Issue 10, 2023

Contactless measurement of the photovoltage in BiVO4 photoelectrodes

Abstract

The power output of photoelectrochemical devices for solar energy-to-fuel conversion is determined by the photovoltage of the junction under illumination. In the presence of fast redox couples, the photovoltage can be obtained directly from current–voltage measurements of the device. However, for slow redox couples (H+/H2, O2/H2O) used in solar fuel photoelectrodes, photovoltage measurements are not straightforward, due to the kinetic overpotentials during charge transfer. Here we show that the photovoltage of BiVO4 electrodes in contact with fast electron donors KI, Na2SO3 or H2O2 or K4Fe(CN)6 can be measured in a contactless way with vibrating Kelvin probe surface photovoltage (SPV) spectroscopy. The photovoltage varies with illumination wavelength and intensity and matches the open circuit potential of the electrodes, obtained separately from electrochemical measurements. Plots of the photovoltage versus irradiance can be used to predict the oxidizing power of each electrode under zero applied bias. Except for K4Fe(CN)6, which causes shunting in the BiVO4 electrode, photovoltage values correlate well with the built-in potential of each junction. The ability to obtain photovoltage information through contactless SPV measurements will be useful in the search for solid–liquid junctions with superior energy conversion properties.

Graphical abstract: Contactless measurement of the photovoltage in BiVO4 photoelectrodes

Supplementary files

Article information

Article type
Paper
Submitted
27 Jun 2023
Accepted
18 Aug 2023
First published
31 Aug 2023

Energy Environ. Sci., 2023,16, 4530-4538

Author version available

Contactless measurement of the photovoltage in BiVO4 photoelectrodes

S. Daemi, A. Kundmann, K. Becker, P. Cendula and F. E. Osterloh, Energy Environ. Sci., 2023, 16, 4530 DOI: 10.1039/D3EE02087H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements