Issue 38, 2021

Dopant-induced cationic bivalency in hierarchical antimony-doped tin oxide nano-particles for room-temperature SO2 sensing

Abstract

The modification of simultaneously existing multiple oxidation states in host lattice cations via the introduction of dopants has been reported for NiO- and Co3O4-based gas-sensing materials. However, SnO2, a widely used material for chemiresistive gas sensing has never been reported with simultaneous presence of Sn2+ and Sn4+ states, in both the absence and presence of dopants. In this work, we demonstrated how antimony doping in a 3+ state triggers the generation of cationic bivalency in tin oxide-based gas sensors, and it is the quantitative presence of unstable Sn2+ species that determines the fate of SO2-sensing responses by antimony-doped tin oxide gas sensors. While the Sn2+ content in Sn0.856Sb0.144O2 is 1.2 times less than that of Sn0.957Sb0.043O2, the SO2 sensing response in the former is 1.2 times more than that in the latter. Greater antimony content in Sn0.856Sb0.144O2 also leads to the generation of additional trap states that result in sequential return of electrons back into the valence band. The reversibility of Sn2+ ↔ Sn4+ during SO2 adsorption and desorption brings out a new dimension of SnO2-based chemiresistors besides those already existing.

Graphical abstract: Dopant-induced cationic bivalency in hierarchical antimony-doped tin oxide nano-particles for room-temperature SO2 sensing

Supplementary files

Article information

Article type
Paper
Submitted
15 Apr 2021
Accepted
30 Aug 2021
First published
31 Aug 2021

J. Mater. Chem. A, 2021,9, 21824-21834

Dopant-induced cationic bivalency in hierarchical antimony-doped tin oxide nano-particles for room-temperature SO2 sensing

N. Chakraborty, P. K. Ghose, P. Rudra, S. Das, D. Saha, A. K. Mishra, A. Sanyal and S. Mondal, J. Mater. Chem. A, 2021, 9, 21824 DOI: 10.1039/D1TA03175A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements