Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Computer-aided design of high-efficiency GeTe-based thermoelectric devices
Min
Hong
ab,
Kun
Zheng
c,
Wanyu
Lyv
a,
Meng
Li
b,
Xianlin
Qu
c,
Qiang
Sun
b,
Shengduo
Xu
b,
Jin
Zou
*bd and
Zhi-Gang
Chen
*ab
aCentre for Future Materials, University of Southern Queensland, Springfield, Queensland 4300, Australia. E-mail: zhigang.chen@usq.edu.au
bSchool of Mechanical and Mining Engineering, The University of Queensland, Brisbane, Queensland 4072, Australia. E-mail: zhigang.chen@uq.edu.au; j.zou@uq.edu.au
cBeijing Key Lab of Microstructure and Property of Solids, Institute of Microstructure and Properties of Advanced Materials, Beijing University of Technology, Beijing, 100124, China
dCentre for Microscopy and Microanalysis, The University of Queensland, Brisbane, Queensland 4072, Australia
First published on 29th May 2020
Abstract
Correction for ‘Computer-aided design of high-efficiency GeTe-based thermoelectric devices’ by Min Hong et al., Energy Environ. Sci., 2020, DOI: 10.1039/d0ee01004a.
The authors regret errors in the author affiliations in the original manuscript. The corrected list of authors and affiliations for this paper is as shown above.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2020 |