Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: High quality graphene films with a clean surface prepared by an UV/ozone assisted transfer process
Hongyan
Sun
ab,
Ding
Chen
*a,
Yuming
Wu
b,
Qilong
Yuan
bc,
Liangchao
Guo
b,
Dan
Dai
b,
Kuan W. A.
Chee
c,
Yang
Xu
d,
Pei
Zhao
e,
Nan
Jiang
*b and
Cheng-Te
Lin
*b
aCollege of Materials Science and Engineering, Hunan University, Changsha 410082, P. R. China. E-mail: chending@hnu.edu.cn
bKey Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering (NIMTE), Chinese Academy of Sciences, Ningbo 315201, China. E-mail: linzhengde@nimte.ac.cn; jiangnan@nimte.ac.cn
cDepartment of Electrical and Electronic Engineering, University of Nottingham, Ningbo 315100, China
dEngineering and State Key Laboratory of Silicon Materials, Zhejiang University, Hangzhou, Zhejiang, 310027, China
eInstitute of Applied Mechanics and Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, Zhejiang University, Hangzhou 310012, P. R. China
First published on 4th April 2017
Abstract
Correction for ‘High quality graphene films with a clean surface prepared by an UV/ozone assisted transfer process’ by Hongyan Sun et al., J. Mater. Chem. C, 2017, 5, 1880–1884.
The authors regret the omission of one of the authors, Kuan W. A. Chee, from the original manuscript. The corrected list of authors and affiliations for this paper is as shown above.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2017 |