Patterning, integration and characterisation of polymer optical oxygen sensors for microfluidic devices†
Abstract
This paper describes a process for the layer-by-layer fabrication and integration of luminescent
* Corresponding authors
a
MacDiarmid Institute for Advanced Materials and Nanotechnology, Department of Electrical and Computer Engineering, University of Canterbury, Private Bag 4800, Christchurch, New Zealand
E-mail:
volker.nock@elec.canterbury.ac.nz
Fax: +64 3 364 2761
Tel: +64 3 364 2987 ext. 7123
b Centre for Bioengineering, Department of Mechanical Engineering, University of Canterbury, Christchurch, New Zealand
This paper describes a process for the layer-by-layer fabrication and integration of luminescent
V. Nock, R. J. Blaikie and T. David, Lab Chip, 2008, 8, 1300 DOI: 10.1039/B801879K
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content