Issue 40, 2015

High temperature thermoelectric properties of Zn-doped Eu5In2Sb6

Abstract

The complex bonding environment of many ternary Zintl phases, which often results in low thermal conductivity, makes them strong contenders as thermoelectric materials. Here, we extend the investigation of A5In2Sb6 Zintl compounds with the Ca5Ga2As6 crystal structure to the only known rare-earth analogue: Eu5In2Sb6. Zn-doped samples with compositions of Eu5In2−xZnxSb6 (x = 0, 0.025, 0.05, 0.1, 0.2) were synthesized via ball milling followed by hot pressing. Eu5In2Sb6 showed significant improvements in air stability relative to its alkaline earth metal analogues. Eu5In2Sb6 exhibits semiconducting behavior with possible two band behavior suggested by increasing band mass as a function of Zn content, and two distinct transitions observed in optical absorption measurements (at 0.15 and 0.27 eV). The p-type Hall mobility of Eu5In2Sb6 was found to be much larger than that of the alkaline earth containing A5In2Sb6 phases (A = Sr, Ca) consistent with the reduced hole effective mass (1.1 me). Zn doping was successful in optimizing the carrier concentration, leading to a zT of up to 0.4 at ∼660 K, which is comparable to that of Zn-doped Sr5In2Sb6.

Graphical abstract: High temperature thermoelectric properties of Zn-doped Eu5In2Sb6

Article information

Article type
Paper
Submitted
04 Jun 2015
Accepted
31 Jul 2015
First published
31 Jul 2015

J. Mater. Chem. C, 2015,3, 10518-10524

Author version available

High temperature thermoelectric properties of Zn-doped Eu5In2Sb6

S. Chanakian, U. Aydemir, A. Zevalkink, Z. M. Gibbs, J. Fleurial, S. Bux and G. Jeffrey Snyder, J. Mater. Chem. C, 2015, 3, 10518 DOI: 10.1039/C5TC01645B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements