Issue 8, 2023

Eu-doped (Y0.85−xLa0.15)2O3 sesquioxide transparent ceramics for high-spatial-resolution X-ray imaging

Abstract

X-ray imaging has attracted considerable attention in the fields of environmental monitoring, industrial radiation detection, and biological health, and the key to X-ray imaging lies in the performance of scintillators. However, current single-crystal scintillators suffer from high cost, low doping concentration, and inhomogeneous distribution. Here, we report a (Y0.85−xLa0.15)2O3:xEu transparent ceramic scintillator prepared by vacuum sintering with uniform composition distribution and a transmittance of over 80.1% in the wavelength range of 632–1822 nm. The radioluminescence intensity of (Y0.79La0.15)2O3:6.0% Eu (λ = 611 nm) is 6.7 times higher than that of Bi4Ge3O12 (λ = 473 nm) and shows excellent radiation stability and fatigue resistance. In addition, the detection limit (129.8 nGy s−1) is lower than that required for X-ray diagnostics (5.5 μGy s−1). The prepared (Y0.85−xLa0.15)2O3:xEu transparent X-ray imaging demonstrates a high spatial resolution of 18.0 lp mm−1. Therefore, (Y0.85−xLa0.15)2O3:xEu transparent ceramics have the potential to be used for high-spatial-resolution X-ray imaging.

Graphical abstract: Eu-doped (Y0.85−xLa0.15)2O3 sesquioxide transparent ceramics for high-spatial-resolution X-ray imaging

Supplementary files

Article information

Article type
Paper
Submitted
11 Dec 2022
Accepted
20 Jan 2023
First published
01 Feb 2023

J. Mater. Chem. C, 2023,11, 2863-2870

Eu-doped (Y0.85−xLa0.15)2O3 sesquioxide transparent ceramics for high-spatial-resolution X-ray imaging

G. Feng, Y. Wu, H. Lu, R. Zhang, S. Wang and S. Wu, J. Mater. Chem. C, 2023, 11, 2863 DOI: 10.1039/D2TC05277F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements