Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Additive-mediated intercalation and surface modification of MXenes
Jing
Zou†
a,
Jing
Wu†
b,
Yizhou
Wang†
c,
Fengxia
Deng†
d,
Jizhou
Jiang†
*ab,
Yizhou
Zhang
*ef,
Song
Liu
g,
Neng
Li
h,
Han
Zhang
i,
Jiaguo
Yu
h,
Tianyou
Zhai
*j and
Husam N.
Alshareef
*c
aSchool of Environmental Ecology and Biological Engineering, School of Chemistry and Environmental Engineering, Key Laboratory of Green Chemical Engineering Process of Ministry of Education, Engineering Research Center of Phosphorus Resources Development and Utilization of Ministry of Education, Wuhan Institute of Technology, Wuhan, Hubei 430205, P. R. China. E-mail: 027wit@163.com
bKey Laboratory of Rare Mineral, Ministry of Natural Resources, Geological Experimental Testing Center of Hubei Province, Wuhan, Hubei 430034, P. R. China
cPhysical Science and Engineering Division, Materials Science & Engineering, King Abdullah University of Science and Technology (KAUST), Thuwal, 23955-6900, Kingdom of Saudi Arabia. E-mail: husam.alshareef@kaust.edu.sa
dState Key Laboratory of Urban Water Resources and Environment, School of Environment, Harbin Institute of Technology, Harbin, 150090, P. R. China
eInstitute of Advanced Materials and Flexible Electronics (IAMFE), School of Chemistry and Materials Science, Nanjing University of Information Science & Technology, Nanjing, 210044, P. R. China. E-mail: yizhou.zhang@nuist.edu.cn
fKey Laboratory for Organic Electronics & Information Displays and Institute of Advanced Materials, Nanjing University of Posts and Telecommunications, Nanjing, 210023, P. R. China
gInstitute of Chemical Biology and Nanomedicine (ICBN), State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, P. R. China
hState Key Laboratory of Advanced Technology for Materials Synthesis and Processing, State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan, Hubei 430070, P. R. China
iShenzhen Engineering Laboratory of Phosphorene and Optoelectronics and Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, Shenzhen University, Shenzhen, 518060, P. R. China
jState Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, P. R. China. E-mail: zhaity@hust.edu.cn
First published on 16th March 2022
Abstract
Correction for ‘Additive-mediated intercalation and surface modification of MXenes’ by Jing Zou et al., Chem. Soc. Rev., 2022, DOI: 10.1039/d0cs01487g.
In the original article, the author affiliation for Jiaguo Yu was incorrect. The correct affiliations are as shown here.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
Footnote |
| † These authors contributed equally to this work. |
| This journal is © The Royal Society of Chemistry 2022 |