Anand
Narani
a,
Ramesh Kumar
Chowdari
b,
Catia
Cannilla
c,
Giuseppe
Bonura
c,
Francesco
Frusteri
c,
Hero Jan
Heeres
*b and
Katalin
Barta
*a
aStratingh Institute for Chemistry, Faculty of Mathematics and Natural Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
bChemical Engineering Department, Faculty of Mathematics and Natural Science, University of Groningen, Nijenborgh 4, 9747 AG Groningen, The Netherlands
cCNR-ITAE, Istituto di Tecnologie Avanzate per l'Energia “Nicola Giordano”, Via S. Lucia sopra Contesse 5, 98126 Messina, Italy. E-mail: k.barta@rug.nl; h.j.heeres@rug.nl; Tel: +31 (0)503634174
First published on 28th August 2015
Efficient catalytic hydrotreatment of Kraft lignin to yield aromatic monomers was demonstrated in supercritical methanol using a variety of NiW and NiMo catalysts on acidic, basic and neutral supports. It was found that NiW catalysts on neutral or basic supports are highly suitable for depolymerization of Kraft lignin to methanol soluble organics in high yields at 320 °C and 35 bar H2 pressure. An extensive analysis of the product mixtures was carried out using GC-MS-FID, GC × GC-FID, 2D HSQC NMR, GPC and elemental analysis, and several techniques were used for the characterization of the prepared catalysts in order to determine the acidity and basicity of the support and morphological changes after the catalytic reaction. The best results were obtained with sulphided NiW catalysts supported on activated carbon. Efficient depolymerization of Kraft lignin and a total 28 wt% monomer yield was obtained within 8 h and 76% of the products were alkylphenolics and guaiacolics. Over prolonged reaction times, the total monomer yield reached 35 wt%, containing up to 26 wt% alkylphenolics. During catalytic processing, deoxygenation was the most prevalent reaction and, importantly, no competing aromatic ring hydrogenation or undesired repolymerization to insoluble char was observed. The catalytic system described here represents a highly efficient and selective method for the production of alkylphenolics and guaiacolics from Kraft lignin.
Kraft lignins are obtained through the sulphide pulping process, and typically contain 1–3% sulphur in both inorganic as well as organically bound forms.11,12 Moreover, due to the extensive pulping, the structure of Kraft lignins is more condensed, and contains a higher amount of C–C bonds compared to other types of lignins.13–16 From this follows, that Kraft lignin is a particularly challenging substrate for catalytic processing, especially with noble metal catalysts which are frequently poisoned by sulphur.3,4,7,8,17
Over the past decade, significant advances have been made in the development of new processes for the depolymerization of lignin. Most of these methods typically targeted organosolv lignins and ranged from thermal or hydrothermal depolymerization18–21 to milder oxidative or reductive methods22–24 most of which have been extensively reviewed.4,7,8,17,18,25–28 Among the developed methods, reductive approaches have received particular attention, since they enable the direct hydrogenolysis of the most prevalent β-O-4 lignin linkage.29–33 Alternatively, protic solvents such as methanol,34 ethanol,35–37 isopropanol,38 formic acid,39–42 or water/alcohol mixtures43,44 could serve as hydrogen donors for the various depolymerization and deoxygenation processes. Furthermore, water has been proven as a suitable reaction medium.45,46
Methods that specifically target Kraft lignin have also been described. For instance, Miller et al. described the efficient depolymerization of Kraft and organosolv lignins in supercritical methanol and ethanol in the presence of KOH.47 In similar work, Shabtai described two step depolymerization of lignin in the presence of a base.48 Weckhuysen and co-workers reported a two-step process for the conversion of various lignins, including Kraft to aromatic compounds (<12 wt% yield) during which lignin was depolymerized using a Pt/γ-Al2O3 catalyst in alkaline ethanol/water medium and the obtained bio-oil was subsequently deoxygenated with CoMo/Al2O3 and Mo2C/CNF catalysts.49 In another process, Kraft lignin was depolymerised using formic acid as a hydrogen source in water/ethanol medium without any catalyst.50
Recent work by Ma et al. has reported that high yields (61.3 wt%) of aromatic compounds can be obtained from Kraft lignin in supercritical ethanol over MoC1−x/AC catalysts.51 In this system ethanol acted as a hydrogen source, but was also found to incorporate into the formed products by alkylation reactions. Side reactions of the solvent alone resulting in aliphatic products also occurred. Nonetheless this important work pointed at the suitability of molybdenum as an active metal in Kraft lignin depolymerization. More recently, a one-pot complete catalytic conversion of Kraft lignin into C6–C10 chemicals, has been reported in ethanol, using Mo-based catalysts.52
The depolymerization of Kraft lignin is a challenging task due to the highly condensed structure of the substrate as well as its relatively high sulphur content, which may lead to catalyst deactivation.4,12 Therefore the selection of the catalyst should take into account the high sulphur content of the lignin source. It is well known that NiMo and CoMo catalysts are tolerant towards sulphur and are widely used in the hydrodeoxygenation of aromatic compounds to simpler aromatics or hydrocarbons.53,54 They have recently been reported as suitable catalysts for the hydrodeoxygenation of lignin model compounds,55 and for lignin as discussed above.
Here we report the highly efficient catalytic hydrotreatment of Kraft lignin to yield value added low molecular weight aromatics, specifically alkylphenolics and guaiacolics in supercritical methanol in the presence of hydrogen. A variety of supported Mo and W catalysts promoted by Ni and Co on various supports have been tested and the best composition identified. Under optimal reaction conditions, the main products are alkylphenolics and gratifyingly no ring hydrogenation or char formation takes place. The catalyst is thoroughly characterized before and after the reaction.
The catalysts NiO–MoO3/AC (NiMo/AC), CoO–MoO3/AC (CoMo/AC) and NiO–WO3/AC (NiW/AC) with 5 wt% of NiO or CoO and 15 wt% of WO3 or MoO3 were deposited on activated carbon by impregnation of about 3–4 mL of aqueous solutions of Ni(NO3)2·6H2O or Co(NO3)2·6H2O and (NH4)6Mo7O24·4H2O or (NH4)6H2W12O40·H2O followed by evaporation to dryness at 100 °C for 12 h and calcination under a N2 atmosphere at 450 °C for 5 h. In a similar method 5 wt% NiO–15 wt% MoO3, 5 wt% CoO–15 wt% MoO3 as well as 5 wt% NiO–15 wt% WO3 on different supports were prepared.
Sulphided catalysts were generated in situ by the addition of dimethyldisulphide (DMDS) to the reaction mixture at the start of the reaction.57 (For the detailed pathways related to in situ preparation of the catalysts see the ESI, Appendix A.†) The sulphided NiW catalysts supported on AC, ZSM-5, MgO–La2O3, MgO–CeO2, MgO–ZrO2 catalysts are designated as S-NiW/AC, S-NiW/ZSM-5, S-NiW/ML, S-NiW/MC, S-NiW/MZ respectively. Similarly, sulphided Ni, W, NiMo, and CoMo supported on AC catalysts are abbreviated as S-Ni/AC, S-W/AC, S-NiMo/AC and S-CoMo/AC. For more detailed information of catalyst characterization techniques, see the ESI, Appendix B.†
Scheme 1 Procedure developed for the fractionation of the crude product mixture obtained after catalytic treatment of Kraft lignin. |
Methanol soluble oils were analysed by GC-MS-FID analyses using a Quadruple Hewlett Packard 6890 MSD attached to a Hewlett Packard 5890 GC equipped with a 60 m × 0.25 mm i.d. and a 0.25 μm sol–gel capillary column. The injector temperature was set at 250 °C. The oven temperature was kept at 40 °C for 5 minutes then heated up to 250 °C at a rate of 3 °C min−1 and then held at 250 °C for 10 minutes.
GC × GC-FID analysis was performed on organic samples with a trace GC × GC from Interscience equipped with a cryogenic trap system and two columns: a 30 m × 0.25 mm i.d. and a 0.25 μm film of the RTX-1701 capillary column connected by using a meltfit to a 120 cm × 0.15 mm i.d. and a 0.15 μm film Rxi-5Sil MS column. An FID detector was used. A dual jet modulator was applied using carbon dioxide to trap the samples. Helium was used as the carrier gas (continuous flow 0.6 ml min−1). The injector temperature and FID temperature were set at 250 °C. The oven temperature was maintained at 40 °C for 5 minutes then heated up to 250 °C at a rate of 3 °C min−1. The pressure was set at 70 kPa at 40 °C. The modulation time was 6 s.
For GC × GC-FID and GC-MS-FID analyses, the samples were diluted with tetrahydrofuran (THF) and 500 ppm di-n-butyl ether (DBE) was added as an internal standard. For more detailed information see the ESI, Appendix C.†
Gel Permeation Chromatography (GPC) analyses of the samples were performed using a HP1100 equipped with three 300 × 7.5 mm PL gel 3 μm MIXED-E columns in series using a GBC LC 1240 RI detector. Average molecular weight calculations were performed using the PSS WinGPC Unity software from Polymer Standards Service. The following conditions were used: THF as the eluent at a flow rate of 1 ml min−1; 140 bar, a column temperature of 40 °C, 20 μl injection volume and a 10 mg ml−1 sample concentration. Toluene was used as a flow marker.
The gas phases were collected after the reaction and stored in a gas bag (SKC Tedlar 3 L sample bag [9.5′′ × 10′′]) with a polypropylene septum fitting. GC-TCD analyses were performed using a Hewlett Packard 5890 Series II GC equipped with a Poraplot Q Al2O3/Na2SO4 column and a molecular sieve (5 A) column. The injector temperature was set at 150 °C and the detector temperature at 90 °C. The oven temperature was maintained at 40 °C for 2 minutes then heated up to 90 °C at 20 °C min−1 and maintained at this temperature for 2 minutes. A reference gas was used to identify the peaks by retention time and to quantify the products (gas product mixture: 55.19% H2, 19.70% CH4, 3.00% CO, 18.10% CO2, 0.51% ethylene, 1.49% ethane, 0.51% propylene and 1.5% propane).
NMR spectra were acquired at 25 °C using an Agilent 400 MHz spectrometer. Approximately 50 mg of methanol soluble oil was dissolved in 0.7 ml dimethylsulfoxide-d6 (DMSO). For analysis of the Kraft lignin, approximately 100 mg was dissolved in 0.7 ml dimethylsulfoxide-d6 (DMSO). 1H–13C HSQC spectra were acquired using a standard pulse sequence HSQC programme with a spectral width of 160 ppm, 16 scans, 128 increments (256 increments for Kraft lignin), on F1 dimension and data were processed using the MestReNova software.
Elemental analyses (C, H, N and S) were performed using a Euro Vector 3400 CHN-S analyzer. The oxygen content was determined by difference.
These catalysts were tested in the depolymerization of Kraft lignin at 320 °C, 35 bar H2 for 8 h in supercritical methanol and dimethyldisulphide was used as a sulphur source. The reaction products were fractionated by the developed procedure (see Scheme 1 in the Experimental section). This consisted of a separate treatment of reaction solids followed by quantification of the amount of the methanol soluble material, a crucial parameter and indication for the activity of the respective catalysts (for calculation of the main parameters determined, see Appendix D in the ESI†). Gel permeation chromatography measurements confirmed that the methanol soluble oil mainly consists of aromatic monomers and oligomers of lower molecular weight ranges (see the ESI, Table S2 and Fig. S3-a†). The DCM soluble solids were identified as higher molecular weight materials (see the ESI, Table S2 and Fig. S3-b†). The brown DMSO soluble fraction was believed to be unreacted lignin, however due to its low solubility in THF, its molecular weight could not be determined accurately. The rest of the solids were visually assessed to be a mixture of char and catalysts.
The catalyst screening was conducted at 320 °C and 35 bar of H2 using the prepared catalysts in order to determine the most suitable composition and support for maximizing the yield of methanol soluble products. First, simply heating Kraft lignin without a catalyst and hydrogen resulted in only 15 wt% of methanol soluble oil and 30 wt% of insoluble char (Table 1, entry 1). When S-NiMo on activated carbon without external hydrogen was tested, the results were comparable to a blank experiment with only 22 wt% of methanol soluble oil yields and a more substantial (30 wt%) amount of char obtained (Table 1, entry 2). The same catalyst (S-NiMo/AC) with external hydrogen delivered a promising 57 wt% of methanol soluble oil yield and only traces of char (Table 1, entry 3). These findings indicate that the presence of external hydrogen is important, as it likely reduces the extent of recondensation reactions and/or enhances the rate of lignin depolymerisation reactions. In addition, unlike during our previous studies with CuPMO (Cu doped Mg–Al porous metal oxide) in supercritical methanol, where methanol reforming was the only source of hydrogen,60 the NiMo catalysts required external hydrogen that played a key role in affecting lignin depolymerization, as no significant methanol reforming was observed in the present case, as expected. For a related catalyst, comprising Co instead of Ni, (S-CoMo/AC) only 41 wt% of methanol soluble oil yield and 9 wt% of char were obtained (Table 1, entry 4). This is likely due to the increase in the acidity of the catalyst when Ni was replaced with Co (Table 2, entry 7). This indicates that Ni promoted Mo is more active than Co promoted Mo for lignin depolymerization. Subsequently, when Mo was replaced with W (i.e., S-NiW/AC), the acidity of the catalyst further decreased (Table 2, entry 1), causing the methanol soluble oil yield to increase to 82 wt% without any char formation (Table 1, entry 8), representing the best product yield among the screened catalysts. As a comparison, the methanol soluble oil yields dropped to 62 wt% and 8 wt% of char (Table 1, entry 5) obtained with the non sulphided NiW/AC catalyst. Thus, the sulphided catalyst was clearly more active. Further studies confirmed that the sulphided Ni promoted W catalysts are more active than the corresponding non-sulphided NiW/AC and S-NiMo/AC catalysts or Ni/AC and S-W/AC catalysts alone (Table 1, entries 5, 3, 7 and 6).
Entry | Catalyst | Methanol soluble oil (wt%) | DCM soluble solids (wt%) | DMSO soluble solids (wt%) | Char (wt%) | Mass balance (wt%) |
---|---|---|---|---|---|---|
Reaction conditions: catalyst (0.25 g), Kraft lignin (1 g), methanol (30 ml), H2 (35 bar), temperature (320 °C), 8 h.a Without hydrogen added.b With 2 g of Kraft lignin. | ||||||
1 | Blank | 15 | 8 | 20 | 30 | 73 |
2 | S-NiMo/ACa | 22 | 10 | 8 | 30 | 70 |
3 | S-NiMo/AC | 57 | 10 | 8 | Trace | 75 |
4 | S-CoMo/AC | 41 | 6 | 10 | 9 | 66 |
5 | NiWOx/AC | 62 | 14 | 8 | 8 | 92 |
6 | S-W/AC | 45 | 2 | 30 | 5 | 82 |
7 | S-Ni/AC | 70 | 5 | 7 | 0 | 82 |
8 | S-NiW/AC | 82 | 10 | Trace | 0 | 92 |
9 | S-NiW/ZSM-5 | 40 | 3 | 13 | 30 | 86 |
10 | S-NiW/ML | 80 | 9 | Trace | 0 | 89 |
11 | S-NiW/MC | 75 | 11 | 9 | 0 | 95 |
12 | S-NiW/MZ | 68 | 6 | 12 | 4 | 90 |
13 | S-NiW/ACb | 60 | 20 | 15 | 0 | 95 |
14 | S-NiW/MLb | 60 | 22 | 16 | 0 | 98 |
Entry | Catalyst | NH3 uptake (μmol gcat−1) | CO2 uptake (μmol gcat−1) |
---|---|---|---|
1 | NiW/AC | 18.4 | 0.6 |
2 | NiW/ZSM-5 | 507.6 | — |
3 | NiW/MgO–La2O3 | — | 291.0 |
4 | NiW/MgO–CeO2 | — | 188.3 |
5 | NiW/MgO–ZrO2 | — | 104.7 |
6 | NiMo/AC | 44.5 | 0.6 |
7 | CoMo/AC | 77.0 | 0.7 |
Once established that a bimetallic Ni/W catalyst is the best regarding product yield, we have subsequently investigated whether the support also plays a significant role. To this end, NiW catalysts supported on basic MgO–La2O3 (ML), MgO–CeO2 (MC), MgO–ZrO2 (MZ) and acidic ZSM-5 catalysts (for acid and base properties, see Table 2, entries 2–5) were screened and indeed the variations in product yields were significant. Using the NiW catalyst on the acidic ZSM-5 support, 30 wt% of the insoluble residue and only 40 wt% of methanol soluble oil yields were observed (Table 1, entry 9), showing more pronounced recondensation processes likely due to acid catalysed side reactions leading to reactive unsaturated intermediates, such as dehydration products. The results using basic supports MgO–La2O3 were not significantly different from those obtained with the catalyst on neutral support (Table 1, entry 10). When MgO–CeO2 was used, the methanol soluble oil yields dropped to 75 wt% and 9 wt% DMSO soluble solids obtained (Table 1, entry 11). In the case of MgO–ZrO2, the methanol soluble oil yields further dropped to 68 wt%, increase in DMSO soluble solids (12 wt%) and 4 wt% of char was observed (Table 1, entry 12). This phenomenon is likely due to the decrease in basicity or the increase in acidity of the catalysts when La2O3 was replaced in MgO–La2O3 with CeO2 and ZrO2 (Table 2, entries 4 and 5). Lastly, with increased lignin loading to 2 g, both S-NiW/AC and S-NiW/ML catalysts gave 60 wt% of methanol soluble oil yields, whereby more DCM and DMSO soluble solids were obtained with both catalysts. Char formation was not observed with both catalysts even at increased substrate loading.
It was found that NiW supported on ZSM-5 presents the highest number of acidic sites (507.6 μmol gcat−1), while the highest basic capacity was recorded on NiW supported on MgO–La2O3 (291 μmolCO2 gcat−1). Moreover, when La2O3 was exchanged with CeO2 (Table 2, entry 4) or ZrO2 (Table 2, entry 5), the basicity significantly decreased, resulting in CO2 uptake values of 188.3 and 104.7 μmolCO2 gcat−1 for NiW/MgO–CeO2 and NiW/MgO–ZrO2, respectively. Still, when NiW was supported on activated carbon (Table 2, entry 1), not only the NH3 adsorption capacity appeared quite low (18.4 μmol gcat−1), but also the basicity was practically negligible (0.6 μmolCO2 gcat−1), giving the sample an almost neutral character. A net increase of acidity was observed on the same support when W was exchanged with Mo (44.5 μmolNH3 gcat−1 for NiMo/AC), likely due to an increased presence of clusters, which are able to delocalize protons among the neighboring MoOx species more than in the presence of isolated groups. Lastly, the substitution of NiO with CoO on activated carbon (Table 2, entry 7) also promoted a further increase of acidity (77.0 μmolNH3 gcat−1 for CoMo/AC), while the basicity remained almost unchanged. In conclusion, it is clear that the supports play a key role in determining the acid–base behaviour, while the metal loading mainly affects the temperature of peak desorption, depending on a weak or strong metal–support interaction (see also Fig. S4 and S5 and related comments in the ESI†). So, from these results the following scale of acidity and basicity can be drawn:
In the attempt of confirming the sulphidation process, the spent catalyst NiW/AC, recovered after the reaction, was characterized by X-ray diffraction and in Fig. 1 the patterns of the fresh (a) and used (b) catalysts are compared. Before the reaction, typical crystalline peaks referred to the <100>, <−111> and <002> planes of a monoclinic phase of NiWO4 (JCPDS 150755) were evident, along with Ni metallic (JCPDS 040850) diffraction peaks at 44.55°, 51.91°, 76.34° and 92.89°, corresponding to <111>, <200>, <220> and <311> planes, respectively. The spent catalyst, indeed, shows the characteristic signals of tungsten sulphide (WS2) at 14°, 32.7°, 33.4°, 39.4°, 43.8°, 49.8° and 58.7° which are referred to the <002>, <100>, <101>, <006>, <105> and <110> planes (JCPDS 080237) and the peaks of the trigonal nickel sulphide Ni3S2 phase, observed at 21.65°, 30.9°, 37.6°, 44.4°, 20.1°, 54.9°, and 55.2°, corresponding to the <101>, <012>, <003>, <021>, <202>, <211>, <104>, <122> planes (JCPDS 020772).
Fig. 1 XRD patterns of NiW/AC catalysts: (a) sulphided (after reaction), (b) fresh (before reaction). |
The formation of sulphided NiW/AC was further confirmed by SEM-EDAX measurement, which showed the presence of about 2 wt% of sulphur in the used catalyst (see EDAX values reported in Table S3†). Fig. 2 exhibits the micrographs of fresh and used NiW/AC catalysts, showing that the spent catalyst maintains the original structure characterized by particles in the range comprised between 10 and 100 μm. The insert reported in Fig. 2-b is the mapping of the S-NiW/AC catalyst, which shows the almost homogeneous distribution of sulphur in correspondence to Ni and W.
Fig. 2 SEM micrographs of NiW/AC catalysts (a) fresh, and (b) used. In the insert, the mapping measurement is shown. |
Fig. 3 GC-MS-FID chromatogram of methanol soluble oil obtained at 320 °C for 8 h with 35 bar H2 using S-NiW/AC catalysts. |
Fig. 4 Effect of catalysts on alkylphenolics, guaiacolics and monomer yields. Reaction conditions: catalyst (0.25 g), Kraft lignin (1 g), methanol (30 ml), H2 (35 bar), temperature (320 °C), 8 h. |
The two most important groups of products (alkylphenolics and guaiacolics) were quantified and are displayed for each run in Fig. 4. The total number of monomers is also given, which include, besides the alkylphenolics and guaiacolics, other compounds such as naphthalenes, catechols, other aromatics and linear and branched alkanes (see the ESI, Table S4†). Similarly to the results obtained by gravimetric quantification of the various fractions (Table 1), there is a clear difference between the individual runs in terms of yields of total alkylphenolics and guaiacolics, which depend on the activity of the respective catalyst towards depolymerization. Also, the hydrodeoxygenation activity of the catalyst is correlated with the amount of alkylphenolics versus guaiacolics present.
Without hydrogen only 6.5 wt% of monomers were obtained with S-NiMo/AC and this amount increased to 14.5 wt% in the presence of hydrogen. Better results were obtained when Mo was replaced by W. With S-NiW/AC, a significantly higher (28.5 wt% monomer yield) was obtained; including 16 wt% of alkylphenolics and 5.5 wt% of guaiacolics (see also Table S4,† entry 7).
Good results were obtained with the other types of catalysts as well: S-NiMo/AC (14.5 wt%), S-CoMo/AC (9 wt%) and non-sulphided NiWOx/AC (16.5 wt%). Without the Ni promoter or with S-Ni/AC without W, the monomer yields decreased to 20.5 wt% and 19 wt% respectively. The acidic ZSM-5 support generally gave lower monomer yields (18%) than the basic supports. Especially MgO–La2O3 (ML) gave monomer yields comparable to the activated carbon support (26.5 wt%). Thus the monomer yields depend on reaction conditions, type of metal, promoter and type of support as expected. Sulphidation and combination of Ni with W on neutral support were ideal for obtaining higher monomer yields.
Entry | Temp. (°C) | Methanol soluble oil (wt%) | DCM soluble products (wt%) | DMSO soluble solids (wt%) | Monomer yields (wt%) |
---|---|---|---|---|---|
Reaction conditions: catalyst (0.25 g), Kraft lignin (1 g), methanol (30 ml), H2 (35 bar), 8 h. | |||||
1 | 280 | 60 | 1 | 35 | 20 |
2 | 300 | 65 | 4 | 28 | 23 |
3 | 320 | 82 | 10 | Trace | 28.5 |
Next, we have carried out experiments under standard reaction conditions (320 °C, 35 bar H2 with the S-NiW/AC catalyst) with different reaction times to enhance the yield of aromatic monomers and to determine the extent of possible competing ring hydrogenation reactions that may lead to alkanes. The results summarized in Table 4 indicate that 4 h of reaction time was not sufficient for full lignin conversion. In this case, the yield of the methanol soluble product fraction was 40 wt% (14.5 wt% of monomer yield), which is substantially lower than that at standard reaction times (8 h, 82 wt% methanol soluble oil and 28.5 wt% of monomers). An increase in overall monomer yield to 32.5 wt% took place at 16 hours, as depolymerization of oligomeric components in the methanol soluble fraction progressed. No significant change was further observed after a prolonged reaction time (24 h) and no char was formed. The slight increase in monomer yields (35 wt%) was likely due to further methylation of the formed fragments as confirmed by various techniques (GC-MS-FID, GC × GC-FID, HSQC NMR).
Entry | Time (h) | Methanol soluble oil (wt%) | DCM soluble products (wt%) | DMSO soluble solids (wt%) | Monomer yields (wt%) |
---|---|---|---|---|---|
Reaction conditions: catalyst (0.25 g), Kraft lignin (1 g), methanol (30 ml), H2 (35 bar), temperature (320 °C). | |||||
1 | 4 | 40 | 1 | 30 | 14.5 |
2 | 8 | 82 | 10 | Trace | 28.5 |
3 | 16 | 77 | 4 | Trace | 32.5 |
4 | 24 | 79 | 7 | Trace | 35.0 |
The GC-MS-FID and GC × GC-FID chromatograms (Fig. 5 and 6) of the methanol soluble oils versus time show a clear change in product distribution. Guaiacol (1) and substituted guaiacols (2, 3, 4) were the major products and small amounts of alkylphenolics including phenol were observed after 4 h. At prolonged reaction times, the amounts of guaiacolics are reduced and more alkylphenolics are formed. After 24 h of reaction time almost all guaiacolics were absent and only alkylphenolics were observed. In addition, methylation was more extensive after 24 h, as is evident by the formation of tetra alkylated phenolics (14, 15, 16). Notably, further hydrodeoxygenation or competing ring-hydrogenation did not occur even after 24 h of reaction time. Thus it can be concluded, that the catalyst (S-NiW/AC) is highly suitable, active and selective towards the formation of mono-oxygenated alkylphenolics from Kraft lignin.
Fig. 5 GC-MS-FID chromatograms of methanol soluble fractions obtained at different reaction times over the S-NiW/AC catalyst at 320 °C for 8 h with 35 bar H2. |
In addition, the composition of the obtained product mixtures at various time points was quantified by GC × GC-FID analysis, and the results are summarized in Fig. 7. The amount of the major components (alkylphenolics and guaiacolics) vs. time is displayed in Fig. 8. After 4 h of reaction time, 10 wt% of guaiacolics and only 2.5 wt% of alkylphenolics were present in the reaction mixture. At prolonged reaction times the amount of guaiacolics decreased to about 1.5 wt%, whereas the amount of alkylphenolics increased to a maximum of 26 wt% after 24 h. The graphs convincingly show that no substantial aromatic ring hydrogenation activity was observed, even after prolonged reaction times.
Fig. 8 Yields of alkylphenolics and guaiacolics vs. batch time, in the product mixture obtained using the S-NiW/AC catalyst at 320 °C with 35 bar H2. |
HSQC NMR measurements confirmed the structural changes during the catalytic hydrotreatment. This NMR method was used before for the elucidation of the Kraft lignin structure.62,63 The HSQC NMR spectrum of the starting lignin in DMSO is shown in Fig. 9-a. The main inter-unit linkages: β-O-4, β–β, β-5, α-O-4 are clearly seen in the δ 3–5.5 ppm (1H) and δ 50–90 ppm (13C) regions. Signals corresponding to the aromatic region of the respective subunits are observed between δ 6–8 ppm (1H), δ 100–140 ppm (13C). The chemical shift regions corresponding to the various methoxy-groups belonging to guaiacyl or syringyl subunits are detected in the range of δ 3.2–4.2 ppm (1H), δ 56–58 ppm (13C), consistent with the literature. The 2D-HSQC NMR spectrum of the methanol soluble oil obtained after depolymerization of Kraft lignin after 8 h of reaction time with the S-NiW/AC catalyst at 320 °C is shown in Fig. 9-b. After depolymerisation, the signals belonging to the interunit lignin linkages are lacking and new peaks arise, that are related to the main types of aromatic products confirmed by GC-MS-FID or GC × GC-FID measurements. There is also a decrease of methoxy signals belonging to lignin in the region as well as a marked increase of signals in the aliphatic region, belonging to the formed alkyl-phenolics and guaiacolics. In addition, signals in Area 1 of the aromatic region correspond to aromatic protons of both guaiacolics and phenolics, these being practically indistinguishable due to extensive overlap. Area 2 of the aromatic region however, corresponds to only phenolics and alkylphenolics. These results confirm that under catalytic hydrotreatment conditions, the interunit linkages of lignin have been cleaved to produce guaiacolics, which are further demethoxylated to alkylphenolics.
Finally, Fig. 11 shows the changes in the O/C and H/C atomic ratios determined by elemental analysis in the product oils obtained at 320 °C with S-NiW/AC catalysts at different reaction times. The Kraft lignin used in this study contains 61.1% of carbon, 5.6% of hydrogen, 1.6% sulphur and 30.6% of oxygen. The observed continuous decrease in the O/C value from 0.375 (Kraft lignin) to 0.112 and a marked increase in the H/C value of 1.102 (Kraft lignin) to 1.298 reflects the nature of transformations expected during catalytic hydrotreatment of Kraft lignin in supercritical methanol.
The decrease in the O/C atomic ratio value is due to the deoxygenation reactions, and the slight increase in the H/C atomic ratio is primarily due to methylation reactions and not because of ring hydrogenation, as confirmed by GC analysis.
Excellent, 35 wt% monomer yields were achieved with a sulphided S-NiW/AC catalyst and the product mixture contained up to 26 wt% alkylphenolics, moreover, competing ring hydrogenation or severe repolymerisation to insoluble char was not observed. This stands among the best results in the conversion of Kraft lignin and will lead to the development of efficient methods for the valorisation of lignin waste streams in the future.
Footnote |
† Electronic supplementary information (ESI) available. See DOI: 10.1039/c5gc01643f |
This journal is © The Royal Society of Chemistry 2015 |