Issue 16, 2022

Plasmonic crescent nanoarray-based surface lattice resonance sensor with a high figure of merit

Abstract

Due to the natural accumulation of radiation losses arising from the localization and random arrangement of nanoparticles, the figure of merit (FOM) of localized surface plasmon resonance (LSPR) sensors is usually very low (the value is usually less than 5 RIU−1). However, radiation losses of individual particles will be offset by adjusting the phase of the scattered field which is dependent on the structure parameters of arrays. Based on this, a two-dimensional periodic crescent nanoarray-based surface lattice resonance (SLR) sensor with a high FOM is proposed in this work. Some significant results have been obtained by mode field analysis and adjustment of structural parameters. On the one hand, the line-shape of the SLR spectrum is divided into a Fano-like line and a separate line. And the former usually has an FOM of 101 magnitude while the latter has an FOM of 103 magnitude. On the other hand, the relative size of the excitation wavelengths between SLR and LSPR is also vital. The FOM is higher but resonance depth decreases faster when the relative size increases. In this work, a full width at half-maximum (FWHM) of less than 0.5 nm and FOM of more than 1000 RIU–1 (the quality factor is more than 3000) are achieved by the proposed crescent nanoarrays. In addition, this structure demonstrates that plasmonic nanoarray-based SLR has enormous potential in trace substance detection.

Graphical abstract: Plasmonic crescent nanoarray-based surface lattice resonance sensor with a high figure of merit

Article information

Article type
Paper
Submitted
20 Dec 2021
Accepted
13 Mar 2022
First published
14 Mar 2022

Nanoscale, 2022,14, 6144-6151

Plasmonic crescent nanoarray-based surface lattice resonance sensor with a high figure of merit

L. Wang, Q. Wang, T. Wang, W. Zhao, X. Yin, J. Jiang and S. Zhang, Nanoscale, 2022, 14, 6144 DOI: 10.1039/D1NR08341D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements