Issue 18, 2023

Design of an amorphous ZnWSe2 alloy-based counter electrode for highly efficient dye-sensitized solar cells

Abstract

One of the biggest obstacles in the commercialization of dye-sensitized solar cells (DSSCs) is the use of the very expensive and rare platinum (Pt) catalytic material as a reference counter electrode (CE). Since finding new CE materials for replacing the state-of-the-art Pt is still challenging, the discovery of low-cost CE materials with superior catalytic activity is of paramount importance. Here, innovative and effective ZnWSe2 alloy CE materials in the amorphous structure are designed with different Zn ratios by the magnetron sputtering route and employed in DSSC applications to overcome the above-mentioned challenges of Pt CE. The formation of an amorphous phase with various Zn contents is further verified using theoretical calculations. Various electrochemical measurements such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and Tafel demonstrate that the optimum ZnWSe2 (denoted as ZnWSe2-3) alloy-based CE material possesses superior electrocatalytic activity, electrochemical stability, and fast reaction kinetics for an iodide/triiodide (I/I3) redox pair. Thanks to its low charge transfer resistance, high electrical conductivity, and large surface area, the cell employing ZnWSe2-3 CE reaches a power conversion efficiency (PCE) of 8.27% with enhanced short circuit current density (Jsc) and fill factor (FF) parameters, which are higher than those of DSSCs based on Pt (7.56%), WSe2 (6.35%), and other ZnWSe2-based CEs (6.20 to 7.41%). In addition to its improved photovoltaic (PV) performance, the cell employing ZnWSe2-3 CE exhibits prolonged photostability under operational conditions. This facile and efficient approach provides a promising direction to fabricate high-efficiency and electrochemically stable DSSCs. We thus believe that our work could provide an effective alternative for the design of high-performance and low-cost CE materials for PV applications.

Graphical abstract: Design of an amorphous ZnWSe2 alloy-based counter electrode for highly efficient dye-sensitized solar cells

Supplementary files

Article information

Article type
Research Article
Submitted
29 Mar 2023
Accepted
13 Jun 2023
First published
13 Jun 2023

Mater. Chem. Front., 2023,7, 4120-4131

Design of an amorphous ZnWSe2 alloy-based counter electrode for highly efficient dye-sensitized solar cells

D. A. Ari, A. Sezgin, M. Unal, E. Akman, I. Yavuz, F. C. Liang, M. Yilmaz and S. Akin, Mater. Chem. Front., 2023, 7, 4120 DOI: 10.1039/D3QM00320E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements