View PDF VersionPrevious ArticleNext Article

Open Access Article
This Open Access Article is licensed under a
Creative Commons Attribution 3.0 Unported Licence
DOI: 10.1039/C5TC90053K (Correction) J. Mater. Chem. C, 2015, 3, 3500-3500

Correction: Approaches for fabricating high efficiency organic light emitting diodes

Jwo-Huei Jou *a, Sudhir Kumar a, Abhishek Agrawal ab, Tsung-Han Li a and Snehashis Sahoo a
aDepartment of Materials Science and Engineering, National Tsing Hua University, Hsin-Chu 30013, Taiwan, Republic of China. E-mail: jjou@mx.nthu.edu.tw
bAmity Institute of Nanotechnology, Amity University, Noida-201301, India

Received 4th March 2015 , Accepted 4th March 2015

First published on 13th March 2015

Abstract

Correction for ‘Approaches for fabricating high efficiency organic light emitting diodes’ by Jwo-Huei Jou et al., J. Mater. Chem. C, 2015, DOI: 10.1039/c4tc02495h.

Incorrect figures appear in this review for Fig. 20 and 21. The correct figures are given below:
image file: c5tc90053k-f20.tif
Fig. 20 Schematic energy level diagram for a low voltage simple exciplex OLED device.1

image file: c5tc90053k-f21.tif
Fig. 21 Device architectures of conventional and p–i–n OLEDs.

The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.

References

  1. V. Jankus, C. J. Chiang, F. Dias and A. P. Monkman, Adv. Mater., 2013, 25, 1455 CrossRef CAS PubMed.
This journal is © The Royal Society of Chemistry 2015