View PDF VersionPrevious ArticleNext Article

Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/D2NR90086F (Correction) Nanoscale, 2022, 14, 6671-6671

Correction: Soft electrothermal actuators using silver nanowire heaters

Shanshan Yao , Jianxun Cui , Zheng Cui and Yong Zhu *
Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC 27695, USA. E-mail: yong_zhu@ncsu.edu

Received 20th April 2022 , Accepted 20th April 2022

First published on 27th April 2022

Abstract

Correction for ‘Soft electrothermal actuators using silver nanowire heaters’ by Shanshan Yao et al., Nanoscale, 2017, 9, 3797–3805, https://doi.org/10.1039/C6NR09270E.

The authors regret an error in eqn (1). The corrected version of eqn (1) and the corresponding text is as follows:

The input electrical power P is related to the voltage V and the resistance R by P = V2/R. The saturation temperature of the heater can be determined by1,2

 
image file: d2nr90086f-t1.tif(1)
where t is the time, T0 is the room temperature, C is the heat capacity, m is the mass, and Qd is the total heat dissipated.

The authors confirm that the results and conclusions are not affected by this change.

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.

References

  1. J. Li, J. Liang, X. Jian, W. Hu, J. Li and Q. Pei, Macromol. Mater. Eng., 2014, 299, 1403–1409 CrossRef CAS.
  2. D. Jung, M. Han and G. S. Lee, J. Vac. Sci. Technol., B: Nanotechnol. Microelectron.: Mater., Process., Meas., Phenom., 2014, 32, 04E105 Search PubMed.
This journal is © The Royal Society of Chemistry 2022
Click here to see how this site uses Cookies. View our privacy policy here.