Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Printable and flexible electronics: from TFTs to bioelectronic devices
M.
Magliulo
,
M. Y.
Mulla
,
M.
Singh
,
E.
Macchia
,
A.
Tiwari
,
L.
Torsi
and
K.
Manoli
*
Dipartimento di Chimica, Università degli Studi di Bari “A. Moro”, Via Orabona 4, 70126 Bari, Italy. E-mail: kyriaki.manoli@uniba.it
First published on 23rd December 2015
Abstract
Correction for ‘Printable and flexible electronics: from TFTs to bioelectronic devices’ by M. Magliulo et al., J. Mater. Chem. C, 2015, 3, 12347–12363.
There were errors in Fig. 1 and its caption where the term “injet printed” appeared instead of “aerosol-jet printed” for the first part of this figure. The correct version appears below:
 | ||
| Fig. 1 Images of different semiconductor deposition using printing techniques: aerosol-jet printed ZnO reprinted from ref. 7 and reproduced with permission from © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, roll to roll (R2R) NW reprinted from ref. 8 and reproduced with permission from © 2007 AIP Publishing LLC, inkjet printed P3HT nanowire/PS blend reprinted with permission from ref. 9 and reproduced with permission from © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, inkjet printed graphene reprinted from ref. 10 and reproduced with permission from © 2012 American Chemical Society. | ||
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
| This journal is © The Royal Society of Chemistry 2016 |