Issue 2, 2019

Aggregated-fluorescent detection of PFAS with a simple chip

Abstract

In this study, aggregation-induced emission luminogens (AIEgen) are used for the detection of per- and poly-fluoroalkyl substances (PFAS) including perfluorooctanoic acid (PFOA), perfluorooctanesulfonic acid (PFOS) and 1H,1H,2H,2H-perfluorooctanesulfonic acid (6:2FTS). A solution of acetone–water (solvent) containing AIE-PFAS is first formulated. From this solution, one droplet (1–2 μL) is dropped and trapped into a hole in a chip made of glass slide. When the droplet is exposed to air, both water and acetone can vaporise, but acetone vaporises much more quickly than water does due to its higher vapour pressure. Consequently, with the solvent volume shrinking, the concentrations of AIE and PFAS increase in the shrinking droplet while the water percentage increases. At a certain stage of this process, the micelle of PFAS surfactant forms, accompanied by AIE aggregation. After completely vaporising and drying on the bottom of the chip-hole, the aggregated AIE features fluorescence, the density of which can be effectively linked to the concentration of PFAS surfactant. Thus, a simple sensor is developed for PFAS detection in the range of 0.1–100 μM (41 ppb to 41 ppm for PFOA) within around 1 min using a 1–2 μL PFAS sample.

Graphical abstract: Aggregated-fluorescent detection of PFAS with a simple chip

Article information

Article type
Paper
Submitted
01 Nov 2018
Accepted
16 Nov 2018
First published
20 Nov 2018

Anal. Methods, 2019,11, 163-170

Aggregated-fluorescent detection of PFAS with a simple chip

C. Fang, J. Wu, Z. Sobhani, Md. A. Amin and Y. Tang, Anal. Methods, 2019, 11, 163 DOI: 10.1039/C8AY02382D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements