Issue 31, 2021

N,P co-doped microporous carbon as a metal-free catalyst for the selective oxidation of alcohols by air in water

Abstract

The selective oxidation of alcohols is traditionally catalyzed by precious metals, where high cost, low selectivity, poor stability, and environmental concerns have hindered their wide application. Here we report a nitrogen and phosphorus co-doped microporous carbon (NPMC) as an efficient catalyst towards the selective oxidation of benzyl alcohol. NPMC is fabricated from one-step pyrolysis of an aerogel derived from the polymerization of p-phenylenediamine with phytic acid. The optimized NPMC exhibits high efficiency and universality for the selective oxidation of alcohols in an aqueous environment using air as the oxidant, due to its large surface area (∼676 m2 g−1), good hydrophilicity, and suitable microporous structure (1–2 nm), as well as the concerted effects between N and P doping. 50 mg of the catalyst is sufficient for affording almost quantitative amounts of benzyl alcohol oxidized to benzaldehyde without organic solvents and co-catalysts, and its catalytic performance is the best among the metal-free catalysts reported. The heterogeneous catalyst is also perfectly stable, and can be reused several times without significant loss of activity and selectivity.

Graphical abstract: N,P co-doped microporous carbon as a metal-free catalyst for the selective oxidation of alcohols by air in water

Supplementary files

Article information

Article type
Paper
Submitted
27 Apr 2021
Accepted
27 Jun 2021
First published
28 Jun 2021

New J. Chem., 2021,45, 13877-13884

N,P co-doped microporous carbon as a metal-free catalyst for the selective oxidation of alcohols by air in water

C. Xing, Y. Zhang, Y. Gao, Y. Kang and S. Zhang, New J. Chem., 2021, 45, 13877 DOI: 10.1039/D1NJ02042K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements