Wen
Shao‡
a,
Marcel
Lux
a,
Martin
Breugst
b and
Martin
Klussmann
*a
aMax Planck Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 2, 45470 Mülheim an der Ruhr, Germany. E-mail: klussmann@mpi-muelheim.mpg.de
bUniversität zu Köln, Department für Chemie, Greinstraße 4, 50939 Köln, Germany
First published on 18th April 2019
A Brønsted acid catalyzed method was developed for the synthesis of γ-cyanoketones from sulfonyl cyanides, olefins and ketones. The reaction is believed to proceed via intermediate formation of alkenyl peroxides by condensation of ketones with tert-butylhydroperoxide. These unstable compounds decompose by homolytic O–O bond cleavage, generating ketone-derived radicals which add to the olefins and generate the final products after reaction with the sulfonyl cyanide, thereby forming two new C–C bonds. A range of different ketones and olefins can be used, including steroidal ketones and simple alkyl olefins. The products can be further transformed to substituted lactones and piperidines, including a tetracyclic one. This reaction can thus be utilized to gain access to complex molecules from simple starting materials in only a few synthetic steps.
Scheme 1 Radical addition reactions via intermediate alkenyl peroxides (1) formed by acid catalysis. |
The generation of radicals in the α-position of ketones can be achieved by alternative means,5 but often it is only effective with 1,3-dicarbonyl compounds,6 at temperatures above 100 °C,7 with α-bromo-ketones as substrates8 and larger amounts of metal reagents,9 respectively. Their formation via alkenyl peroxides (1) by condensation with hydroperoxides, on the other hand, is particularly effective with plain ketones and only requires simple acids as catalysts. We were thus interested to extend the radical addition of ketones via this mechanism to the twofold addition of carbon-radicals instead of the carbo-peroxidation as in the synthesis of 2. Here, we report our results of the addition of ketones and cyanide to olefins (Scheme 1b).
We tested a variety of additional reagents to introduce a carbon residue instead of the peroxide group, but the peroxyketones 2 were always formed as major products. Overriding this preference was finally possible by employing sulfonyl cyanides 3 which led to formation of cyanoketones 4. Sulfonyl cyanides are well-known reagents for the transfer of a cyano group to carbon-radicals.10 For example, the Landais group used para-toluenesulfonic cyanide (pTsCN, 3a) in the radical addition of ester, thioester or amide residues to olefins, requiring the use of stoichiometric organometallic reagents and prefunctionalized substrates, respectively.10g–i Radical trifluoromethylation with hypervalent iodine reagents together with cyanation has been reported by several groups.11 The groups of Liu and Zhu reported an intramolecular CN-transfer after radical addition, requiring special olefin substrates.12 The strategy of an intramolecular CN-transfer had previously been employed by the groups of Kalvoda, Watt and Nikishin to synthesize γ-cyanoketones.13 However, the yield in those reactions was typically rather low. Zhu et al. also described such products via a radical ring-opening reaction of cyclobutanols in the presence of pTsCN.10f
γ-Cyanoketones can also be prepared in a single step by conjugate addition reactions of ketones to vinyl nitriles and of nitriles to enones, respectively, generally requiring strong bases or complex catalysts.14 Applying chiral catalysts, this can allow the stereoselective synthesis of the products, but at the same time requiring nitriles with electron-withdrawing groups in the α-position.15
The method we have developed could be complementary to those known cases. It uses readily available ketones and olefins and can be catalyzed by simple Brønsted acids. Directly adding ketone and cyanide radicals to an olefin could also allow the synthesis of γ-cyanoketones not easily accessible by the aforementioned methods.
Entry | R (3) | Solvent | Yieldb/% |
---|---|---|---|
a Screening reactions were typically performed with 0.5 mmol 5a, 1.25 mmol 6a, 0.25 mmol 3, 1.0 mmol tBuOOH and 0.025 mmol acid in 0.2–1.0 ml solvent under an argon atmosphere at 50 °C. b Determined by 1H-NMR. c Isolated yield, reaction at a scale of 0.5 mmol 3, 1.5 mmol 6a, 1.5 mmol tBuOOH and 1.0 ml of CH2Cl2. | |||
1 | pTol (3a) | EtOAc | 60 |
2 | pTol (3a) | CHCl3 | 48 |
3 | pTol (3a) | CH2Cl2 | 61 |
4 | Et (3b) | CH2Cl2 | 64 |
5 | Me (3c) | CH2Cl2 | 69 (63)c |
In those reactions, two byproducts could be characterized (Fig. 1). Peroxyketone 2aa – the product formed in the absence of sulfonyl cyanides2a – was found in low amounts of up to 10% only. Peroxy-sulfone167ac was formed in comparable, but generally lower yields than cyanoketone 4aa. In order to achieve good yields of the desired products, the olefin therefore has to be used in excess. Generally, sulfones 7 can easily be separated from nitriles 4 by column chromatography.
Using the conditions as of Table 1, entry 5, we investigated this method in the reactions of different ketones with styrene (Scheme 2). Simple open-chain and cyclic alkyl ketones gave the expected products 4aa–4ag. With methyl isopropyl ketone, the new bond was exclusively formed at the methyl group (4ab). Methyl aryl ketones afforded products 4ah–4al in similar yields. The successful utilization of phenolic ketone 6l in the synthesis of 4al is interesting, as many phenols are known as radical inhibitors. Two steroids, epiandrosterone 6m and pregnenolone 6n could be used as ketone component, giving the products 4am and 4an. The presence of a free hydroxyl group and an olefin in the ketone 6n did not hamper the yield significantly, as 4an was formed in a relatively good yield of 43%.
With pinacolone (6c) as a model ketone, we also tested the reaction with a variety of different aryl olefins (Scheme 3). A range of products 4bc–4nc with different aryl-substituents were formed in mostly good yields above 50%, with the exception of the strongly electron-withdrawing and -donating substituents CF3, CN and OMe (4fc–4hc). A methyl substituent in the ortho-position also gave a good yield of 60% of 4lc, but the ortho-bromide product 4nc gave a lower yield. Using indene (5q) as olefin gave the products 4qc and 4qe (using cyclohexanone) in good yields, which are remarkable for their high trans-selectivity. For 4qc, a diastereomeric ratio of >19:1 was determined in the crude reaction mixture, but after purification, we received the pure trans-product. In the case of 4qe, two diastereomers were isolated which differ in the configuration at the α-position of the cyclohexanone residue.
We also investigated the reaction between acetone or pinacolone and non-aryl olefins which on average gave lower yields than with styrene derivatives (Scheme 4). This is possibly due to the nature of the ketone-derived radicals, as this had also been observed during the synthesis of γ-peroxyketones.2a Noteworthy exceptions were the use of 1-octene (8b) and 6-cyano-1-hexene (8e), providing yields above 50%. A natural product, limonene (8g) could be used as olefin component, albeit with only a rather low yield of 22% of product 9gc. Interestingly, in the reactions with these olefins, the sulfonyl peroxide byproducts 7 were observed in traces only and could not be isolated.
Cyanoketones have previously been utilized as valuable synthetic intermediates that can be converted to lactones and piperidines, respectively, by reduction and subsequent cyclization.14a,15c–e,17 We have also applied these strategies to selected products, without purification after the first step (Scheme 5). A substituted δ-valerolactone 10 was formed from product 4aa in a 1:1 mixture of diastereomers. Reduction of the nitrile group by hydrogenation in the presence of RANEY® Nickel and subsequent protection with a Boc-group gave piperidines 11 and 12 from cyanoketones 4ai and 4qe, respectively.
Interestingly, the major diastereomer of 11 was found to obtain a solution conformation with both aryl groups in axial position, as shown in Scheme 5 (determined by NMR coupling constants and an NOESY experiment, see the ESI† for details). This at first surprising result was supported by DFT calculations:18 this conformation was indeed found to be more stable than the one with both aryl groups in equatorial position by 3.3 kJ mol−1 and also more stable than alternative boat conformations. This results presumably from the avoidance of steric repulsion between the p-methoxyphenyl and the Boc group19 and from a favorable orbital interaction between the nitrogen lone pair and the σ*-bond of the C–aryl bond (see the ESI† for further details).
Tetracylic piperidine 12 was formed with a high preference for one diastereomer, as depicted in Scheme 5. The structure of the major one was confirmed by NMR spectroscopy and X-ray crystallography of the corresponding ammonium salt 13, which was isolated diastereomerically pure after recrystallization (see the ESI† for further details).
In accordance with our earlier mechanistic studies of alkenyl peroxide formation2b and based on the observation of byproducts 2 and 7, a radical mechanism appears reasonable (Scheme 6). Alkenyl peroxides 1 are formed by acid-catalyzed condensation of ketones and tBuOOH. Rapid homolytic O–O cleavage generates a tert-butyloxyl radical and resonance-stabilized radical 14, which adds to an olefin, forming the intermediate C-radical 15. Reaction with MeSO2CN10c generates the cyanoketones 4 and a sulfonyl radical 16. Rapid H-atom transfer from tBuOOH to the oxyl radical generates the tert-butyl peroxyl radical,20 which can attack 15, forming peroxyketone 2 as minor byproduct. Major byproduct 7 is formed by subsequent attack of a sulfonyl and peroxyl radical on an alkene.16,21
Footnotes |
† Electronic supplementary information (ESI) available: Detailed experimental and computational results. CCDC 1878410. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c9qo00447e |
‡ Present address: Department of Organic Chemistry, University of Geneva, Quai Ernest Ansermet 30, 1211 Geneva 4, Switzerland. |
§ The superiority of MsCN (3c) over pTsCN (3a) had already been noted before, see ref. 10c. |
This journal is © the Partner Organisations 2019 |