Issue 5, 2016

Understanding properties of engineered catalyst supports using contact angle measurements and X-Ray reflectivity

Abstract

There is significant interest in broadening the type of catalyst substrates that support the growth of high-quality carbon nanotube (CNT) carpets. In this study, ion beam bombardment has been utilized to modify catalyst substrates for CNT carpet growth. Using a combination of contact angle measurements (CAMs) and X-ray reflectivity (XRR) for the first time, new correlations between the physicochemical properties of pristine and engineered catalyst substrates and CNT growth behavior have been established. The engineered surfaces obtained after exposure to different degrees of ion beam damage have distinct physicochemical properties (porosity, layer thickness, and acid–base properties). The CAM data were analyzed using the van Oss–Chaudhury–Good model, enabling the determination of the acid–base properties of the substrate surfaces. For the XRR data, a Fourier analysis of the interference patterns enabled extraction of layer thickness, while the atomic density and interfacial roughness were extracted by analyzing the amplitude of the interference oscillations. The dramatic transformation of the substrate from “inactive” to “active” is attributed to a combined effect of substrate porosity or damage depth and Lewis basicity. The results reveal that the efficiency of catalyst substrates can be further improved by increasing the substrate basicity, if the minimum surface porosity is established. This study advances the use of a non-thermochemical approach for catalyst substrate engineering, as well as demonstrates the combined utility of CAM and XRR as a powerful, nondestructive, and reliable tool for rational catalyst design.

Graphical abstract: Understanding properties of engineered catalyst supports using contact angle measurements and X-Ray reflectivity

Supplementary files

Article information

Article type
Paper
Submitted
16 Nov 2015
Accepted
06 Jan 2016
First published
07 Jan 2016

Nanoscale, 2016,8, 2927-2936

Author version available

Understanding properties of engineered catalyst supports using contact angle measurements and X-Ray reflectivity

P. B. Amama, A. E. Islam, S. M. Saber, D. R. Huffman and B. Maruyama, Nanoscale, 2016, 8, 2927 DOI: 10.1039/C5NR08108D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements