Issue 15, 2019

Selective electroless deposition of cobalt using amino-terminated SAMs

Abstract

The continuation of CMOS scaling leads to the necessity of replacing Cu as an interconnect material with a metal with lower resistivity and better reliability performance. At the same time, significant technological improvements are required to mitigate the pattern overlay requirements when forming multilevel structures with a half-pitch below 10 nm. Area-selective deposition (ASD) offers an elegant way to enable self-alignment of multilevel structures. However, defectivity is a typical bottleneck of ASD integration. This work explores the selective electroless deposition (ELD) of Co as a replacement of Cu as an interconnect metal. The selective metallization process is promoted by the selective placement of an amino-terminated organic layer in combination with confined grafting of a Pd catalyst. Co films thicker than 40 nm can be formed on amino-terminated surfaces, while the surfaces with no amino functionality remain completely free of Pd and Co according to EDS chemical analysis and SEM inspection. This article offers a detailed study of selective Co growth on blanket and patterned structures and investigation of the ELD Co film properties, such as low-temperature recrystallization at 420 °C, grain structure, chemical composition and segregation of impurities. It is demonstrated that the resistivity of the ELD Co films exhibits lower thickness dependence when compared to that of PVD Co, which can be attributed to the ELD Co grain size exceeding the Co film thickness. In addition, it is shown that the underlying organic layer prevents the silicidation of the annealed Co film on the Si substrate while promoting interface adhesion values as high as 8.2 J m−2 ± 0.7 J m−2 for a 50-nm thick Co film.

Graphical abstract: Selective electroless deposition of cobalt using amino-terminated SAMs

Supplementary files

Article information

Article type
Paper
Submitted
09 Jan 2019
Accepted
06 Mar 2019
First published
07 Mar 2019

J. Mater. Chem. C, 2019,7, 4392-4402

Selective electroless deposition of cobalt using amino-terminated SAMs

I. Zyulkov, S. Armini, K. Opsomer, C. Detavernier and S. De Gendt, J. Mater. Chem. C, 2019, 7, 4392 DOI: 10.1039/C9TC00145J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements