Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Low-cost rapid prototyping and assembly of an open microfluidic device for a 3D vascularized organ-on-a-chip
Qinyu
Li
a,
Kai
Niu
a,
Ding
Wang
a,
Lian
Xuan
b and
Xiaolin
Wang
*abc
aDepartment of Micro/Nano Electronics, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, P. R. China. E-mail: xlwang83@sjtu.edu.cn
bInstitute of Medical Robotics, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
cNational Key Laboratory of Science and Technology on Micro/Nano Fabrication, Department of Micro/Nano Electronics, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Shanghai 200240, People's Republic of China
First published on 15th July 2022
Abstract
Correction for ‘Low-cost rapid prototyping and assembly of an open microfluidic device for a 3D vascularized organ-on-a-chip’ by Qinyu Li et al., Lab Chip, 2022, https://doi.org/10.1039/d1lc00767j.
The authors regret the omission of a reference from the original manuscript, which should have been numbered ref. 19. This reference is shown below as ref. 1.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
References
- J. Ko, Y. Lee, S. Lee, S.-R. Lee and N. L. Jeon, Adv. Healthcare Mater., 2019, 8, 1900328 CrossRef PubMed.
| This journal is © The Royal Society of Chemistry 2022 |