Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence

Transition-metal-nitride-based thin films as novel energy harvesting materials

Per Eklund *a, Sit Kerdsongpanya a and Björn Alling ab
aThin Film Physics Division, Linköping University, IFM, 581 83 Linköping, Sweden. E-mail: perek@ifm.liu.se
bMax-Planck-Institut für Eisenforschung GmbH, D-40237 Düsseldorf, Germany

Received 20th November 2015 , Accepted 12th February 2016

First published on 12th February 2016


Abstract

The last few years have seen a rise in the interest in early transition-metal and rare-earth nitrides, primarily based on ScN and CrN, for energy harvesting by thermoelectricity and piezoelectricity. This is because of a number of important advances, among those the discoveries of exceptionally high piezoelectric coupling coefficient in (Sc,Al)N alloys and of high thermoelectric power factors of ScN-based and CrN-based thin films. These materials also constitute well-defined model systems for investigating thermodynamics of mixing for alloying and nanostructural design for optimization of phase stability and band structure. These features have implications for and can be used for tailoring of thermoelectric and piezoelectric properties. In this highlight article, we review the ScN- and CrN-based transition-metal nitrides for thermoelectrics, and drawing parallels with piezoelectricity. We further discuss these materials as a models systems for general strategies for tailoring of thermoelectric properties by integrated theoretical–experimental approaches.


image file: c5tc03891j-p1.tif

Per Eklund

Per Eklund (PhD 2007) is Associate Professor and leads the Energy Materials Group of the Thin Film Physics Division at Linköping University, Sweden, where he joined the faculty in 2009. His main research interests encompass the wider area of thin-film ceramics primarily for energy applications, including thermoelectrics, ionic conductors, inherently nanolaminated ‘MAX phases’ and their 2D counterparts ‘MXenes’, and for electrical contacts and tools. Eklund has ∼100 published articles and an h index of 24. He is an ERC Starting Grant Holder, Wallenberg Academy Fellow, member of the Young Academy of Sweden (2011–2016), and Editor of the journal Vacuum.

image file: c5tc03891j-p2.tif

Sit Kerdsongpanya

Sit Kerdsongpanya received his BSc degree from Chulalongkorn University, Bangkok, Thailand, in 2008 and his MSc degree in the International Master's Programme at Linköping University in 2010. He graduated with a PhD from Linköping University in 2015 on the development and design of thermoelectric thin films of epitaxial ScN and ScN-based alloys. He is currently a postdoctoral researcher at Linköping University.

image file: c5tc03891j-p3.tif

Björn Alling

Björn Alling is currently (2015–2018) a visiting senior researcher at the Max-Planck-Institute for Iron Research (MPIE) in Düsseldorf, Germany. In parallel, he holds a permanent position as associate professor in Linköping. He has two PhD degrees, from EPFL in Lausanne, Switzerland (2009) and from Linköping University (2010). He has published ∼60 scientific papers and holds a Swedish Research Council International Career Grant. He has made important contributions to modeling of the complex material CrN and its alloys, method development for treatment of magnetic materials at high temperature, and alloy theory for multicomponent alloys.


I. Introduction

In the last few years, the early transition-metal and rare-earth nitrides, primarily based on ScN and CrN, have emerged as an unexpected class of materials for energy harvesting by thermoelectricity and piezoelectricity and more generally for conversion of heat or mechanical energy to electricity. Largely ignored for these purposes until around 2010, this class of materials is now on the rise because of a number of fundamental advances, among those the discoveries of exceptionally high piezoelectric coupling coefficient in (Sc,Al)N alloys1 and of remarkably high thermoelectric power factors of ScN-based2,3 and CrN-based4,5 thin films. These materials also constitute well-defined model systems for investigating thermodynamics of mixing for alloying and nanostructural design for optimization of phase stability and band structure. These features have implications for and can be used for tailoring of thermoelectric and piezoelectric properties.

The process of energy harvesting is the capture of energy from ambient sources and storage and/or application for use as power sources. There is a wide range of ambient sources, including solar, wind, electromagnetic radiation, mechanical (kinetic) energy, and thermal energy. Energy harvesting differs conceptually from, e.g., oil and coal power, fuel cells, or batteries, that involve active combustion of a fuel or conversion of stored chemical energy to electricity. Furthermore, the term energy harvesting is typically reserved for capturing energy for powering small, low-power devices, usually off-grid or otherwise autonomous. The term does not include, e.g., solar-power and wind-power plants, although the fundamental concept is the same.

In this highlight article, we review the ScN- and CrN-based transition-metal nitrides for energy-harvesting applications by thermoelectrics (harvesting of ambient heat), drawing parallels with piezoelectricity (harvesting of mechanical vibrations). It is further intended as an example of general strategies for tailoring of thermoelectric properties by integrated theoretical-experimental approaches.

II. Brief introduction to thermoelectricity

Thermoelectric devices harvest thermal energy (temperature gradients) into electricity, and can also be used for environmentally friendly refrigeration, without moving parts or malign liquids or gases. Most other conversion systems (such as power plants) become less efficient as they are scaled down in size and power, but thermoelectrics benefit from low- to medium-power and -size application. Thus, potential contributions of thermoelectrics are in applications with relatively low power levels used in large numbers (for example in personal computers, automotive applications, and consumer electronics). The efficiency of a thermoelectric material at a temperature T is related to the dimensionless figure of merit ZT, where Z = S2σ/κ. Here, σ and κ are the electrical and thermal conductivities, respectively, and S is the Seebeck coefficient ΔVT, i.e., the voltage in response to a temperature gradient. The thermal conductivity is given by κ = κl + κe, where the subscripts l and e denote the lattice (phonon) and electron contributions, respectively. Thus, a high ZT requires a good electrical conductor with high Seebeck coefficient but low thermal conductivity.6 For traditional thermoelectric materials like tellurides and antimonides, ZT ≈ 1 at room temperature. At first glance, it seems easy to increase ZT by, e.g., increasing the conductivity by a factor of 2–4. However, basic transport theory in solids implies that S, σ, and κ are interrelated; increasing σ by increasing the charge carrier concentration results in lower S and increased κ, yielding no improvement in ZT.

The delicate interdependence of the three parameters S, σ, and κ requires novel approaches to advance the field of thermoelectrics, which has led to extensive efforts on nanostructural design.7,8 Predictions in the mid-1990s suggested that ZT could be enhanced by quantum confinement.9 In 2001, thermoelectric superlattice devices of Bi2Te3/Sb2Te3 with remarkably high ZT (∼2.4) caused a surge of interest.10 Materials with such high ZT, however, are restricted to laboratory devices, which has prevented their success in practice.11 At present, the main achievement of nanostructuring is reduction of the lattice thermal conductivity12,13 rather than improvements due to quantum confinement of charge carriers.14,15

There is therefore a need to introduce mechanisms that, in addition to reducing κ, also enhance the thermoelectric power factor (S2σ). One innovative approach is to consider theoretically what band structure a hypothetical material should have to maximize ZT. Mahan and Sofo16 predicted this in the 1990s, and others have more recently refined the picture.17 For a given κl, the ideal transport-distribution function that maximizes ZT is a bounded delta function, approximately realized in practice as a sharp function with a large slope in the density of states (DOS) at the Fermi level EF.9,15 These approaches are the base for modern strategies for the development of thermoelectrics: band-structure optimization to emulate the ideal band structure, combined with nanostructural design to reduce the thermal conductivity.

III. The early transition-metal nitrides

A. Overall trends

The early transition-metal nitrides – and their alloys – based on group-4 (Ti, Zr, and Hf) or group-5 (V, Nb, and Ta) metals, are long-established in applications as hard, wear-resistant coatings, with TiN being the archetype. While they are hard and exhibit other typical ceramic properties, these nitrides are metallic in nature with respect to electrical properties and in fact very good conductors, with typical resistivities in the approximate range 10–30 μΩcm (in comparison, noble metals have resistivities of a few μΩcm, and Ti metal about 40 μΩcm).18 Thus, they find extensive use as conducting permanent contact layers and diffusion barriers in microelectronics.

Reducing the valency by one from Ti or increasing it by one from V, i.e., moving to groups 3 or 6 in the periodic table, results in drastically altered properties. The cubic rock-salt-structured ScN and CrN are both narrow-bandgap semiconductors. Sc has three valence electrons that together with the three 2p valence electrons of N complete the filling of the bonding states formed by nearest neighbor hybridization of mainly N 2p and Sc 3d eg with some Sc 4s character. The 3d t2g-orbitals, on the other hand, are completely empty, in contrast to the group-4 and -5 transition metals, and the Fermi level drops below the conduction band edge, causing ScN to become semiconducting. In CrN, with three more electrons than ScN, the non-bonding Cr 3d t2g-band is half-filled. This causes a spin splitting of the band which give Cr atoms of CrN a distinct local magnetic moment approaching 3 μB.19 As a consequence, also in this material, the Fermi level falls into a bandgap, this time between occupied spin-up non-bonding Cr 3d t2g and an unoccupied mixture of mostly anti-bonding spin-up Cr 3d eg, and non-bonding spin-down Cr 3d t2g.20,21

The effect on resistivity is illustrated in Fig. 1, from an early study by Gall et al.22 who investigated TixSc1−xN epitaxial thin films. Pure TiN is a good conductor and exhibits a typical room-temperature resistivity value around 20 μΩcm, and the archetypical metallic temperature dependence with constant resistivity at low temperature dominated by scattering from vacancies, defects, and impurities. As temperature increases, the resistivity increases linearly with the scattering dominated by electron–phonon coupling. For low Sc content in the TixSc1−xN alloy, this behavior is initially retained, but for higher Sc content, an increase in resistivity is observed at cryogenic temperature and for pure ScN this effect is dominant indicating semiconducting behavior. It needs to be stressed, though, that this is highly dependent on impurities and dopants.


image file: c5tc03891j-f1.tif
Fig. 1 Electrical properties of ScN, TiN, and ScTiN alloys. From Gall et al.22 (Copyright American Institute of Physics, used with permission).

B. ScN

ScN, like the group-4 and group-5 transition-metal nitrides, is an interstitial (cubic NaCl structure) nitride following Hägg's rule; that interstitial nitrides and carbides are formed when the radii ratio between the nonmetal and metal atoms is smaller than 0.59.23 ScN has similar hardness as the other transition-metal nitrides, 21 GPa, and is stable at high temperature (melting point 2550 °C), while it is prone to oxidation if used in air above 600 °C.24–26

As stated above, ScN is a narrow-bandgap semiconductor. The fundamental bandgap is ∼0.9 eV and the direct (optical bandgap) is ∼2.1 eV. This was, however, a topic of debate for a rather long time with numerous studies yielding conflicting results as to whether ScN was a semiconductor, a semimetal or even a metal.27–30 The reason for these discrepancies are that it is challenging to produce pure ScN. Sc has a high affinity to oxygen31 and, if not synthesized in a pure ultrahigh-vacuum environment, can readily contain large amounts of oxygen impurities, as well as contaminations from residual hydrocarbons. Free carriers from impurities can result in large inaccuracies in determinations of optical bandgaps.30 Furthermore, processing of scandium ore involves a purification step with fluoride reduction,32 which results in scandium raw materials often containing fluorine impurities.

There are relatively many studies on thin-film growth of ScN. Among the methods used, magnetron sputter deposition,2,22,30,33–35 chemical vapor deposition24,36 and molecular beam epitaxy37–42 are the most common. Irrespective of method, the aspects of reactivity and oxygen and/or fluorine uptake (or other impurities) are essential in thin-film growth of ScN, stressing the need for a pure environment.

For a transition-metal nitride, ScN exhibit an anomalously high thermoelectric power factor2,3S2σ. S2σ is in the range 2.5–3.3 W m−1 K−2, well on par with established thermoelectric materials such as PbTe.43 This is illustrated in Fig. 2, where ScN (our data from ref. 2 and the results of Burmistrova et al.3) are shown in relation to a typical value for n-type PbTe. In comparison, the power factor of Bi2Te3 is somewhat higher at above 4 W m−1 K−2. The thermal conductivity of ScN, though, is much higher than for these tellurides, in the range 8–12 W m−1 K−1,3,24,44 and would need to be drastically reduced to enable application of ScN as a thermoelectric material; strategies for addressing this are discussed in Section V below. These tellurides are benchmark thermoelectric materials. Nonetheless, the scarcity45 of Te as well as legislative restrictions on the use of Pb limits their applicability outside niche applications. Hence, much effort is devoted to developing alternative materials. The early transition-metal nitrides are a class that was not much considered for this purpose until just a few years ago. From an application point-of-view, CrN-based materials are closer to application than ScN-based ones, since the former are abundant, relatively inexpensive and can readily be made in large quantities by standard processing techniques both in thin films and bulk.


image file: c5tc03891j-f2.tif
Fig. 2 Thermoelectric power factor S2σ of ScN (the bottom curve shows our first data from ref. 2 and the top curve are the data of Burmistrova et al.).3 The example data for PbTe are adapted from Sootsman et al.43

The unexpectedly high thermoelectric power factor of ScN can be explained based on band-structure features caused by impurities. A conceptual illustrative example is shown in Fig. 3 (adapted from ref. 46), where first-principles calculations show that the combination of (in this example) C dopants and N vacancies in ScN introduces a sharp variation in the density of states at the Fermi level. As described in Section II, to maximize ZT, the transport-distribution function should be a bounded delta function (for a given phonon κ), realized in practice as a large slope in the density of states near the Fermi level. Thus, the electronic structure of ScN – including vacancies and impurities n the level of ∼1 at% – can mimic the ideal theoretical transport-distribution function, yielding a high power factor.46,47 The same conclusions are drawn from calculations with O or F dopants.3,46


image file: c5tc03891j-f3.tif
Fig. 3 Example of effects of vacancies and dopants on the band structure of ScN (adapted from ref. 46). Bottom: Pure, stoichiometric ScN (note the inaccurate bandgap determination with GGA). Second from bottom: 1% N vacancies. Second from top: 1% C dopants. Top: Both C dopants and N vacancies.

C. CrN

CrN is well known from applications as hard coatings, given its high hardness of 28 GPa and good resistance to wear and corrosion.48–58 It can also be readily synthesized in bulk.59,60 In addition to these properties, CrN exhibits a magnetic phase transition.19,61,62 Above the Néel temperature (TN) of 286 K, CrN is paramagnetic with cubic (NaCl) crystal structure with a lattice parameter reported to range from 4.135 to 4.185 Å.63–66 Below this temperature, the structure is antiferromagnetic and orthorhombic.

The electrical properties of CrN can vary greatly; for example, various studies show resistivity values ranging from 1.7 to 350 mΩcm.4,55,60,67 As for the reported temperature-dependent behavior of the electrical resistivity around the cubic-to-orthorhombic phase transition,68 there is typically a jump in resistivity between these two semiconducting phases, though there are reports of metallic behavior for the orthorhombic phase.69 Part of this apparent discrepancy can be attributed to CrN being a narrow-bandgap semiconductor, where the presence of N vacancies may act as effective dopants yielding high electron concentrations and metallic-like behavior below the Néel temperature.70 In epitaxial thin films, it is possible to stabilize the cubic phase and suppress the phase transition to the orthorhombic phase71–73 In addition, Gall et al.72 suggested that the conducting behavior in CrN films is a hopping conduction mechanism, and the band gap of CrN depends on the correlation energy.

For thermoelectric properties, CrN exhibits high Seebeck coefficients of typically around 135 μV K−1 around room temperature and up to 200 μV K−1 at 600 K.60 Also, its thermal conductivity is moderate at ∼1.7 W m−1 K−1 (∼1/5 of that of ScN). Nonetheless, the electrical resistivity is relatively high; in pure form, because the localized 3d orbitals of Cr give large effective masses causing high Seebeck coefficients and resistivities. This was recently addressed by Quintela et al.5 who annealed as-deposited films in ammonia gas for 2 h at 800 °C to ensure that the films were fully stoichiometric and to improve the crystalline quality; yielding a large improvement in Seebeck coefficient and a hundredfold reduction in resistivity.

This further underscores that the early transition-metal nitrides hold unexpected promise as novel thermoelectric materials. However, in their pure form, neither ScN nor CrN are likely to reach all the way; experimental strategies and theoretically guided design approaches for reduction of the thermal conductivity with retained or increased power factors are needed.

IV. Theoretical methodology

Electronic structure calculations based on density functional theory (DFT)74,75 and standard approximations for the exchange–correlation energies like the local density approximation (LDA) and the different flavors of the generalized gradient approximation (GGA)76 are very efficient and most often accurate tools for phase stability and ground state related properties for most classes of materials. However, both the existing cases where this framework is insufficient in treatment of the quantum electronic problem, and perhaps more frequently, the neglect in theoretical studies of relevant vibrational, magnetic, and structural disorder, present in reality, is an obstacle in first-principles based calculations for real-world materials science problems. In fact, the early 3d transition metal nitrides constitute an interesting illustration of several of these challenges. In ScN, calculations of the bandgap using the Kohn–Sham orbital gap in GGA gives basically a zero-gap semiconductor, an underestimation effect well known and found for practically all semi-conductors. This is seen in the bottom curve in Fig. 2, from ref. 46. In VN, the rock-salt structure observed at room temperature and above is actually dynamically stabilized by anharmonic lattice vibrations and unstable at low temperature.77 This can lead to unphysical large atomic relaxation effects in VN-based systems if static, 0 K, calculations are performed without symmetry constraints, e.g., with point defects or alloys. Finally, in CrN, the effect of strong electron correlation is treatable on the level of LDA+U.70,78,79 However, most importantly the magnetic degree of freedom has caused considerable debate. In particular, the bulk modulus of paramagnetic rock-salt phase of CrN has been modeled using non-spin polarized calculations.80 However, the existence of local finite Cr moments, also above the magnetic ordering temperature, is crucial to consider in the theoretical modeling,81 otherwise the bulk modulus is greatly overestimated. This model, including local Cr moments in the paramagnetic phase, were later independently confirmed by new sets of experiments.82 The simultaneous presence of lattice vibrations and disordered magnetic moments in paramagnetic rock salt CrN causes further challenges for quantitative modeling. In fact, due to this complexity, the material has become a benchmark case for theoretical method development in the field.83–86 A similar finding of the importance of magnetism was also made for the bulk modulus of Cr2AlC and other Cr-containing so-called MAX phases.87 The crucial importance of the details of the nitrogen content and oxygen contamination levels pointed out in the previous section, also causes concern for the theoretical modeling of CrN as it couples with the vibrational and magnetic degrees of freedom.88

The current outstanding issue in this line of theoretical development, is associated with the unclear, material-specific, timescale for the propagation of the magnetic state as compared to the dynamics of the lattice. Recently, several methodological obstacles have been overcome, and methods for constrained local moments calculations89 and the derivation of Heisenberg-type exchange interactions,90 within the supercell based plane-wave electronic structure frameworks needed for ab initio molecular dynamics now exist. The stage is set for a direct combinations of molecular and spin dynamics in an effective ab initio manner with minimum or no free parameters. It would open up for first principles based calculations of lattice and magnetic thermal conductivity in the paramagnetic phase of magnetic materials, such as CrN.

In the case of first-principles modeling of substitutionally disordered nitride alloys, e.g., Cr1−xAlxN and Ti1−xAlxN,91 the configurational problem arise as the crystallographic unit cell is no longer sufficient to describe the material. In a completely random alloy, the components are stochastically distributed on the lattice sites, metal sublattice in the case of a nitride alloy, implying lack of long range order and existence of many different local chemical environments of the atoms. The most reliable method to model such materials is the special quasirandom structure (SQS) method92 introduced for transition metal nitride alloys in a study of Ti1−xAlxN.93 Using the SQS approach the mixing thermodynamics of the alloys can be directly modeled within a mean-field approximation for the configurational entropy. Also, e.g., the piezoelectric properties can be calculated directly.94,95 For the alloys of transition metal nitrides, and group-13 nitrides like AlN, such modeling has revealed important information about the mixing trends, i.e., if the supersaturated alloys obtained in the out-of-equilibrium synthesis at low temperature, will phase separate, order, or stay as a solid solutions when subject to the temperatures needed to induce metal-sublattice diffusion, e.g., in several (Sc,M)N96 and (Cr,M)N97 alloys.

It should be noted that real alloys under equilibrium conditions always display some degree of partial short-range ordering or, short-range clustering. This can of course also be the case for a metastable supersaturated solid solution grown with out-of-equilibrium techniques. However, in lack of a priori knowledge of such tendencies, the ideal random SQS approach is a well-defined, unbiased starting point for e.g. more intricate cluster-expansion approaches of the configurational thermodynamics.98 Outstanding issues here include the difficulty to include vibrational free energy, and in particular anharmonic contributions, into the configurational thermodynamics analysis in an accurate and efficient manner.99

With a reliable state-of-the art theoretical description of the materials equilibrium properties, the door opens for accurate calculations of properties. However, such calculations involves drastically different levels of complexity depending on which property that is needed. The properties needed for predicting the piezoelectric response of a material are second-order strain-derivatives of ground state energies, elastic constants, and first-order strain-derivatives of polarization.100 These are relatively straightforward to calculate accurately from first-principles with the complexities arising mostly from their tensorial nature, where care must be taken in the case of disordered alloys.101

The properties needed for understanding thermoelectric behavior of a material, on the other hand, are quite challenging to derive directly and accurately from first-principles, because the thermoelectric figure of merit includes both electronic and thermal transport and the entropy involves non-equilibrium transport processes. Ab initio calculation of thermoelectric parameters is addressed by Boltzmann transport theory,16,102 but involves an unknown scattering parameter, the relaxation time τ. For the Seebeck coefficient (and Hall coefficient), τ cancels out if it is isotropic and constant with respect to energy. However, electrical and (electronic) thermal conductivities can only be determined either as a function of τ or by fitting to experimentally determined values103 of τ, placing a substantial limitation on these computational approaches. Such calculations of the latter parameters are therefore not truly ab initio but restricted to materials for which experimental data of τ (or parameters from which τ can be calculated) are available. Ongoing method development is therefore devoted to finding methods for computing these from first principles. Examples are the recent work of Faghaninia et al.104 who derived an ab initio approach for computing these properties in the low-electric-field limit, and efforts to incorporate low-temperature effect of phonon drag.105,106

V. Ternary systems

As proposed above, ScN and CrN are promising for thermoelectrics and based on cheap raw materials, while a reduced thermal conductivity of ScN or reduced electrical resistivity of CrN would be required for actual applications. This can be addressed in a Cr1−xScxN solid solution, which is thermodynamically stable at high temperature in cubic NaCl-structured form.107 The fact that the 3d orbitals in Sc are empty can be exploited as a means of delocalizing the electrons in 3d orbitals, resulting in electrical conductivity reduction107 and possibly also thermal-conductivity reduction due to alloy scattering. We have recently shown that the Seebeck coefficient of Sc-rich Cr1−xScxN solid solution epitaxial thin films does indeed increase compared to pure ScN and that the thermoelectric properties of CrN are largely retained in Cr-rich Cr1−xScxN solid solutions.107

ScN-based solid solutions are further important, because of the interest caused by the exceptionally high piezoelectric coupling coefficient in (Sc,Al)N alloys.1,108 (Sc,Al)N and (Sc,Ga)N alloys were recently reviewed by Moram and Zhang109 and the reader is referred there. (Sc,Mn)N was investigated by Saha et al.110

Alloy scattering is one of the standard strategies for thermoelectric materials for reduction of the lattice thermal conductivity; other approaches are superlattices, nanoinclusions, or grain boundaries.6,111–114 Furthermore, the peaks in the density of states at the Fermi level causing high Seebeck coefficient is traditionally associated with reduced thermodynamic stability.115,116 For this reason, the search for optimal thermoelectric materials may be fruitful among metastable materials synthesized with far-from-equilibrium techniques, such as magnetron-sputtered metastable nitride thin film alloys, with the reservation that the metastable nature of such materials would place a limit on high-temperature long-term use.

ScN- and CrN-based systems are interesting model systems for these general research questions.96 In particular, Sc is naturally isotope-pure, thus lacking isotope reduction of thermal conductivity. Consequently, the possibilities to substantially reduce the thermal conductivity by alloying or nanostructural engineering are particularly promising in this material. If the thermal conductivity can be reduced, ScN-based materials could potentially be applied at elevated temperatures, where bulk diffusion can be activated and the thermodynamics of mixing between ScN and the alloying or superlattice component becomes relevant. Superlattices might intermix, alloys could order or phase-separate, and nanostructures might be dissolved in the matrix. All these processes will most likely affect thermoelectric properties.

Superlattices are of great interest for thermoelectrics, since they may allow for both the reduction of the lattice thermal conductivity and the quantum confinement of electrons. The first thermoelectric superlattice devices were made from combinations of the semiconductors Bi2Te3/Sb2Te3.117 A different approach is to combine the high electron concentrations of ultrathin metallic layers (e.g., TiN or ZrN) inserted between semiconductor barriers (e.g., CrN, ScN), the sharp asymmetry in the conduction electron distribution near the Fermi energy may be achieved for possible substantial improvements in ZT.118 Furthermore, it has been demonstrated that the high interface density in a superlattice can reduce the thermal conductivity in ScN/(Zr,W)N superlattices.44 This is illustrated in Fig. 4, from Rawat et al.44


image file: c5tc03891j-f4.tif
Fig. 4 Illustration of superlattice reduction in thermal conductivity, from Rawat et al.44 Cross-plane thermal conductivity of 300 nm thick ZrN/ScN (dots) and Zr0.64W0.36N/ScN (squares) multilayers. Superimposed on the plot are horizontal lines corresponding to the experimentally determined lattice component of thermal conductivity, i.e., the alloy limit of different alloys of ZrN, ScN, and W2N. (Copyright American Institute of Physics, used with permission).

A theoretically guided approach to implementing these strategies are to use density functional theory calculations to investigate the effect of mixing thermodynamics in order to determine phase stability of ScN-based solid solutions of relevance for lattice thermal conductivity reduction. Our results demonstrated96 that at 800 °C the free energy of mixing for (Sc,Y)N, (Sc,La)N, (Sc,Gd)N, and (Sc,In)N exhibits a thermodynamic tendency for phase separation at high temperature. In addition, for the 50[thin space (1/6-em)]:[thin space (1/6-em)]50 Sc[thin space (1/6-em)]:[thin space (1/6-em)]M (M = V, Nb, or Ta) ratio, the (Sc,V)N, (Sc,Nb)N, and (Sc,Ta)N exhibit a stable ternary inherently nanolaminated phase119 with the ScTaN2-type structure. On the other hand, at 800 °C, the (Sc,Ti)N, (Sc,Zr)N, (Sc,Hf)N, and (Sc,Lu)N are thermodynamically stable in disordered B1 (NaCl) solid solutions, rather than in the ordered solid solutions which are stable at 0 K. This last point is shown in Fig. 5 (from ref. 96), which shows (Fig. 5(a)) a comparison of the calculated mixing enthalpies of substitutionally disordered solid solution, ordered solid solutions and ScTaN2-type structure phase of (Sc,M)N, as a function of MN content where M = Ti, Zr, and Hf, and (Fig. 5(b)) calculated equilibrium lattice parameter for the rocksalt (B1) solid solution as a function of MN content.


image file: c5tc03891j-f5.tif
Fig. 5 (a) Comparison of the calculated mixing enthalpies of substitutionally disordered solid solution, ordered solid solutions and ScTaN2-type structure phase of Sc1−xMxN, as a function of MN content where M = Ti, Zr, and Hf, respectively. (b) Calculated equilibrium lattice parameter for rocksalt (B1) Sc1−xMxN solid solution as a function of MN content where M = Ti, Zr, and Hf, respectively. The black line indicates Vegard's rule. For (Sc,Ti)N, experimental data from Gall et al.22 are shown with stars. From ref. 96 (Copyright American Institute of Physics, used with permission).

These results enabled us to suggest suitable materials for the different possible strategies for reduction of the lattice thermal conductivity of ScN. Since the heavy element Lu has a mixing tendency with ScN and has the same number of valence electrons, it is an appropriate choice for solid-solution reduction of the thermal conductivity. YN, LaN, GdN, AlN, GaN, InN, have a thermodynamic tendency for phase separation with ScN and thus constitute good alloying elements if decomposition to form nanoinclusions is the strategy. The three former can be used for superlattices, since they in addition are isostructural with ScN. That, in combination with the thermodynamic tendency for phase separation, would render the superlattice structure stable. The wurtzite AlN, GaN, and InN are not suited for this purpose because of the difference in crystal structure, but their alloys with ScN or other NaCl-structure nitrides can be, as described below.120–122 The mixing thermodynamics of these alloy systems can be understood by considering the effect of the factors of volume mismatch, favoring phase separation, and an electronic structure effect of delocalization of extra d-electrons to empty Sc 3d-t2g states, favoring mixing.

Important experimental demonstrations of these principles are the works of Saha et al. who stabilized cubic (Sc,Al)N lattice-matched121 to TiN and (Ti,W)N in TiN/(Sc,Al)N and (Ti,W)N/(Sc,Al)N superlattices exhibiting enhanced hardness122 and large reduction in thermal conductivity.123 Here, the combination of superlattice scattering and heavy-element alloying (with W) allowed for thermal conductivities down to 1.7 W m−1 K−1 (compared to 8–10 W m−1 K−1 for pure ScN). Nonetheless, as discussed above, these superlattice structures are metastable and limited in use to the medium-temperature range. Around 800 °C, where bulk diffusion becomes dominant, their long-term thermal stability would be compromised due to intermixing. This was demonstrated by Schreoder et al. who showed that TiN/(Sc,Al)N superlattices intermix heavily at elevated temperature.120

Finally, we note that recently theoretical calculations has been used to suggest further alternatives to the ScN and CrN based semiconducting systems. In particular, by combining group-4 transition metals with a group-2 alkaline-earth metal in equal amounts, novel semiconducting systems have been predicted, like Ti0.5Mg0.5N124 and the wurtzite-structure (TM0.5,M0.5)xAl1−xN alloys are investigated for piezoelectric properties.125,126 These recent studies demonstrate the superior speed with which computationally based approaches can scan large pools of complex, uncharted materials and suggest candidates for a given property, before experimental verification is pursued. This emphasizes the promise for a future of theoretically driven materials discoveries, at least in the cases where the theoretical accuracy and methodological reliability is well established.

VI. Concluding remarks

We have reviewed the present state of research on early transition-metal nitrides, primarily based on ScN and CrN, for thermoelectric energy harvesting. These materials also constitute well-defined model systems for theory-guided approaches investigating thermodynamics of mixing for alloying and nanostructural design for optimization of phase stability and band structure, in order to improve thermoelectric properties. This is most notable as thermoelectric properties per se – unlike piezoelectric properties – are challenging to reliably calculate by ab initio methods. This can be used to guide the implementation of strategies for reduction of the lattice thermal conductivity; alloy scattering, superlattices, and nanoinclusions.

Acknowledgements

The authors acknowledge funding from the European Research Council under the European Community's Seventh Framework Programme (FP/2007-2013)/ERC grant agreement no. 335383, the Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linköping University (Faculty Grant SFO-Mat-LiU No. 2009 00971), the Swedish Foundation for Strategic Research (SSF) through the Future Research Leaders 5 program, and the Swedish Research Council (VR) under project no. 621-2012-4430, project no. 621-2011-4417, and International Career Grant 330-2014-6336.

