Issue 42, 2018

An efficient, rapid, and non-centrifugation synthesis of nanosized zeolites by accelerating the nucleation rate

Abstract

Access to nanosized zeolites is a topical subject due to the advantageous mass transfer in zeolite catalyzed reactions. Herein we report a low-cost and generalized methodology to decrease zeolite crystal sizes by accelerating the nucleation rate when reducing the solvent amount in the synthesis. As anticipated, nanosized zeolites like MFI (100–200 nm, Si/Al ratios from 100 to ∞ in the starting gels) and BEA (50–200 nm, Si/Al ratio of 13) have been successfully synthesized with a H2O/SiO2 ratio of 2.0–3.0. The lower consumption of water as the solvent in the synthesis leads to non-centrifugation for nanosized zeolites, giving higher yields of the zeolite product. Experimental data confirm lower apparent activation energy for nucleation at higher gel concentrations in the synthesis of ZSM-5 zeolites. Catalytic examination of the conversion of methanol to olefins (MTO) demonstrates that the thus-obtained nanosized ZSM-5 zeolite (NS-ZSM-5) exhibits a much longer catalyst lifetime than conventional ZSM-5 (C-ZSM-5) and even nanosized ZSM-5 crystals (NC-ZSM-5) obtained from a hydrothermal route.

Graphical abstract: An efficient, rapid, and non-centrifugation synthesis of nanosized zeolites by accelerating the nucleation rate

Supplementary files

Article information

Article type
Paper
Submitted
25 Jul 2018
Accepted
01 Oct 2018
First published
05 Oct 2018

J. Mater. Chem. A, 2018,6, 21156-21161

An efficient, rapid, and non-centrifugation synthesis of nanosized zeolites by accelerating the nucleation rate

C. Zhang, Q. Wu, C. Lei, S. Han, Q. Zhu, S. Maurer, D. Dai, A. Parvulescu, U. Müller, X. Meng and F. Xiao, J. Mater. Chem. A, 2018, 6, 21156 DOI: 10.1039/C8TA07171C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements