Johanna
Simon
ab,
Laura K.
Müller
b,
Maria
Kokkinopoulou
b,
Ingo
Lieberwirth
b,
Svenja
Morsbach
b,
Katharina
Landfester
b and
Volker
Mailänder
*ab
aDermatology Clinic, University Medical Center of the Johannes Gutenberg-University Mainz, Langenbeckstr. 1, 55131 Mainz, Germany. E-mail: volker.mailaender@unimedizin-mainz.de
bMax Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany
First published on 24th May 2018
Formation of the biomolecular corona ultimately determines the successful application of nanoparticles in vivo. Adsorption of biomolecules such as proteins is an inevitable process that takes place instantaneously upon contact with physiological fluid (e.g. blood). Therefore, strategies are needed to control this process in order to improve the properties of the nanoparticles and to allow targeted drug delivery. Here, we show that the design of the protein corona by a pre-formed protein corona with tailored properties enables targeted cellular interactions. Nanoparticles were pre-coated with immunoglobulin depleted plasma to create and design a protein corona that reduces cellular uptake by immune cells. It was proven that a pre-formed protein corona remains stable even after nanoparticles were re-introduced to plasma. This opens up the great potential to exploit protein corona formation, which will significantly influence the development of novel nanomaterials.
Rapid recognition of nanoparticles by immune cells causes their fast clearance from the blood stream and therefore prevents interactions with targeted cells.6,7 This process is mainly governed by the adsorption of blood proteins towards the nanoparticles’ surfaces. The adsorption happens immediately when nanoparticles enter the blood stream and has been termed ‘biomolecular or protein corona formation’.8–10 Specific proteins such as immunoglobulins11 and complement proteins12 are known to mediate interactions with phagocytic cells and hereby influence the clearance process (‘opsonization’).13,14 There are different reports, which could prove a direct recognition of corona proteins by specific cell-receptors. For example, Lara et al. developed an immuno-mapping technique and was herby able to show that corona proteins (e.g. immunoglobuline G) present functional motifs, which allow an interaction with FcγI receptors.15 Other studies indicated that corona proteins are denatured upon binding towards the nanoparticles’ surface and therefore, the unfolded protein can be recognized via scavenger receptors.16,17
To overcome the issue of opsonization, several approaches have been developed in order to mask the nanoparticles from phagocytic cells.18 Coating the nanoparticles’ surface with hydrophilic polymers e.g. poly(ethylene glycol) (PEG) is the common strategy to prolong the blood circulation (‘stealth effect’) and hereby enabling the nanoparticle to reach the desired target.19 This effect has been widely described to be a result of reduced protein interactions with PEGylated surfaces.20 However, several reports indicated that PEGylation cannot completely abolish protein adsorption.21,22 On top of this, Hamad and colleagues23 could show that PEG can even trigger the activation of the complement system.
Therefore, alternative strategies are needed to improve the properties of targeted nanoparticles in vivo.24 Various studies have investigated the effect of corona formation on nanoparticle targeting.25 It was found that nanoparticles can recruit specific proteins from plasma, which eventually promote interactions with targeted cells.26 Adsorption of apolipoproteins to polysorbate 80-coated nanoparticles was shown to enhance the transport of nanoparticles across the blood brain barrier.27 Additionally, Caracciolo et al. saw that the adsorption of vitronectin can enhance cellular interactions with cancer cells.28 Further, we already showed that due to a pre-formed protein corona nanoparticle aggregation in blood plasma is prevented.29 Next to this, other studies demonstrated that the cytotoxicity of nanoparticles was strongly reduced if nanoparticles were pre-coated with cell culture medium containing FBS.30,31 This highlights the great potential to exploit corona formation.
