View PDF VersionPrevious ArticleNext Article

Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/C8NR90018C (Correction) Nanoscale, 2018, 10, 3068-3068

Correction: 3D polymer objects with electronic components interconnected via conformally printed electrodes

Yejin Jo ab, Ju Young Kim a, Sungmook Jung a, Bok Yeop Ahn c, Jennifer A. Lewis c, Youngmin Choi *ab and Sunho Jeong *ab
aDivision of Advanced Materials, Korea Research Institute of Chemical Technology (KRICT), 19 Sinseongno, Yuseong-gu, Daejeon 305-600, Korea. E-mail: youngmin@krict.re.kr; sjeong@krict.re.kr
bDepartment of Chemical Convergence Materials, Korea University of Science and Technology (UST), 217 Gajeongno, Yuseong-gu, Daejeon 305-350, Korea
cWyss Institute for Biologically Inspired Engineering, John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, USA

Received 17th January 2018 , Accepted 17th January 2018

First published on 26th January 2018

Abstract

Correction for ‘3D polymer objects with electronic components interconnected via conformally printed electrodes’ by Yejin Jo, et al., Nanoscale, 2017, 9, 14798–14803.

(1) On page 14799, left column, the sentence beginning “The thermoplastic SIS tri-block copolymer…” contains an incorrect temperature value. The correct sentence should read “The thermoplastic SIS tri-block copolymer, which consists of isoprene segments with glass transition temperature below −60 °C, promotes good adhesion properties to the underlying 3D polymer surfaces17 (Fig. S1†).

(2) In Fig. 1a of the published article, the chemical ratio (x + z)[thin space (1/6-em)]:[thin space (1/6-em)]y = 22[thin space (1/6-em)]:[thin space (1/6-em)]88 is incorrect. The correct ratio should be given as (x + z)[thin space (1/6-em)]:[thin space (1/6-em)]y = 22[thin space (1/6-em)]:[thin space (1/6-em)]78.

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.

This journal is © The Royal Society of Chemistry 2018