Developing NiMoO4-based multifunctional cathode for hybrid zinc battery

Bin Jia; Di Zhu; Shengyao Zhou; Shanshan Luo; Zhaolin Liu; Bing Li; Ming Liu

doi:10.1039/D2CC06413H

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

Developing NiMoO₄-based multifunctional cathode for hybrid zinc battery†

Bin Jia,

^a Di Zhu,^a Shengyao Zhou,^a Shanshan Luo,^a Zhaolin Liu,

*^b Bing Li*^a and Ming Liu*^a

Author affiliations

* Corresponding authors

^a School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China
E-mail: bing.li2020@hit.edu.cn, liuming0117@hit.edu.cn

^b Institute of Materials Research and Engineering (IMRE), A*STAR (Agency for Science, Technology and Research), 2 Fusionopolis Way, Innovis, #08-03, Singapore 138634, Republic of Singapore
E-mail: zl-liu@imre.a-star.edu.sg

Abstract

Herein, we developed a multifunctional cathode (Co-NiMoO₄/NF) based on nickel molybdate nanowires grown on Ni foam (NiMoO₄/NF) for a hybrid zinc-nickel (Zn–Ni) and zinc-air (Zn–Air) battery. NiMoO₄/NF demonstrated a high capacity and good rate capability in the Zn–Ni battery. The subsequent coating of the Co-based oxygen catalyst resulted in the Co-NiMoO₄/NF and enabled the battery to exhibit the advantages of both batteries.

Download options Please wait...

Supplementary files

Supplementary information PDF (1338K)

Article information

DOI: https://doi.org/10.1039/D2CC06413H
Article type: Communication
Submitted: 26 Nov 2022
Accepted: 07 Feb 2023
First published: 07 Feb 2023

Download Citation

Chem. Commun., 2023,59, 2950-2953

Permissions

Request permissions

Developing NiMoO₄-based multifunctional cathode for hybrid zinc battery

B. Jia, D. Zhu, S. Zhou, S. Luo, Z. Liu, B. Li and M. Liu, Chem. Commun., 2023, 59, 2950 DOI: 10.1039/D2CC06413H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Social activity

Fetching data from CrossRef.
This may take some time to load.

Chemical Communications