To take this one-step forward, we aimed to create a pre-formed protein corona, which enables controlled cellular interactions. Here, it was intended to engineer nanoparticles with stealth properties mediated only through corona proteins. Immunoglobulins (IgG) are one major class of proteins (‘opsonins’), which are known to enhance cellular uptake by macrophages via interactions with the Fc receptor.32 Therefore, we removed IgG from human plasma via affinity chromatography. This protein fraction (‘IgG depleted plasma’) was chosen as a protein coating in order to create a pre-formed protein corona, which should prevent interactions with macrophages. To explore the stealth properties of the pre-formed protein, we analyzed the cellular interactions of uncoated and pre-coated nanoparticles with a macrophage cell line (RAW264.7). Next, the major aspect of our work focused on the question, whether the pre-adsorbed corona proteins are exchanged or covered by other proteins over time, when pre-coated nanoparticles are re-exposed to human plasma. This question needs to be addressed in order to reveal if nanoparticle pre-coating is an effective strategy to enable controlled cellular interactions in vivo. To answer this question, we carried out a detailed proteomic analysis (LC-MS). Additionally, dynamic light scattering (DLS) and isothermal titration (ITC) experiments were used to study the direct interaction of uncoated and pre-coated nanoparticles with plasma proteins.
Taking this together, we could prove that a pre-formed protein corona remains stable, which further implies that pre-coating of nanoparticles is a feasible method to engineer the protein corona and to obtain tailored protein corona properties for targeted cell interactions.
PS-COOH | PS-NH2 | |||
---|---|---|---|---|
Protein coating | Uncoated | Coated | Uncoated | Coated |
Diameter | 130 ± 13 nm | 164 ± 16 nm | 150 ± 15 nm | 162 ± 16 nm |
ζ-Potential | −27 ± 8 mV | −17 ± 9 mV | +4 ± 1 mV | −29 ± 6 mV |
Dynamic light scattering experiments (DLS) indicate a minor size increase (∼20 nm) after protein coating, which is attributed to protein corona formation.29,33 Additional transmission electron microscopy images (TEM) confirmed the protein layer surrounding the nanoparticles as found in previous reports33 (Fig. 1A). To characterize the biological identity of nanoparticles after protein coating, the exact protein corona composition was identified by LC-MS (Fig. 1B and C).
Therefore, nanoparticles were incubated with IgG depleted plasma to allow corona formation, and afterwards centrifuged and washed (see material/methods).9 As shown before, the surface functionalization of the nanoparticles strongly influences the protein adsorption pattern.34,35 Coated carboxy-functionalized nanoparticles (PS-COOH) were surrounded by a protein layer, which was strongly enriched by fibrinogen (∼74%). In contrast, hemopexin (∼38%) and clusterin (∼20%) were the major hard corona proteins for coated amino-functionalized nanoparticles (PS-NH2). A full list of all identified proteins giving the relative values in % and absolute amounts in fmol is supplemented in a separate Excel File Table S1.†
IgG depleted plasma was chosen as protein coating as it was intended to reduce the interaction of pre-coated nanoparticle with phagocytic cells in order to obtain stealth properties (Fig. 2A). Therefore, cellular uptake towards macrophages (RAW264.7) of uncoated and pre-coated nanoparticles was analyzed via flow cytometry (Fig. 2B) and confocal laser scanning microscopy (Fig. 2C).
To present the principal mechanism, we first summarized a detailed analysis for PS-COOH nanoparticles (Fig. 2 and 3). In the following section, we additionally focused on the investigations for PS-NH2 nanoparticles (Fig. 4).
Carboxy-functionalized nanoparticles were coated with IgG depleted plasma and applied to cell culture medium without additional proteins (marked as −plasma) or supplemented with plasma proteins (marked +plasma). This offered the possibility to study the influence of the pre-coating on the cellular uptake of nanoparticles and to investigate if the preformed protein corona (coating with IgG depleted plasma) is exchanged or remains stable after re-incubation with whole plasma (Fig. 2).
Flow cytometry analysis (Fig. 2B) and confocal laser scanning microscopy images clearly indicated the rapid uptake of uncoated PS-COOH nanoparticles in all cases (with or without plasma). Hence, cellular interactions of PS-COOH NPs pre-coated with IgG depleted plasma were strongly decreased (Fig. 2C). Most importantly, even if pre-coated NPs were re-introduced to plasma, cellular uptake was still reduced. This highlights that the obtained stealth properties due to the pre-formed protein corona were preserved meaning that pre-coating allowed us to control cellular uptake.
Based on this, we now wanted to focus on the interaction between plasma proteins and uncoated or pre-coated nanoparticles once they were introduced to whole plasma. Here, it was questioned how pre-coating influences protein corona formation (Fig. 3A). The hard protein corona of uncoated as well as pre-coated nanoparticles formed after incubation in full plasma was isolated via repetitive centrifugation and analyzed by Pierce Assay (Tables S2†), SDS PAGE (Fig. S3†) and LC-MS (Fig. 3B). We found that uncoated PS-COOH, which were incubated with full plasma, were surrounded by a protein corona, which was strongly enriched with vitronectin (∼33%). In contrast to this, we did not identify vitronectin as being highly abundant in the corona formed with IgG depleted plasma. Here, the hard corona of pre-coated nanoparticles was enriched with fibrinogen (Fig. 3B).
Next, we saw that there was no significant change in the protein adsorption pattern if pre-coated PS-COOH nanoparticles were re-introduced into whole plasma (Fig. 3C). This underlines the stability of the pre-formed protein corona (Fig. 3C). Hence, we noted minor differences in the corona composition. Re-adsorption of other plasma proteins (e.g. vitronectin) had occurred. Nevertheless, this did not affect cellular uptake decisively (Fig. 2).
To further investigate the properties of the pre-formed corona, isothermal titration calorimetry experiments (ITC) were carried out (Fig. 3D and raw data heat rates see Fig. S5†). Plasma was titrated to uncoated and coated PS-COOH NPs. With ITC it is possible to study the binding or adsorption behavior of proteins towards nanoparticles in situ.9,36 We observed a strong binding of plasma proteins towards uncoated PS-COOH NPs (black circles). This interaction was diminished when NPs were pre-coated (red circles), which further highlights the stealth properties of the pre-formed protein corona. This is in accordance with the cellular uptake that was shown to be strongly reduced if nanoparticles were pre-coated (Fig. 2).
As described in previous work, interactions of NPs with plasma proteins can cause aggregation of NPs hereby highly affecting their in vivo biodistribution.37 With multi angle dynamic light scattering (DLS) it is possible to monitor the size of nanoparticles incubated with plasma.29,38 This method allows studying direct interactions of proteins and nanoparticles without applying any washing step. When uncoated PS-COOH nanoparticles were applied to plasma, an overall size increase of ∼100 nm was measured indicating aggregation formation (Fig. 3E and raw data Fig. S6 and S7†). In strong contrast to this, we did not observe any size increase for pre-coated PS-COOH nanoparticles after plasma incubation. This underlines that the pre-formed protein corona remains stable after re-exposure to plasma.
Overall, we were able to present here a set of different analytical methods that can be generally applied to investigate if a defined pre-coating can enable targeted cell interaction. For the here chosen model system using IgG depleted plasma we were able to prove that pre-coating offers the possibility to tailor the biological properties of the nanoparticles.
As highlighted above (Fig. 1) and intensively studied in literature the nanoparticle charge can significantly influence protein corona formation34 and cellular uptake behavior.17 Therefore, we additionally explored the influence of pre-coating with IgG depleted plasma for amino-functionalized nanoparticles (PS-NH2) (Fig. 4). First, cellular internalization of uncoated and pre-coated PS-NH2 towards macrophages was studied followed by a detailed proteomic investigation of the hard protein corona.
