Scott C.
McKellar
a,
Jorge
Sotelo
a,
John P. S.
Mowat
b,
Paul A.
Wright
b and
Stephen A.
Moggach
*a
aEaStCHEM School of Chemistry and the Centre for Science at Extreme Conditions, University of Edinburgh, Kings Buildings, West Mains Road, Edinburgh, EH9 3JJ, UK. E-mail: s.moggach@ed.ac.uk
bEaStCHEM School of Chemistry, University of St Andrews, Purdie Building, St Andrews, KY16 9ST, UK
First published on 14th December 2015
A novel method for CO2 delivery to a porous material is reported, wherein a perfluorocarbon containing dissolved CO2 has been used as a pressure-transmitting liquid in a high-pressure single-crystal X-ray diffraction experiment. Pressure causes the gas to be squeezed out of the liquid into the host crystal, monitored via a single-crystal to single-crystal phase transition on uptake of CO2.
Previous work has shown that when surrounded by a pressure-transmitting liquid in the sample chamber of a modified Merril–Bassett diamond anvil cell (DAC), the structural response of porous metal–organic frameworks (MOFs) to pressure can be highly sensitive to the liquid used to apply hydrostatic pressure to the sample.9 For example, surrounded by a liquid small enough to penetrate the pores of the MOF, the framework can be super-filled, causing an expansion in unit cell volume as the liquid is squeezed into the void space. However, with larger media such as PFCs, the liquid is typically too large to penetrate the pore openings of most MOFs and thus direct compression of the framework occurs. These guest-dependant high-pressure results are an effective way to understand guest uptake and flexibility in porous MOFs, which have numerous potential related uses in applications such as gas storage,10 molecular separation11 and carbon capture.5 In the work presented herein, the gas-dissolving capacity of PFCs has allowed us to investigate the application of these materials not just as media for compression experiments, but also as materials for pressure-induced gas delivery.
Our approach is fundamentally very simple; for a pressure-transmitting liquid, we selected Fluorinert™ FC-77 (Fig. 1a), a mixed PFC liquid comprised of perfluorooctane (C8F18) and perfluorooxacyclononane (C8F16O). FC-77 was chosen to demonstrate proof-of-concept since the liquid remains hydrostatic up to GPa pressures13 and because it has one of the highest gas-dissolving capacities of commercially available PFCs (56 ml O2/100 ml FC-77 and 224 ml CO2/100 ml FC-77 at 37 °C).14 As a host compound, the MOF Sc2BDC3 (ref. 15) (Fig. 1b) (BDC = 1,4-benzenedicarboxylate) was used for two reasons. Firstly, Sc2BDC3 has small (<4 Å diameter) hydrophobic pore openings that can adsorb a range of small gas molecules such as CO2, carbon monoxide and methane, but the pores are too small to accommodate the bulky FC-77 molecules. Secondly, it has been shown previously that CO2 adsorption causes Sc2BDC3 to undergo a single-crystal-to-single-crystal phase transformation, characterised structurally by a slight rotation of the BDC linking molecules.12,16 Though the transition is subtle, it is easily detectable due to an associated change in crystal system from orthorhombic to monoclinic. No other guest species has been observed to trigger the phase transition. Therefore for the purposes of this work, Sc2BDC3 has been used as a CO2 sensor with the phase change serving as an elegant indicator of CO2 uptake. CO2 was dissolved in the FC-77 by bubbling CO2 gas slowly through the liquid (see ESI†). The presence of CO2 in the liquid was confirmed using IR spectroscopy (Fig. 2).
Fig. 1 Materials used to perform high-pressure, single-crystal X-ray diffraction experiments. a, Structure of Fluorinert™ FC-77; a mixed liquid consisting of perfluorooctane (C8F18) and perfluorooxacyclononane (C8F16O). b, Six-channel portion of the previously-determined monoclinic Sc2BDC3 crystal structure,12 shown with partially-occupied adsorbed CO2 molecules in the framework pores. Purple, black, red and white spheres denote Sc, C, O and H atoms respectively. c, Photograph of a modified Merril–Bassett diamond anvil cell (DAC) (depicted beside a five-pence coin for scale), with an expanded photomicrograph of the sample chamber containing a single crystal of Sc2BDC3 surrounded by CO2-loaded FC-77 liquid. |
Initial X-ray diffraction data collected on a single crystal of Sc2BDC3 at ambient temperature and pressure confirmed that the framework pores of the orthorhombic parent phase were free of any guest species (i.e. residual mother liquor solvent). Diffraction data were then collected on the same crystal whilst immersed in CO2-loaded FC-77 at ambient pressure and temperature, using a bespoke method9 whereby a Sc2BDC3 crystal was stuck to the tip of a microloop inside a polyester capillary which was then filled with the PFC. This confirmed unambiguously that the face-centred orthorhombic symmetry of the as-prepared sample was maintained (Fddd; a = 8.755(<1) Å, b = 20.779(<1) Å, c = 34.407(<1) Å15), indicating that the dissolved CO2 did not diffuse from the liquid into the crystal. A Sc2BDC3 crystal was then loaded into a DAC at 1.7 kbar, with the CO2-loaded FC-77 as a hydrostatic medium (Fig. 1c). At this pressure, crystal structure solution confirmed that the sample had adopted the monoclinic form indicative of CO2 uptake (C2/c; a = 8.6929(18) Å, b = 34.291(5) Å, c = 11.0714(19) Å, β = 111.014(13)°). Abridged crystallographic information for the ambient temperature/ambient pressure (1), ambient-pressure immersed (2) and high-pressure (3) crystal structures is provided in Table 1.
1 | 2 | 3 | |
---|---|---|---|
Chemical formula | C12H6O6Sc | C12H6O6Sc | C12H6O6Sc·0.56(CO2) |
Crystal system | Orthorhombic | Orthorhombic | Monoclinic |
Space group | Fddd | Fddd | C2/c |
T (K) | 293.0 | 293.0 | 293.0 |
a (Å) | 8.785(6) | 8.798(2) | 8.7007(13) |
b (Å) | 20.810(14) | 20.865(4) | 34.271(3) |
c (Å) | 34.480(2) | 34.551(6) | 11.0753(12) |
V (Å3) | 6303(7)s | 6342(2) | 3082.1(7) |
Z | 16 | 16 | 8 |
F (000) | 2352 | 2352 | 1176 |
Radiation type | Mo Kα | Mo Kα | Mo Kα |
μ (mm−1) | 0.48 | 0.48 | 0.49 |
Crystal size (mm) | 0.2 × 0.2 × 0.1 | 0.2 × 0.2 × 0.1 | 0.2 × 0.2 × 0.1 |
Reflections collected | 5977 | 1914 | 4125 |
Independent reflections | 831 | 771 | 972 |
Data/parameters | 823/88 | 765/88 | 906/83 |
R int | 0.059 | 0.109 | 0.093 |
ϑ max (°) | 20.8 | 20.8 | 22.7 |
R[F2 > 2s(F2)], wR(F2) | 0.031, 0.064 | 0.049, 0.111 | 0.121, 0.329 |
Δρmax, Δρmin (e Å−3) | 0.35, −0.32 | 0.76, −0.67 | 0.89, −0.76 |
This result is, to the best of our knowledge, the first of its kind. It is known from previous work17 that compression of Sc2BDC3 in FC-77 causes the framework to experience direct compression with no change in the crystal symmetry. Therefore, the observed orthorhombic-to-monoclinic phase transition is due entirely to the CO2 uptake from the hydrostatic medium, and not due to structural rearrangement as a result of compression. This result (illustrated schematically in Fig. 3) shows that with the application of pressure, it is possible to squeeze gas from a PFC liquid into a porous framework as the system seeks to fill empty space and redistribute density upon contraction.
Fig. 3 Cartoon schematic of pressure-induced CO2 loading of porous Sc2BDC3 from liquid FC-77. Colour scheme as in Fig. 1, with green spheres denoting F atoms. As pressure is applied to the Sc2BDC3 crystal in the sample chamber between two diamond culets, dissolved CO2 in the liquid is squeezed into the previously empty framework. The molecules of the FC-77 are too large to penetrate the framework. |
The CO2 guest molecules in the framework at 1.7 kbar were treated in the crystallographic model using the PLATON SQUEEZE algorithm. The calculated pore content was equivalent to 4.5 molecules of CO2 per Sc2BDC3 unit cell; a calculated uptake of 1.95 mmol g−1 at room temperature. This figure is somewhat lower than the maximum CO2 adsorption capacity measured independently for Sc2BDC3 by Miller et al.12 In this previous work, at 304 K, the type 1 adsorption isotherm up to 50 bar showed a maximum CO2 adsorption of ∼4.5 mmol g−1. However, gas uptake increased significantly at lower temperatures; the maximum uptake measured volumetrically was ∼6.5 mmol g−1, achieved at 1 bar at 195 K and at 0.006 bar (p/p0 = 1) at 150 K. It is worth noting that use of the SQUEEZE algorithm is an estimate and is ideally performed on data sets with 100% completeness,18 which is impossible in this instance due to shading by the DAC. However, we have previously shown that SQUEEZE can be used effectively in high-pressure datasets of MOFs to observe trends in pore content,19 and accurately as a quantitative validation tool using guest species which can also be modelled crystallographically.20
The results obtained here would imply that there must be a barrier for diffusion of CO2 molecules into the framework when trapped within the PFC. However it has also been shown recently that particle size can play a significant role in the gas adsorption mechanics in MOFs,21 which could explain the disparity between previous adsorption work, conducted using polycrystalline material, and the diffraction results reported here, performed using single crystals. Unfortunately, an atomistic model could not be obtained for localised CO2 sites within the MOF pores, therefore we could not determine whether the molecules retained the same geometry observed previously at 1 bar and 195 K. This is unsurprising considering the low data completeness and lower CO2 uptake at 1.7 kbar observed here. In previous measurements, only polarised infrared spectroscopy has been able to shed light on the orientation of CO2 molecules within Sc2BDC3 at room temperature.22
The pressure in the DAC was then increased to 4.4 kbar in an attempt to push the limit of CO2 uptake from FC-77. At this pressure the Sc2BDC3 crystal fractured and the resolution of the data decreased rapidly (≈1.3 Å). Nevertheless, the sample could still be confirmed as being in the crystalline monoclinic phase. This work is the first example of a penetrating (CO2) and a non-penetrating (FC-77) medium being used simultaneously, so it is therefore interesting to speculate on the competing effect of the two given the different structural response that can be produced in porous frameworks. Previous work17 has shown that native Sc2BDC3 is not stable at pressures over ∼4 kbar whilst under direct compression in Fluorinert™. However, super-filling of MOFs with penetrating guest molecules stabilises the frameworks to high pressures. It would therefore appear then, that even at low loadings of CO2, the crystalline phase is stabilised to external pressure, preventing amorphisation. When comparing the unit cell parameters of the monoclinic Sc2BDC3 at 1.7 kbar to the data collected at 4.4 kbar, contraction of all the unit cell axes takes place – as opposed to lengthening along the more flexible directions as is common in super-filled frameworks – suggesting that the direct compression at higher pressures exerted by the FC-77 outweighs any effect of possible super-filling with CO2. Given the low uptake of CO2 previously calculated, and the fact that the sample is still crystalline at 4.4 kbar, it is easy to envisage that further filling of the pores with CO2 molecules may occur, further stabilising the crystalline monoclinic phase to amorphisation, but this requires further investigation.
Though this method of using PFCs for gas-loading crystalline compounds under pressure is by no means limited to MOFs (nor is the gas necessarily limited to CO2), Sc2BDC3 is a useful material to demonstrate the application of the method since the use of porous MOFs as gas storage agents is currently a source of enormous interest in the research community.23 This has been driven by advances in separation and carbon sequestration technologies5,6 in line with global government targets for cleaner energy and the reduction of CO2 emissions.7,24 Innovative routes to CO2 storage and the measurement of storage capacity is vital information for researchers considering scale-up and application of a particular MOF. Determination of the storage capacity via the construction of adsorption isotherms is usually performed using gravimetric or calorimetric analyses over a range of different temperatures and pressures,12,25–29 often requiring gram-scale quantities of material. The results from our proof-of-concept study indicate that, in one experimental step, we can fill the pores with CO2 and calculate the pore content with just one single crystal surrounded by FC-77 in a sample chamber of ∼0.01 μL. Moreover, since our experiment is performed at room temperature, the structural response observed in the framework is more reflective of potential real-world gas storage material applications than the low temperatures used for adsorption isotherm construction, or indeed for standard X-ray diffraction experiments. We propose that as a method to quickly and efficiently probe the gas uptake and structural response of a material, pressure-induced gas loading from a PFC represents a unique approach and a complementary technique to classical gravimetric methods.
We thank the Royal Society of Edinburgh and the Scottish Government for a fellowship to Dr Stephen A. Moggach, and the Leverhulme Trust for financial support.
Footnote |
† Electronic supplementary information (ESI) available: Experimental details on data collection, reduction and refinement, CO2 dissolution and IR spectroscopy. CCDC 1405820–1405822 contains the supplementary crystallographic data for this paper. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/c5ce01989c |
This journal is © The Royal Society of Chemistry 2016 |