Issue 45, 2021

Bio-based, robust, shape memory, self-healing and recyclable elastomers based on a semi-interpenetrating dynamic network

Abstract

Fabricating materials with a combination of high toughness, and self-healing, shape memory and reprocessing properties, especially derived from renewable precursors, remains a challenge. Herein, we demonstrate a simple strategy to prepare a multifunctional elastomer based on a semi-interpenetrating dynamic network (semi-IDN) by using sustainable Eucommia ulmoides gum (EUG) as a raw material. The elastomer possessed high stretchability (∼876%) and high tensile strength (∼12.1 MPa) as well as good self-healing, solid plasticity and shape memory properties. Moreover, it can not only be reprocessed by hot pressing (tensile strength remains 92% after three times of reprocessing), but can also be recycled by dissolving with little effect on the structure and properties. In addition, a flexible electronic device is prepared by spraying hydroxylated multiwalled carbon nanotubes (MWCNTs-OH) on its surface, which exhibited good self-healing of electrical conductivity after damage. The semi-IDN concept provides a new pathway to prepare reprocessed materials, and the as-prepared elastomers have broad application prospects in new generation green rubber and flexible wearable devices.

Graphical abstract: Bio-based, robust, shape memory, self-healing and recyclable elastomers based on a semi-interpenetrating dynamic network

Supplementary files

Article information

Article type
Paper
Submitted
26 Jul 2021
Accepted
19 Sep 2021
First published
23 Sep 2021

J. Mater. Chem. A, 2021,9, 25399-25407

Bio-based, robust, shape memory, self-healing and recyclable elastomers based on a semi-interpenetrating dynamic network

X. Qi, J. Zhang, L. Zhang and D. Yue, J. Mater. Chem. A, 2021, 9, 25399 DOI: 10.1039/D1TA06299A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements