Issue 47, 2018

A highly sensitive SERS probe for bisphenol A detection based on functionalized Au@Ag nanoparticles

Abstract

Bisphenol A (BPA) usually exists in daily plastic products and its harmful effect on human health has been a popular topic. However, many conventional analytical methods need long sample preparation and measurement time, and some BPA biosensors suffer from the limitation of complex probe modification. Herein, we designed a simple SERS-coded aptamer sensor for BPA detection based on the electrostatic interaction between chitosan encapsulated 4-MBA coated Au@Ag NPs and anti-BPA aptamers. The negatively charged nucleic acid anti-BPA aptamer will cause the aggregation of the positively charged noble metal nano-reinforced substrate in acid buffer systems, resulting in a significant enhancement of the Raman signal. The specific binding of BPA with nucleic acid anti-BPA aptamers reduced the degree of aggregation of nanoparticles and weakened the SERS signal. This SERS-coded aptamer sensor had a wide linear range of 0.01–1 ng mL−1 and the limit of detection (LOD) was as low as 2.8 pg mL−1, and the method was successfully applied to detect BPA in bottled water within 15 min. As a rapid, simple, ultrasensitive and highly selective analytical technique for the detection of BPA, this SERS-based method would be important in biomedical diagnostics, environmental monitoring and food safety.

Graphical abstract: A highly sensitive SERS probe for bisphenol A detection based on functionalized Au@Ag nanoparticles

Supplementary files

Article information

Article type
Paper
Submitted
08 Sep 2018
Accepted
23 Oct 2018
First published
24 Oct 2018

Anal. Methods, 2018,10, 5622-5628

A highly sensitive SERS probe for bisphenol A detection based on functionalized Au@Ag nanoparticles

C. Wang, Y. Zeng, A. Shen and J. Hu, Anal. Methods, 2018, 10, 5622 DOI: 10.1039/C8AY01966E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements