Issue 81, 2016

New lignin-based polyurethane foam for wastewater treatment

Abstract

Utilization of renewable feedstock for the development of alternative materials is rapidly increasing due to the depletion of petroleum resources and related environmental issues. Lignin, the second major constituent of lignocellulosic biomass, is catching the attention of researchers for the synthesis of various value-added materials due to its renewable and biodegradable nature, large abundance, non-food value and high functionality. In the present work, lignin was extracted from pine needles, a considerable bio-waste material, and was used as the polyol for the synthesis of polyurethane foam (PUF). The synthesized lignin-PUF (LPUF) was characterized for its physical and thermal properties, and employed as an adsorbent of dyes. The results demonstrated that LPUF is an efficient material to remove a cationic dye, malachite green, and was better in comparison to an anionic dye, methyl orange, from their aqueous solutions. Dye adsorption was a spontaneous and endothermic process. The adsorption kinetics and isotherms fitted well the pseudo second-order model and Langmuir adsorption isotherm, respectively, with a maximum adsorption capacity of 80 mg g−1. In addition, LPUF was reusable for a number of repeat cycles with a cumulative adsorption capacity of 1.33 g g−1 after twenty regeneration cycles.

Graphical abstract: New lignin-based polyurethane foam for wastewater treatment

Supplementary files

Article information

Article type
Paper
Submitted
23 May 2016
Accepted
05 Aug 2016
First published
09 Aug 2016

RSC Adv., 2016,6, 77768-77776

New lignin-based polyurethane foam for wastewater treatment

S. Kumari, G. S. Chauhan, S. Monga, A. Kaushik and J. Ahn, RSC Adv., 2016, 6, 77768 DOI: 10.1039/C6RA13308H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements