Hyun Soo
Han
a,
Sun
Shin
b,
Dong Hoe
Kim
b,
Ik Jae
Park
b,
Ju Seong
Kim
b,
Po-Shun
Huang
c,
Jung-Kun
Lee
c,
In Sun
Cho
*d and
Xiaolin
Zheng
*a
aDepartment of Mechanical Engineering, Stanford University, Stanford, CA 94305, USA. E-mail: xlzheng@stanford.edu
bDepartment of Materials Science and Engineering, Seoul National University, Seoul, Korea
cDepartment of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA 15261, USA
dDepartment of Materials Science & Engineering, and Energy Systems Research, Ajou University, Suwon 16499, Korea. E-mail: insuncho@ajou.ac.kr
First published on 29th March 2019
Correction for ‘Boosting the solar water oxidation performance of a BiVO4 photoanode by crystallographic orientation control’ by Hyun Soo Han et al., Energy Environ. Sci., 2018, 11, 1299–1306.
Fig. 4 Surface modification of a p-BVO photoanode. (a) Top-view SEM image and (b) AFM topography and height profiles of surface-etched p-BVO. The striped pattern had a span of ∼70 nm and pitches of ∼30 nm. J–V curves of best-performing BVO-based photoanodes (c) without electrocatalysts1–4 and (d) with electrocatalysts reported to date.1,4–6 The p-BVO photoanode described herein outperformed all previously reported analogs, showing Jph ≈ 6.1 mA cm−2 at 1.23 VRHE after Co–Pi electrocatalyst deposition (AM1.5G illumination, 100 mW cm−2).
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
This journal is © The Royal Society of Chemistry 2019 |