Issue 3, 2021

The quantitative impact of fluid vs. solid interfaces on the catalytic performance of pickering emulsions

Abstract

Pickering emulsions (PEs), i.e. particle stabilized emulsions, are used as reaction environments in biphasic catalysis for the hydroformylation of 1-dodecene into tridecanal using the catalyst rhodium (Rh)–sulfoxantphos (SX). The present study connects the knowledge about particle–catalyst interactions and PE structure with the reaction results. It quantifies the efficiency of the catalytic performance of the catalyst localized in the voids between the particles (liquid–liquid interface) and the catalyst adsorbed on the particle surface (liquid–solid interface) using a new numerical approach. First, it is ensured that the overall packing density and geometry at the droplet interface and the size of the water droplets of the resulting w/o PEs are predictable. Second, it is shown that approximately all particles assemble at the droplet surface after emulsion preparation and neither the packing parameter nor the droplet size change with the particle surface charge or size when the total particle cross section is kept constant. Third, studies on the influence of the catalyst on the emulsion structure reveal that irrespective of the particle charge the surface active and negatively charged catalyst Rh–SX reduces the PE droplet size significantly and decreases the particle packing parameter from s = 0.91 (hexagonal packing in 2D) to s = 0.69 (shattered structure). In this latter case, large voids of the free w/o interface form and become covered with the catalyst. With a deep knowledge about the PE structure the reaction efficiencies of the liquid–liquid vs. the solid–liquid interface are quantified. By excluding any other influence factors, it is shown that the activity of the catalyst is the same at the fluid and solid interface and the performance of the reaction is explained by the geometry of the system. After the reaction, the catalyst retention via membrane filtration is shown to be successfully achieved without damaging the emulsions. This enables the continuous recovery of the catalyst, i.e. the most expensive compound in PE-based catalytic reactions, being a crucial criterion for industrial applications.

Graphical abstract: The quantitative impact of fluid vs. solid interfaces on the catalytic performance of pickering emulsions

Supplementary files

Article information

Article type
Paper
Submitted
20 Nov 2020
Accepted
16 Dec 2020
First published
16 Dec 2020

Phys. Chem. Chem. Phys., 2021,23, 2355-2367

The quantitative impact of fluid vs. solid interfaces on the catalytic performance of pickering emulsions

S. Stock, A. Schlander, M. Kempin, R. Geisler, D. Stehl, K. Spanheimer, N. Hondow, S. Micklethwaite, A. Weber, R. Schomäcker, A. Drews, M. Gallei and R. von Klitzing, Phys. Chem. Chem. Phys., 2021, 23, 2355 DOI: 10.1039/D0CP06030E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements