Issue 36, 2020

Coulomb barrier creation by means of electronic field emission in nanolayer capacitors

Abstract

The main mechanism of energy loss in capacitors with nanoscale dielectric films is leakage currents. Using the example of Al–Al2O3–Al, we show that there are two main contributions, namely the cold field emission effect and the hopping conductivity through the dielectric. Our main finding is that an application of a high electric field, ∼0.6–0.7 GV m−1, causes electrons to penetrate the dielectric. If the temperature is sufficiently low, such electrons become permanently trapped in the dielectric. To achieve a strong charging of the dielectric, the voltage needs to be high enough, so that a field emission occurs from the cathode into the dielectric. Such a strongly charged dielectric layer generates a Coulomb barrier and leads to a suppression of the leakage current. Thus, after the dielectric nanolayer of the capacitor is charged, the field emission and the hopping conductivity are both suppressed, and the hysteresis of the IV curve disappears. The phenomenon is observed at temperatures up to ∼225 K. It would be advantageous to identify insulators in which the phenomenon of the Coulomb barriers persists even up to the room temperature, but at this time it is not known whether such dielectrics exist and/or can be designed.

Graphical abstract: Coulomb barrier creation by means of electronic field emission in nanolayer capacitors

Article information

Article type
Paper
Submitted
19 Jun 2020
Accepted
20 Aug 2020
First published
26 Aug 2020

Nanoscale, 2020,12, 18761-18770

Author version available

Coulomb barrier creation by means of electronic field emission in nanolayer capacitors

E. Ilin, I. Burkova, T. Draher, E. V. Colla, A. Hübler and A. Bezryadin, Nanoscale, 2020, 12, 18761 DOI: 10.1039/D0NR04660D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements