the validation set each time. Considering these three parameters, a multilinear regression method was employed to establish the deviation equation for the OPFRs in the EQ domain using SPSS.22.0. In the established equations, the P-values of relative humidity were higher than 0.05. Therefore, log
KOA and temperature were considered as the main factors to reconstruct the equations using the above method. Five equations were derived to describe Δlog
KP based on log
KOA and temperature. The R2 values of the five equations were 0.750, 0.747, 0.755, 0.762, and 0.754, respectively. The P values were lower than 0.01. Finally, deviation of the data predicted by the L–M–Y model in the EQ domain improved:
Δlog KP = (0.966 ± 0.007)log KOA + (0.011 ± 0.001)T − (10.961 ± 0.062) | (13) |
Then, the empirical prediction equation was improved:
log KP = 0.034 log KOA + log fOM + log α − 0.011T − 0.949 | (14) |
As mentioned above, overestimation of the contribution of log
KOA and temperature is the main reason for the large deviation observed in the values predicted in the EQ domain. As shown in eqn (14), wet and dry deposition, organic matter, and temperature could affect the G/P partition of OPFRs. Based on the characteristics of individual OPFRs, chlorinated OPFRs are more resistant to degradation than non-chlorinated compounds. Low-molecular-weight OPFRs (TEP and TPP) are expected to evaporate more readily than polymeric compounds and be less-associated with airborne particulate matter.54 Some high-molecular-weight OPFRs containing benzene rings, such as TMPP, usually have good thermal and hydrolytic stability and high log
KOA values, and they are usually distributed in the particular phase at higher concentrations.24,42
In addition to the factors mentioned above, the gas particle partitioning behavior of OPFRs can be influenced by other environmental factors, such as solar radiation, UV index, and OH radicals.51 OPFRs can be preferentially removed from the atmosphere by photooxidation. If the reactivity of OPFRs is related to their molecular weight, photooxidation may explain the observed OPFR partition behavior.55
Then, the ADR of the improved empirical equation (eqn (14)) contained 75.8 ± 3.4% of the measured data points, as shown in Fig. 4, which represents a 10.8% increase compared with eqn (12) and a 52.7% increase compared with the original steady state model. The RMSE was 2.84 ± 0.04 for the improved empirical equation, in contrast to 4.52 ± 0.94 for the original steady state model. Therefore, eqn (14) can be considered the empirical equation for the G/P partitioning of OPFRs in the EQ domain.
![]() | ||
| Fig. 4 Percentage of data points in the ADRs of the steady state model and the new empirical equation. | ||
As shown in a previous article, wet and dry deposition are non-ignorable determining processes in the G/P partitioning of SVOCs, such as PBDEs,28 OCPs,33 and PCBs.35 In this work, an empirical equation without considering particle deposition was also derived, and the percentage of measured data points in the ADR was obviously lower than that obtained using eqn (14). Therefore, wet and dry deposition could also be an important factor for the G/P partitioning of OPFRs in the EQ domain.
Organic matter constitutes an important part of atmospheric particulate matter. According to eqn (14), the variation curves of log
KP with log
KOA at different organic matter concentrations are presented in Fig. S5.† As shown in Fig. S5,† the log
KP values of the OPFRs increased with an increase in fom in the whole EQ domain. When log
KOA < 10, the log
KP of OPFRs increased nearly by 1 log unit as fom increased from 0.1 to 0.9. When 10 < log
KOA < 11.4, the log
KP values of OPFRs increased slightly about 0.25, with the increase of fom from 0.1 to 0.9. Thus, organic matter is also a crucial factor that influenced the G/P partitioning of OPFRs in the equilibrium domain.
In the EQ domain, inflection points of log
KPvs. log
KOA of the OPFRs were observed in Fig. S5.† These inflection points mainly occurred at log
KOA values between 9.5 and 11.4. When log
KOA was below the inflection point, log
KP exhibited an increasing trend with respect to an increase in log
KOA. Conversely, log
KP decreased as log
KOA increased. Furthermore, the value of fom also affected the occurrence of these inflection points. The larger the fom, the smaller the log
KOA value at the inflection point. That is, the larger the fom, the higher the temperature at which the inflection point appeared. This is an interesting discovery. The underlying reasons also warrant further investigations in the future to provide comprehensive answers.
KP and values predicted by these models in the EQ domain. The results indicated that in the MP domain, a constant value of log
KP (−1.21) was observed for the OPFRs, which is close to the predicted log
KP-LMY value of −1.53. The steady state model shows some advantages on predicting the log
KP of OPFRs with 85.2% of data points in ADR and φP close to the measured data in the MP domain. The deviation between the steady state model and measured data could be a function of log
KOA and temperature. A new empirical equation was derived to achieve better consistency between the predicted and monitored data, and the percentage of data points in the ADR increased from 23.1% to 75.8% in the EQ domain. These results demonstrate that wet and dry deposition could also be an important process for the GPP of OPFRs in the EQ domain. The higher fOM value will lead to a higher log
KP value for OPFRs in the EQ domain, provided that all other conditions remain constant. Inflection points of log
KP with respect to log
KOA of the OPFRs have also been predicted in the EQ domain. Further research is required to discover the reasons behind the appearance of these inflection points.
Footnotes |
| † Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d4em00531g |
| ‡ Contributed equally as the first author. |
| This journal is © The Royal Society of Chemistry 2025 |