Jianan Yaoa,
Zhao Zhanga,
Chunbo Wanga,
Shengqi Maa,
Tianqi Lib,
Xiaogang Zhaoa,
Daming Wanga,
Hongwei Zhoua and
Chunhai Chen*a
aNational & Local Joint Engineering Laboratory for Synthesis Technology of High Performance Polymer, Key Laboratory of High Performance Plastics, Ministry of Education, College of Chemistry, Jilin University, Changchun, 130012, P. R. China. E-mail: cch@jlu.edu.cn
bState Key Laboratory of Supramolecular Structure and Materials, College of Chemistry, Jilin University, Changchun, 130012, P. R. China
First published on 21st November 2017
A simple strategy is provided to construct novel shape memory polyimides with both physical and chemical crosslinks. The resulting materials exhibited an ultrahigh strain and a multiple shape memory effect without sacrificing the shape fixity and recovery, thereby presenting its potential application in the aerospace industry.
Polyimides (PIs) possess outstanding properties such as thermal stability, superior tensile strength, and excellent radiation shielding capability.21 Polyimides exhibiting the shape memory effect (SME) might broaden potential applications in the aerospace industry, such as in deployable space structures, shape morphing structures, smart jet propulsion system, high-temperature sensors and actuators.22–28 Wang et al. prepared multi-shape memory polyimides by copolymerization, due to its rigid components with an Rr of 95.1% and a maximum strain of 48.9%.26 Vaia et al. developed dual-shape memory polyimides with a shape fixity (Rf) of 98% and an Rr of 98% using a low crosslink strategy, wherein a strain of 175% was achieved.29 Fully aromatic polyimides exhibit limited strain following deformation because the macromolecular chain possesses rigid chains and strong interchain interactions.30–32 These strong interactions originate from the intra- and interchain charge transfer complex (CTC) formations and electronic polarization. In our strategy, the introduction of –CF3 into the alignment of polymer chains' disrupts the formation of efficient CTCs, thereby creating materials with a high strain during deformation.33–35 In view of the above-mentioned factors, we selected 2,2′-bis[4-(3-aminophenoxy)phenyl]hexafluoropropane (m-6FBAPP) and 4,4′-(hexafluoroisopropylidene) (6FDA) with fluorinated groups to execute the polymerization reactions. In addition, 1,1,1-tris[4-(aminophenoxy)phenyl]ethane (TAPE) as non-coplanar crosslinker was incorporated into the macromolecular chain to produce chemical crosslinks, of which the detailed synthesis and characterization are shown in the ESI.† As illustrated in the 3D model structures of the crosslinked polyimides (Fig. 1), the formation of long repeating units and highly kinked structures results in massive chain entanglement and a flexible of the macromolecular chain. These produce a sufficient physical crosslink network and a high strain, which fulfills the requirements of the SMP. The chemical crosslinks of polyimides increase the Rr and the non-coplanar structure of TAPE generates an increase in the twisted conformation of the macromolecular chain without sacrificing the strain of SMP. In addition, appropriate chemical crosslinking points must be considered to eliminate any restrictions on the movement of the macromolecular chains to allow a large shape change. Hence, we designed light crosslinked polyimides with appropriate chemical and physical crosslinks. These polyimides not only exhibit strains as high as 460% with a relatively good Rr of 93.5%, but also exhibit excellent multi-shape memory effects.
The thermomechanical properties of PI-0 and PI-0.5 (with a 0.5% mole ratio crosslinker) samples were analyzed by dynamic mechanical analysis (DMA) to characterize their respective shape memory effects (Fig. 2a and b). No significant difference was observed in the storage modulus (E′) of PI-0 and PI-0.5 at the glass transition, wherein a sharp descent, specifically about three orders of magnitude, from the glassy state to the elastic plateau was observed. Above 300 °C, the curve of the PI-0 storage modulus exhibited a continuous decrease to the viscous state, and the data dropped below the DMA detection limits. However, PI-0.5 exhibited a slow increase, which should be attributed to the incomplete crosslinking of the polyimides following thermal imidization. Various polyimide crosslink densities were also investigated, of which the tanδ curves are shown in Fig. S3.† Due to the low crosslink density of the polyimides, little difference in the glass transition temperature (Tg) was observed. (Table S1†) However, an increase in the crosslink density was observed following a decrease in the height of the tan
δ peak, which is consistent with previous results on polymers with crosslinked systems.29
![]() | ||
Fig. 2 (a) Dynamic mechanical analysis curve of PI-0. (b) Dynamic mechanical analysis curve of PI-0.5. (c) Dual shape memory cycle for PI-0 at Td = Tr = 260 °C, Tf = 120 °C. Rf = 99.6%, Rr = 64.5%. (d) Dual shape memory cycle for PI-0.5 at Td = Tr = 260 °C, Tf = 120 °C. Rf = 99.4%, Rr = 93.5%. (See more details of Rfs and Rrs in Table S2 in the ESI†). Solid line: strain; dotted line: temperature; dashed line: stress. |
According to Fig. 2a and b, the dynamical mechanical curves also present shape memory effect information. Both PI-0 and PI-0.5 exhibited a decrease in their storage moduli, by about three orders of magnitude, thereby suggesting that both PI-0 and PI-0.5 possess SME. Firstly, we evaluated the dual-SME of the neat PI-0 polyimides (Fig. 2c).
PI-0 exhibited a 432% strain following deformation and a recovery temperature (Td and Tr) of 260 °C at a fixing temperature (Tf) of 120 °C, of which a high Rf of 99.6%, a poor Rr of 64.5%, and an about 160% residual strain was observed. In comparison, PI-0.5 exhibited a large strain of up to 460% with a Td of 260 °C, at a fixing temperature of 120 °C (Fig. 2d). It had a recovery temperature of 260 °C and exhibited a high Rf of >99.4% and a Rr of >93.5%. According to the results, the presence of triamine in the polyimides was beneficial for shape recovery given that chemical crosslinks restricted the chain from sliding.
The PI crosslinking density is essential in determining its shape memory performance. Therefore, the crosslinking density of PI was investigated over the range of 0.5%, 1%, 2%, and 5%, as demonstrated in Fig. S4a–c.† Following an increase in the crosslinking density, the polyimide strain exhibited a decrease from 460% to 34%, whereas Rr was not increased.
The results of the consecutive dual-shape memory cycling experiments are shown in Fig. S5a.† Four cycles were performed to investigate the effect of the deformation strain on the shape memory properties of PI-0.5 (Td = Tr = 230 °C, Tf = 120 °C). Each cycle exhibited a high Rf of >98.6%. In addition, an increase in the thermo-mechanical cycles, exhibited an increase in Rr from 85.5% to 94.9%, which was similar to the reported research.36,37 Notably, the shape memory strain increased following an increase in the number of cycles (Table S3†). This result can be explained by the fact that some macromolecular chains disentangled during stretching, thereby resulting in stress degradation. To compare the effect of the two different crosslinks, PI-5 was also compared to a higher crosslinker with consecutive dual-shape memory cycles (Fig. S5b†). Obviously, with an increase in the number of cycles, the PI-5 strain exhibited minimal change as compared to PI-0.5. In addition, the Rr of PI-5 was higher than that of PI-0.5 in each cycle, thereby validating the stability of the chemical crosslink as compared to the physical crosslink.
Based on the broad glass transition temperature interval at about 30 °C, a multi-stage recovery test was performed to verify the multiple shape memory effect, as illustrated in Fig. 3a. PI-0.5 recovered back to its original shape at a different temperature (220, 230, 240, 250, 260 °C), thereby validating the tuning ability of low density crosslinking polyimides at different programming temperatures to achieve multi-shape memory behaviour.
![]() | ||
Fig. 3 (a) Multi-stage shape recovery of PI-0.5 (Td = 260 °C). Triple-shape memory cycle of PI-0.5 with: (b) 260 °C + 220 °C, (c) 260 °C + 230 °C, (d) 260 °C + 240 °C (see more details of Rfs and Rrs in Table S4 in the ESI†). |
The recovery process of PI-0.5 temporary shape was heated continuously rather than keeping the temperature constant at a certain value,36 as shown in Fig. S6.† We found that the triple-shape memory of PI-0.5 recovered back to its original shape continuously with a constant heating, which was corresponding to the multi-stage recovery test. In addition, the triple-shape memory effect of PI-0.5 at different second deformation temperatures was demonstrated in Fig. 3b–d. The permanent shape S0 was first deformed at 260 °C and fixed at a second transition temperature (220 °C, 230 °C, 240 °C, respectively) to yield a temporary shape S1 under the same stress with a strain 116%, 97%, and 91%, respectively. PI-0.5 was then further stretched at the second transition temperature (STT) and fixed at 120 °C to yield the temporary shape S2 with a final strain of 422%, 398%, and 439%, respectively. Upon reheating to the STT and then to 260 °C, the sample recovered to S1,re and S0,re in sequence, wherein the detailed information are summarised in Table S4.† Interestingly, the first shape fixity was observed at 70.1%, 60.3%, and 43.2% at a STT of 220, 230, 240 °C, respectively. These results reflect the ability of light polyimides to exhibit triple-SMEs at any temperatures above the onset of the glass transition, though two of the deformation temperatures were farther apart to the benefit Rf and Rr.
Heuristically, quadruple-shape memory effects of PI-0.5 were also investigated as shown in Fig. 4a. With the relatively high fixity in quadruple-shape memory, good shape recovery (Rr(S3 → S2,re) = 96.8%, Rr(S2 → S1,re) = 87.8%, Rr(S1 → S0,re) = 66.2%) were also obtained and the strain up to 446% when the deformed temperature set as 260, 240, 220 °C, which is corresponding to the results of multi-stage recovery. The qualitatively characterization with pictures of PI-0.5 taken at different stages of the deformation and recovery process are shown in Fig. 4b.
Footnote |
† Electronic supplementary information (ESI) available. See DOI: 10.1039/c7ra11399d |
This journal is © The Royal Society of Chemistry 2017 |