For PS-NH2 nanoparticles we found that only in the absence of proteins (−plasma) nanoparticles are highly internalized (Fig. 4A and B). If plasma proteins were present (+plasma), cellular uptake was strongly reduced. Coated PS-NH2 nanoparticles (with IgG depleted plasma) displayed a significantly lower internalization rate compared to uncoated PS-NH2 in both cases (+with or −without plasma).
Analyzing the protein corona of uncoated PS-NH2 indicates a strong enrichment of clusterin (∼60%). Lower amounts of clusterin (∼20%) were observed for nanoparticles incubated with IgG depleted plasma (Fig. 4C). Clusterin has been identified as major corona protein of PEGylated nanoparticles19 and it was found that clusterin reduces interactions with macrophages.22 The here presented PS nanoparticles are stabilized with the non-ionic surfactant Lutensol AT50, which has a PEG analog structure and therefore the interaction with clusterin is favored.
We were able to confirm that via pre-coating with clusterin cellular uptake of the here investigated PS-NH2 was strongly decreased (Fig. 4D). However, it has to be noted that the uptake levels of PS-NH2 after plasma incubation were even lower meaning that also other corona proteins, their orientation or even other biomolecules (e.g. sugar, lipids) may contribute to this effect. Overall, this demonstrates that PS-NH2 nanoparticles are surrounded by a protein corona with natural stealth properties as due to plasma coating interactions with phagocytic cells are reduced.
Briefly, nanoparticles were synthesized via free-radical copolymerization miniemulsion technique. For amino-functionalized nanoparticles 2-aminoethyl methacrylate hydrochloride (AEMH, 90%, Sigma-Aldrich) was used whereas for carboxy-functionalized nanoparticles acrylic acid AA (99%, Sigma-Aldrich) was chosen.
Samples were spiked with 50 fmol μL−1 Hi3 E. coli (Waters) for absolute protein quantification and diluted with 0.1% formic acid. Tryptic peptides were applied towards a nanoACQUITY UPLC system which was coupled with a Synapt G2- Si mass spectrometer. Electrospray ionization (ESI) was conducted in positive ion mode with a NanoLockSpray source. Measurements were performed in resolution mode and data-independent acquisition (MSE) experiments were carried. Data was analyzed with MassLynx 4.1
For protein identification Progenesis GI (2.0) was used. Identified peptides were search against a reviewed human database downloaded from Uniprot. The analysis was carried out using the following criteria: one missed cleavage, max protein mass 600 kDa, fixed modifications for cysteine and carbamidomethyl, variable oxidation for methionine and a false discovery rate of 4%. For peptide identification, three fragments need to be identified whereas protein identification requires five fragments and two peptides. The TOP3/Hi343 quantification approach was chosen to determine the amount of fmol for each protein.
For nanoparticle uptake analysis, uncoated or pre-coated nanoparticles were applied to cells in medium without (−) or with plasma proteins (+) at a concentration of 75 μg mL−1 for 2 h. Afterwards, cells were washed with PBS and detached with 2.5% trypsin from cell culture wells. Flow cytometry measurements were performed with a CyFlow ML cytometer (Partec, Germany). The fluorescent dye Bodipy was excited with a 488 nm laser. Data was analyzed with FCS Express V4 software (DeNovo Software, USA). Values are expressed as median fluorescence intensity (MFI) as mean of at least three independent experiments.
Confocal laser scanning microscopy (cLSM) images were taken o LSM SP5 STED Leica Laser Scanning Confocal Microscope (Leica, Germany). Nanoparticles were excited with an argon laser (488 nm) and are pseudocolored in green. The cell membrane was stained with CellMaskOrange (2.5 μg mL−1, Invitrogen). The dye was excited with a laser DPSS 561 nm laser and the membrane was pseudocolored in red.
Footnote |
† Electronic supplementary information (ESI) available. See DOI: 10.1039/c8nr03331e |
This journal is © The Royal Society of Chemistry 2018 |