References

  1. M. Akiyama, T. Kamohara, K. Kano, A. Teshigahara, Y. Takeuchi and N. Kawahara, Adv. Mater., 2009, 21, 593 CrossRef CAS PubMed .
  2. S. Kerdsongpanya, N. Van Nong, N. Pryds, A. Zukauskaite, J. Jensen, J. Birch, J. Lu, L. Hultman, G. Wingqvist and P. Eklund, Appl. Phys. Lett., 2011, 99, 232113 CrossRef .
  3. P. V. Burmistrova, J. Maassen, T. Favaloro, B. Saha, S. Salamat, Y. R. Koh, M. S. Lundstrom, A. Shakouri and T. D. Sands, J. Appl. Phys., 2013, 113, 153704 CrossRef .
  4. C. X. Quintela, B. Rodriguez-González and F. Rivadulla, Appl. Phys. Lett., 2014, 104, 022103 CrossRef .
  5. C. X. Quintela, J. P. Podkaminer, M. N. Luckyanova, T. R. Paudel, E. L. Thies, D. A. Hillsberry, D. A. Tenne, E. Y. Tsymbal, G. Chen, C.-B. Eom and F. Rivadulla, Adv. Mater., 2015, 27, 3032 CrossRef CAS PubMed .
  6. G. J. Snyder and E. S. Toberer, Nat. Mater., 2008, 7, 105 CrossRef CAS PubMed .
  7. C. J. Vineis, A. Shakouri, A. Majumdar and M. G. Kanatzidis, Adv. Mater., 2010, 22, 3970 CrossRef CAS PubMed .
  8. J. R. Sootsman, D. Y. Chung and M. G. Kanatzidis, Angew. Chem., Int. Ed., 2009, 48, 8616 CrossRef CAS PubMed .
  9. L. D. Hicks and M. S. Dresselhaus, Phys. Rev. B: Condens. Matter Mater. Phys., 1993, 47, 12727 CrossRef CAS .
  10. R. Venkatasubramanian, E. Siivola, T. Colpitts and B. O'Quinn, Nature, 2001, 413, 597 CrossRef CAS PubMed .
  11. C. B. Vining, Nat. Mater., 2009, 8, 83 CrossRef CAS PubMed .
  12. H. Liu, X. Shi, F. Xu, L. Zhang, W. Zhang, L. Chen, Q. Li, C. Uher, T. Day and G. J. Snyder, Nat. Mater., 2012, 11, 422 CrossRef CAS PubMed .
  13. R. J. Mehta, Y. Zheng, C. Karthik, B. Singh, R. W. Siegel, T. Borca-Tasciuc and G. Ramanath, Nat. Mater., 2012, 11, 233 CrossRef CAS PubMed .
  14. C. J. Vineis, A. Shakouri, A. Majumdar and M. G. Kanatzidis, Adv. Mater., 2010, 22, 3970 CrossRef CAS PubMed .
  15. J. R. Sootsman, D. Y. Chung and M. G. Kanatzidis, Angew. Chem., Int. Ed., 2009, 48, 8616 CrossRef CAS PubMed .
  16. G. D. Mahan and J. O. Sofo, Proc. Natl. Acad. Sci. U. S. A., 1996, 93, 7436 CrossRef CAS .
  17. Z. Y. Fan, H. Q. Wang and J.-C. Zheng, J. Appl. Phys., 2011, 109, 073713 CrossRef .
  18. R. S. Ningthoujam and N. S. Gajbhiye, Prog. Mater. Sci., 2015, 70, 50 CrossRef CAS .
  19. L. M. Corliss, N. Elliott and J. M. Hastings, Phys. Rev., 1960, 117, 929 CrossRef CAS .
  20. A. Herwadkar and W. R. L. Lambrecht, Phys. Rev. B: Condens. Matter Mater. Phys., 2009, 79, 035125 CrossRef .
  21. B. Alling, Phys. Rev. B: Condens. Matter Mater. Phys., 2010, 82, 054408 CrossRef .
  22. D. Gall, I. Petrov and J. E. Greene, J. Appl. Phys., 2001, 89, 401 CrossRef CAS .
  23. L. E. Toth, Transition Metal Carbides and Nitrides, Academic Press, New York, 1971 Search PubMed .
  24. S. W. King, R. F. Davis and R. J. Nemanich, J. Vac. Sci. Technol., A, 2014, 32, 061504 Search PubMed .
  25. J. P. Dismukes, W. M. Yim, J. J. Tietjen and R. E. Novak, J. Cryst. Growth, 1971, 9, 295 CrossRef .
  26. J. P. Dismukes, W. M. Yim, J. J. Tietjen and R. E. Novak, R.C.A. Review, 1970, 31, 680 CAS .
  27. G. Travaglini, F. Marabelli, R. Monnier, E. Kaldis and P. Wachter, Phys. Rev. B: Condens. Matter Mater. Phys., 1986, 34, 3876 CrossRef CAS .
  28. W. R. L. Lambrecht, Phys. Rev. B: Condens. Matter Mater. Phys., 2000, 62, 13538 CrossRef CAS .
  29. C. Stampfl, W. Mannstadt, R. Asahi and A. J. Freeman, Phys. Rev. B: Condens. Matter Mater. Phys., 2001, 63, 155106 CrossRef .
  30. D. Gall, M. Städele, K. Järrendahl, I. Petrov, P. Desjardins, R. T. Haasch, T. Y. Lee and J. E. Greene, Phys. Rev. B: Condens. Matter Mater. Phys., 2001, 63, 125119 CrossRef .
  31. M. A. Moram, Z. H. Barber and C. J. Humphreys, Thin Solid Films, 2008, 516, 8569 CrossRef CAS .
  32. R. Deng, B. D. Ozsdolay, P. Y. Zheng, S. V. Khare and D. Gall, Phys. Rev. B: Condens. Matter Mater. Phys., 2015, 91, 045104 CrossRef .
  33. D. Gall, I. Petrov, N. Hellgren, L. Hultman, J. E. Sundgren and J. E. Greene, J. Appl. Phys., 1998, 84, 6034 CrossRef CAS .
  34. D. Gall, I. Petrov, P. Desjardins and J. E. Greene, J. Appl. Phys., 1999, 86, 5524 CrossRef CAS .
  35. J. M. Gregoire, S. D. Kirby, G. E. Scopelianos, F. H. Lee and R. B. van Dover, J. Appl. Phys., 2008, 104, 074913 CrossRef .
  36. Y. Oshima, G. E. Villora and K. Shimamura, J. Appl. Phys., 2014, 115, 153508 CrossRef .
  37. H. A. Al-Brithen, A. R. Smith and D. Gall, Phys. Rev. B: Condens. Matter Mater. Phys., 2004, 70, 045303 CrossRef .
  38. T. D. Moustakas, R. J. Molnar and J. P. Dismukes, Proc. – Electrochem. Soc., 1996, 96(11), 197 Search PubMed .
  39. H. A. H. Al-Brithen, E. M. Trifan, D. C. Ingram, A. R. Smith and D. Gall, J. Cryst. Growth, 2002, 242, 345 CrossRef CAS .
  40. H. Al-Brithen and A. R. Smith, Appl. Phys. Lett., 2000, 77, 2485 CrossRef CAS .
  41. M. A. Moram, T. B. Joyce, P. R. Chalker, Z. H. Barber and C. J. Humphreys, Appl. Surf. Sci., 2006, 252, 8385 CrossRef CAS .
  42. M. A. Moram, S. V. Novikov, A. J. Kent, C. Norenberg, C. T. Foxon and C. J. Humphreys, J. Cryst. Growth, 2008, 310, 2746 CrossRef CAS .
  43. J. R. Sootsman, et al. , Angew. Chem., Int. Ed., 2008, 47, 8618 CrossRef CAS PubMed .
  44. V. Rawat, Y. K. Koh, D. G. Cahill and T. D. Sands, J. Appl. Phys., 2009, 105, 024909 CrossRef .
  45. R. Amatya and R. J. Ram, J. Electron. Mater., 2012, 41, 1011 CrossRef CAS .
  46. S. Kerdsongpanya, B. Alling and P. Eklund, Phys. Rev. B: Condens. Matter Mater. Phys., 2012, 86, 195140 CrossRef .
  47. M. G. Moreno-Armenta and G. Soto, Comput. Mater. Sci., 2007, 40, 275 CrossRef CAS .
  48. H. C. Barshilia, N. Selvakumar, B. Deepthi and K. S. Rajam, Surf. Coat. Technol., 2006, 201, 2193 CrossRef CAS .
  49. G. G. Fuentes, R. Rodriguez, J. C. Avelar-Batista, J. Housden, F. Montalá, L. J. Carreras, A. B. Cristóbal, J. J. Damborenea and T. J. Tate, J. Mater. Process. Technol., 2005, 167, 415 CrossRef CAS .
  50. M. L. Kuruppu, G. Negrea, I. P. Ivanov and S. L. Rohde, J. Vac. Sci. Technol., A, 1998, 16, 1949 CAS .
  51. T. Polcar, T. Kubart, R. Novák, L. Kopecký and P. Široký, Surf. Coat. Technol., 2005, 193, 192 CrossRef CAS .
  52. T. Polcar, N. M. G. Parreira and R. Novák, Surf. Coat. Technol., 2007, 201, 5228 CrossRef CAS .
  53. J. Lin, W. D. Sproul and J. J. Moore, Mater. Lett., 2012, 89, 55 CrossRef CAS .
  54. J. Lin, W. D. Sproul and J. J. Moore, Surf. Coat. Technol., 2012, 206, 2474 CrossRef CAS .
  55. D. Gall, C.-S. Shin, T. Spila, M. Odén, M. J. H. Senna, J. E. Greene and I. Petrov, J. Appl. Phys., 2002, 91, 3589 CrossRef CAS .
  56. C. Petrogalli, L. Montesano, M. Gelfi, G. M. La Vecchia and L. Solazzi, Surf. Coat. Technol., 2014, 258, 878 CrossRef CAS .
  57. J. Lin, N. Zhang, W. D. Sproul and J. J. Moore, Surf. Coat. Technol., 2012, 206, 3283 CrossRef CAS .
  58. N. Beliardouh, K. Bouzid, C. Nouveau, B. Tlili and M. Walock, Tribol. Int., 2015, 82, 443 CrossRef CAS .
  59. P. S. Herle, M. Hegde, N. Vasathacharya, S. Philip, M. R. Rao and T. Sripathi, J. Solid State Chem., 1997, 134, 120 CrossRef .
  60. O. Jankovský, D. Sedmidubský, Š. Huber, P. Šimek and Z. Sofer, J. Eur. Ceram. Soc., 2014, 34, 4131 CrossRef .
  61. A. Filippetti, W. E. Pickett and B. M. Klein, Phys. Rev. B: Condens. Matter Mater. Phys., 1999, 59, 7043 CrossRef CAS .
  62. A. Filippetti and N. A. Hill, Phys. Rev. Lett., 2000, 85, 5166 CrossRef CAS PubMed .
  63. C. Constantin, M. B. Haider, D. Ingram and A. R. Smith, Appl. Phys. Lett., 2004, 85, 6371 CrossRef CAS .
  64. P. Hones, M. Diserens, R. Sanjinés and F. Lévy, J. Vac. Sci. Technol., B: Microelectron. Nanometer Struct.–Process., Meas., Phenom., 2000, 18, 2851 CrossRef CAS .
  65. K. Inumaru, K. Koyama, N. Imo-oka and S. Yamanaka, Phys. Rev. B: Condens. Matter Mater. Phys., 2007, 75, 054416 CrossRef .
  66. X. Y. Zhang, J. S. Chawla, B. M. Howe and D. Gall, Phys. Rev. B: Condens. Matter Mater. Phys., 2011, 83, 165205 CrossRef .
  67. C. X. Quintela, F. Rivadulla and J. Rivas, Appl. Phys. Lett., 2009, 94, 152103 CrossRef .
  68. P. S. Herle, M. Hegde, N. Vasathacharya, S. Philip, M. R. Rao and T. Sripathi, J. Solid State Chem., 1997, 134, 120 CrossRef .
  69. C. Constantin, M. B. Haider and D. Ingram andn A. R. Smith, Appl. Phys. Lett., 2004, 85, 6371 CrossRef CAS .
  70. A. Herwadkar and W. R. L. Lambrecht, Phys. Rev. B: Condens. Matter Mater. Phys., 2009, 79, 035125 CrossRef .
  71. X. Y. Zhang, J. S. Chawla, R. P. Deng and D. Gall, Phys. Rev. B: Condens. Matter Mater. Phys., 2011, 84, 073101 CrossRef .
  72. D. Gall, C.-S. Shin, R. T. Haasch, I. Petrov and J. E. Greene, J. Appl. Phys., 2002, 91, 5882 CrossRef CAS .
  73. K. Inumaru, K. Koyama, N. Imo-oka and S. Yamanaka, Phys. Rev. B: Condens. Matter Mater. Phys., 2007, 75, 054416 CrossRef .
  74. P. Hohenberg and W. Kohn, Phys. Rev., 1964, 136, B864 CrossRef .
  75. W. Kohn and L. J. Sham, Phys. Rev., 1965, 140, A1133 CrossRef .
  76. J. P. Perdew, K. Burke and M. Ernzerhof, Phys. Rev. Lett., 1996, 77, 3865 CrossRef CAS PubMed .
  77. A. Mei, O. Hellman, N. Wireklint, C. M. Schlepütz, D. V. Sangiovanni, B. Alling, A. Rockett, L. Hultman, I. Petrov and J. E. Greene, Phys. Rev. B: Condens. Matter Mater. Phys., 2015, 91, 054101 CrossRef .
  78. A. S. Botana, V. Tran, D. Pardo, D. Baldomir and P. Blaha, Phys. Rev. B: Condens. Matter Mater. Phys., 2012, 85, 235118 CrossRef .
  79. B. Alling, T. Marten and I. A. Abrikosov, Phys. Rev. B: Condens. Matter Mater. Phys., 2010, 82, 184430 CrossRef .
  80. F. Rivadulla, M. Banobre-Lopez, C. X. Quintela, A. Pineiro, V. Pardo, D. Baldomir, M. A. Lopez-Quintela, J. Rivas, C. A. Ramos, H. Salva, J.-S. Zhou and J. B. Goodenough, Nat. Mater., 2009, 8, 947 CrossRef CAS PubMed .
  81. B. Alling, T. Marten and I. A. Abrikosov, Nat. Mater., 2010, 9, 283 CrossRef CAS PubMed .
  82. S. Wang, X. Yu, J. Zhang, M. Chen, J. Zhu, L. Wang, D. He, Z. Lin, R. Zhang, K. Leinenweber and Y. Zhao, Phys. Rev. B: Condens. Matter Mater. Phys., 2012, 86, 064111 CrossRef .
  83. P. Steneteg, B. Alling and I. A. Abrikosov, Phys. Rev. B: Condens. Matter Mater. Phys., 2012, 85, 144404 CrossRef .
  84. B. Alling, L. Hultberg, L. Hultman and I. A. Abrikosov, Appl. Phys. Lett., 2013, 102, 031910 CrossRef .
  85. N. Shulumba, B. Alling, O. Hellman, E. Mozafari, P. Steneteg, M. Odén and I. A. Abrikosov, Phys. Rev. B: Condens. Matter Mater. Phys., 2014, 89, 174108 CrossRef .
  86. L. Zhou, F. Körmann, D. Holec, M. Bartosik, B. Grabowski, J. Neugebauer and P. H. Mayrhofer, Phys. Rev. B: Condens. Matter Mater. Phys., 2014, 90, 184102 CrossRef .
  87. M. Dahlqvist, B. Alling and J. Rosén, J. Appl. Phys., 2013, 113, 216103 CrossRef .
  88. E. Mozafari, B. Alling, P. Steneteg and I. A. Abrikosov, Phys. Rev. B: Condens. Matter Mater. Phys., 2015, 91, 094101 CrossRef .
  89. P.-W. Ma and S. L. Dudarev, Phys. Rev. B: Condens. Matter Mater. Phys., 2015, 91, 054420 CrossRef .
  90. A. Lindmaa, R. Lizarraga, E. Holmström, I. A. Abrikosov and B. Alling, Phys. Rev. B: Condens. Matter Mater. Phys., 2013, 88, 054414 CrossRef .
  91. B. Alling, T. Marten, I. A. Abrikosov and A. Karimi, J. Appl. Phys., 2007, 102, 044314 CrossRef .
  92. A. Zunger, S.-H. Wei, L. G. Ferreira and J. E. Bernard, Phys. Rev. Lett., 1990, 65, 353 CrossRef CAS PubMed .
  93. B. Alling, A. V. Ruban, A. Karimi, O. E. Peil, S. I. Simak, L. Hultman and I. A. Abrikosov, Phys. Rev. B: Condens. Matter Mater. Phys., 2007, 75, 045123 CrossRef .
  94. F. Tasnádi, I. A. Abrikosov and I. Katardjiev, Appl. Phys. Lett., 2009, 94, 151911 CrossRef .
  95. F. Tasnádi, B. Alling, C. Höglund, G. Wingqvist, J. Birch, L. Hultman and I. A. Abrikosov, Phys. Rev. Lett., 2010, 104, 137601 CrossRef PubMed .
  96. S. Kerdsongpanya, B. Alling and P. Eklund, J. Appl. Phys., 2013, 114, 073512 CrossRef .
  97. L. Zhou, D. Holec and P. H. Mayrhofer, J. Phys. D: Appl. Phys., 2013, 46, 365301 CrossRef .
  98. B. Alling, A. V. Ruban, A. Karimi, L. Hultman and I. A. Abrikosov, Phys. Rev. B: Condens. Matter Mater. Phys., 2011, 83, 104203 CrossRef .
  99. N. Shulumba, O. Hellman, Z. Raza, J. Barriero, B. Alling, F. Mücklich, I. A. Abrikosov and M. Odén, 2015, arXiv:1503.02459.
  100. F. Bernandini, V. Fiorentini and D. Vanderbilt, Phys. Rev. B: Condens. Matter Mater. Phys., 1997, 56, R10024 CrossRef .
  101. F. Tasnádi, M. Odén and I. A. Abrikosov, Phys. Rev. B: Condens. Matter Mater. Phys., 2012, 85, 144112 CrossRef .
  102. G. K. H. Madsen and D. J. Singh, Comput. Phys. Commun., 2006, 175, 67 CrossRef CAS .
  103. K. Kutorasiński, J. Tobola and S. Kaprzyk, Phys. Rev. B: Condens. Matter Mater. Phys., 2013, 87, 195205 CrossRef .
  104. A. Faghaninia, J. W. Ager III and C. S. Lo, Phys. Rev. B: Condens. Matter Mater. Phys., 2015, 91, 235123 CrossRef .
  105. B. Qiu, Z. Tian, A. Vallabhaneni, B. Liao, J. M. Mendoza, O. D. Restrepo, X. Ruan and G. Chen, EPL, 2105, 109, 57006 CrossRef .
  106. J. Zhou, B. Liao, B. Qiu, S. Huberman, K. Esfarjani, M. S. Dresselhaus and G. Chen, Proc. Natl. Acad. Sci. U. S. A., 2015, 112, 14777 CrossRef CAS PubMed .
  107. S. Kerdsongpanya, PhD thesis, Linköping studies in science and technology, 2015, ISBN 978-91-7519-067-9 .
  108. M. A Caro, S. Zhang, T. Riekkinen, M. Ylilammi, M. A Moram, O. Lopez-Acevedo, J. Molarius and T. Laurila, J. Phys.: Condens. Matter, 2015, 27, 245901 CrossRef PubMed .
  109. M. A. Moram and S. Zhang, J. Mater. Chem. A, 2014, 2, 6042 CAS .
  110. B. Saha, G. Naik, V. P. Drachev, A. Boltassseva, E. E. Marinero and T. D. Sands, J. Appl. Phys., 2013, 114, 063519 CrossRef .
  111. C. J. Vineis, A. Shakouri, A. Majumdar and M. G. Kanatzidis, Adv. Mater., 2010, 22, 3970 CrossRef CAS PubMed .
  112. A. Shakouri, Annu. Rev. Mater. Res., 2011, 41, 399 CrossRef CAS .
  113. E. S. Toberer, L. L. Baranowski and C. Dames, Annu. Rev. Mater. Res., 2012, 42, 179 CrossRef CAS .
  114. K. Biswas, J. He, Q. Zhang, G. Wang, C. Uher, V. P. Dravid and M. G. Kanatzidis, Nat. Chem., 2011, 3, 160 CrossRef CAS PubMed .
  115. P. Eklund, M. Beckers, U. Jansson, H. Högberg and L. Hultman, Thin Solid Films, 2010, 518, 1851 CrossRef CAS .
  116. G. Hug, Phys. Rev. B: Condens. Matter Mater. Phys., 2006, 74, 184113 CrossRef .
  117. R. Venkatasubramanian, E. Siivola, T. Colpitts and B. O'Quinn, Nature, 2001, 413, 597 CrossRef CAS PubMed .
  118. M. Zebarjadi, Z. Bian, R. Singh, A. Shakouri, R. Wortman, V. Rawat and T. D. Sands, J. Electron. Mater., 2009, 38, 960 CrossRef CAS .
  119. R. Niewa, D. A. Zherebtsov, W. Schnelle and F. R. Wagner, Inorg. Chem., 2004, 43, 6188 CrossRef CAS PubMed .
  120. J. L. Schroeder, B. Saha, M. Garbrecht, N. Schell, T. D. Sands and J. Birch, J. Mater. Sci., 2015, 50, 3200 CAS .
  121. B. Saha, S. Saber, G. V. Naik, A. Boltasseva, E. A. Stach, E. P. Kvam and T. D. Sands, Phys. Status Solidi B, 2015, 252, 251 CrossRef CAS .
  122. B. Saha, S. K. Lawrence, J. L. Schroeder, J. Birch, D. F. Bahr and T. D. Sands, Appl. Phys. Lett., 2014, 105, 151904 CrossRef .
  123. B. Saha, Y. R. Koh, J. Comparan, S. Sadasivam, J. L. Schroeder, M. Garbrecht, A. Mohammed, J. Birch, T. Fisher, A. Shakouri and T. D. Sands, Phys. Rev. B: Condens. Matter Mater. Phys., 2016, 93, 045311 CrossRef .
  124. B. Alling, Phys. Rev. B: Condens. Matter Mater. Phys., 2014, 89, 085112 CrossRef .
  125. C. Tholander, F. Tasnadi, I. A. Abrikosov, L. Hultman, J. Birch and B. Alling, Phys. Rev. B: Condens. Matter Mater. Phys., 2015, 92, 174119 CrossRef .
  126. Y. Iwazaki, T. Yokoyama, T. Nishihara and M. Ueda, Appl. Phys. Express, 2015, 8, 061501 CrossRef .

This journal is © The Royal Society of Chemistry 2016