Issue 32, 2015

Reliable doping and carrier concentration control in graphene by aerosol-derived metal nanoparticles

Abstract

Reliable doping and carrier concentration control in graphene have been realized by depositing aerosol-derived metal nanoparticles (NPs) with consistent size and configuration on the channel of a graphene field-effect transistor. Here, the spherically shaped Ag or Pt NPs with a fairly narrow size distribution of 7.5 ± 1.5 or 6.4 ± 1.4 nm, respectively, have been produced through the spark discharge process. The transfer characteristics show that Ag NPs deposited on graphene induce n-type conduction with an electron concentration of 0.3–1.9 × 1012 cm−2 at a NP surface coverage of 12–21%, while Pt NPs lead p-type doping with a hole concentration of 3.9–5.2 × 1012 cm−2 at 24–32% surface coverage. The observed electrical transport properties are interpreted as the metal NP doping-induced Fermi level shift of initially p-type doped graphene by the adsorbed oxygen molecules under ambient conditions. Also, the minimum conductance at the Dirac point before and after the deposition of metal NPs shows no appreciable change, implying the absence of noticeable sp3 hybridization of the graphene surface due to aerosol-derived NPs.

Graphical abstract: Reliable doping and carrier concentration control in graphene by aerosol-derived metal nanoparticles

Article information

Article type
Communication
Submitted
20 May 2015
Accepted
05 Jul 2015
First published
07 Jul 2015

J. Mater. Chem. C, 2015,3, 8294-8299

Reliable doping and carrier concentration control in graphene by aerosol-derived metal nanoparticles

J. Lee, H. Sung, M. S. Jang, H. Yoon and M. Choi, J. Mater. Chem. C, 2015, 3, 8294 DOI: 10.1039/C5TC01443C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements