Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Scalable synthesis of one-dimensional Na2Li2Ti6O14 nanofibers as ultrahigh rate capability anodes for lithium-ion batteries
Chao
Wang
a,
Xing
Xin
*ab,
Miao
Shu
c,
Shuiping
Huang
*a,
Yang
Zhang
d and
Xing
Li
*ac
aFaculty of Science, College of Materials Science and Chemical Engineering, Ningbo University, Ningbo 315211, China. E-mail: lixing@nbu.edu.cn
bNational Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan
cKey Laboratory of Photoelectric Materials and Devices of Zhejiang Province, Ningbo 315211, China
dElectron Microscopy for Materials Science (EMAT), University of Antwerp, Groenenborgerlaan 171, 2020 Antwerp, Belgium
First published on 14th December 2018
Abstract
Correction for ‘Scalable synthesis of one-dimensional Na2Li2Ti6O14 nanofibers as ultrahigh rate capability anodes for lithium-ion batteries’ by Chao Wang et al., Inorg. Chem. Front., 2019, DOI: 10.1039/c8qi00973b.
The authors regret that the units for the current shown within Fig. 4a are incorrect. The axis label should display (mA) not (A). The correct version of Fig. 4 is shown below.
 | ||
| Fig. 1 (a) Cyclic voltammetry plots of the Na2Li2Ti6O14 nanofibers recorded using Swagelok-type cells at a scan rate of 0.1 mV s−1 from 1.0 V to 3.0 V. (b) Charge–discharge curves at various current densities. (c) Rate performance. (d) Charge–discharge curves at current densities of 1C. (e) Cycling performances at current densities of 1C. (f) Cycling performances at current densities of 10C. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © the Partner Organisations 2019 |