Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution 3.0 Unported Licence
Correction: Structures, preparation and applications of titanium suboxides
Baoqiang Xua,
Hong Yong Sohn*b,
Yousef Mohassabb and
Yuanpei Lanbc
aState Key Laboratory of Complex Nonferrous Metal Resources Clear Utilization, National Engineering Laboratory for Vacuum Metallurgy, Yunnan Provincial Key Laboratory for Nonferrous Vacuum Metallurgy, Kunming University of Science and Technology, Kunming 650093, P. R. China
bDepartment of Metallurgical Engineering, University of Utah, Salt Lake City, Utah 84112, USA. E-mail: h.y.sohn@utah.edu
cCollege of Material Science & Engineering, Chongqing University, Chongqing 400044, P. R. China
First published on 29th November 2016
Abstract
Correction for ‘Structures, preparation and applications of titanium suboxides’ by Baoqiang Xu et al., RSC Adv., 2016, 6, 79706–79722.
The authors regret that one of the funding bodies listed in the Acknowledgements section of the original article is incorrect. A revised version of the Acknowledgements section, in which ‘the Cultivating Plan Program for the Technological Leading Talents of Yunnan Province’ replaces ‘the Program for Innovative Research Team in Ministry of Science and Technology of China’, can be found below.
The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.
Acknowledgements
This work was supported in part by NSF/U.S.–Egypt Joint Science and Technology Board under Grant No. IIA-1445577, National Science Foundation of China (No. 51464023), National Science Foundation of China (No. 51674129) and the Cultivating Plan Program for the Technological Leading Talents of Yunnan Province (No. 2014HA003). Baoqiang Xu expresses his special gratitude for financial support (No. 201408530020) from China Scholarship Council (CSC) for his stay as a visiting scholar at the University of Utah.| This journal is © The Royal Society of Chemistry 2016 |