Synthetic reference sampling target for the estimation of measurement uncertainty

Abstract

The concept of constructing a synthetic reference sampling target (RST), for the purpose of estimating bias and uncertainty caused by the process of sampling, has been shown to be feasible. An example of an RST has been prepared for measuring the concentration of contaminants, and delineating their spatial extent in ‘hot spots’, in contaminated land investigations. A circular hot spot was prepared by spiking a defined volume of top soil with barium sulfate in a previously ‘clean’ site in Ascot, UK. The assigned values for the concentration and spatial distribution of the contamination were based largely on the mass and position of the spike added to the site. These values were corroborated and refined by thorough sampling of the whole RST and of the hot spot in detail. The temporal stability and heterogeneity of the RST were tested and found to be acceptable for the intended use of the RST. The use of the site for inter-organisational sampling trials to estimate measurement uncertainty will be reported in subsequent papers.

References

1. M. Thompson, Analyst, 1995, 120, 117N.
2. ISO, Guide to the expression of uncertainty in measurement, International Organisation for Standardisation, Geneva, 1993.
3. Eurochem 1995, Quantifying uncertainty in analytical measurement. Eurochem secretariat, BAM, D-12200, Berlin, Germany, p. 87.
4. M. H. Ramsey and A. Argyraki, Sci. Total Environ., 1997, 198, 243.
5. M. Thompson and M. H. Ramsay, Analyst, 1995, 120, 261.
6. ISO 3534-1: Statistics, Vocabulary and Symbols, Part 1, Probability and General Statistical Terms, ISO, 1993, p. 34.
7. P. M. Gy, Sampling of Heterogeneous and Dynamic Materials, Elsevier, Amsterdam, 1992, p. 26.
8. M. H. Ramsey, A. Argyraki and M. Thompson, Analyst, 1995, 120, 1353.
9. A. Argyraki, M. H. Ramsey and M. Thompson, Analyst, 1995, 120, 2799.
10. M. H. Ramsay, Sampling of Environmental Materials for Trace Analysis, ed. B. Markert, VCH, Weinheim, 1994, pp. 106.
11. L. Bretherick, Hazards in the Chemical Laboratory, The Royal Society of Chemistry, London, 4th edn., 1986, p. 185.
12. Ministry of Housing Spatial Planning and Environment, Intervention values and target values—soil quality standards, Department of Soil Protection, The Hague, Netherlands 1994, p. 3.
13. D. L. Rowell, Soil Science: Methods and Applications, Longman Scientific and Technical, Essex, 1994, p. 8.
14. A. Choudry, Institute of Arable Crop Research, Rothampstead Experimental Station, personal communication, 1996.
15. ISO, International Vocabulary of Basic and General Terms in Metrology, International Organisation for Standardisation, Geneva, 1993.
16. Nederlands Normalisatie—Institut, Soil: Investigation Strategy for Exploratory Survey, NVN 5740, Delft, NNI 1991.
17. W. G. Cochran, Sampling Techniques, John Wiley and Sons, London, 2nd edn., 1963, pp. 114–152.
18. C. C. Ferguson, in Contaminated Soil '93, ed. F. Arendt, G. J. Annokkée and R. Van den Bosman, Kluwer Academic Publishers, The Netherlands, 1993, pp. 599–608.
19. R. Smith and G. V. James, The Sampling of Bulk Materials, The Royal Society of Chemistry, London, 1981, pp. 91–105.
20. M. Thompson and J. N. Walsh, Handbook of Inductively Coupled Plasma Spectrometry, Blackie, London, 2nd edn., 1989, p. 160.
21. M. H. Ramsey, M. Thompson and M. Hale, J. Geochem. Explor., 1992, 44, 23.