Use of boric acid to improve the microwave-assisted dissolution process to determine fluoride forming elements in steels by flow injection inductively coupled plasma mass spectrometry

Abstract

The applicability of FI-ICP-MS combined with microwave sample digestion for the simultaneous determination of trace amounts of La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu in iron and steel samples was investigated. The use of hydrofluoric acid in the sample dissolution process produced nearly invisible insoluble particles with the REEs, leading to erroneous quantification of these elements. The addition of boric acid, complexing HF, solved this problem. By monitoring the transient signals produced by the FI microsampling system, it was possible to evaluate the effectiveness of the sample dissolution procedure. Severe depressive matrix effects caused by the sample matrix were encountered when the signals were compared with those from HNO₃ solutions; in contrast, no effects were observed with the addition of boric acid. A highly alloyed steel, stainless steel certified reference material JK 37 (Sandvik Steel), was used to evaluate the effectiveness of the dissolution procedure and to develop the method. The limits of quantification (LOQ) calculated on the basis of 10√^s ranged between 0.008 µg g^–1 for Lu and 0.040 µg g^–1 for Nd. The relative standard deviation for all the analytes was better than 3% (ⁿ=4) for concentrations above 10 times the LOQ.

References

1. F. Rapatz, Die Edelstähle, Springer, Berlin, 5th edn., 1962, p. 311.
2. The Making, Shaping and Treating of Steels, USS, ed. W. T. Lankford, Jr., N. L. Samways and R. F. Craven, 10th edn., Herbick and Held, Pittsburgh, PA, pp. 341 and 317, 1995.
3. A. Hirose, K. Kobori and D. Ishii, Anal. Chim. Acta, 1978, 97, 303.
4. A. Michard and F. Albarede, Chem. Geol., 1986, 55, 51.
5. M. B. Shabani, T. Akagi, H. Shimizu and A. Masuda, Anal. Chem., 1991, 63, 2099.
6. P. Möller, P. Dulski and J. Luck, Spectrochim. Acta, Part B, 1992, 47, 1379.
7. V. W. Warandasher, A. N. Turanov, H. M. Kuss, L. V. Zadneprink and V. E. Bautin, in Modern Aspects of Analytical Chemistry, ed. H. M. Kuss and U. Telghder, Verlag Mainz, Aachen, 1997, p. 151.
8. K. E. Jarvis, A. L. Gray and R. S. Houk, Handbook of Inductively Coupled Plasma Mass Spectrometry, Chapman and Hall, New York, 1992.
9. H. M. Kingston and L. B. Jassiel, Introduction to Microwave Sample Preparation, American Chemical Society, Washington DC, 1988.
10. T. Dorado López, M. del Monte, R. Falciani and A. Tamba, Report CECA-EUR 15800it, Applicazione del forno a microonde come sistema oggetivo, sicuro e rapido per la dissoluzione e il trattamento dei campioni nell'analisi chimica suderurgica. Commission of the European Communities, CECA–CE–CEEA, Brussels, Luxembourg, 1996.
11. H. M. Kuss, D. Bossmann and M. Müller, in EUR 14113 EN, ed. R. Nauche, Rapid digestion method for the determination of boron in steels. Commission of the European Communities, Brussels, 1992, p. 302.
12. H. M. Kuss, Fresenius' J. Anal. Chem., 1992, 343, 788.
13. T. R. Dulski, A Manual for Chemical Analysis of Metals, ASTM Manual Series, NL 25, ASTM, West Consholocken, PA, USA, 1996.
14. S. Wu, Y. H. Zhao, X. Feng and A. Wittmeier, J. Anal. At. Spectrom., 1996, 11, 287.
15. H. Vanhoe, R. Dams and J. Versieck, J. Anal. At. Spectrom., 1994, 9, 23.
16. ISO/CD 12235, General guidelines for inductively coupled plasma emission spectrometry (ICP–AES). Part I, General subjects. Part II, Methods development and analysis, 1997(to be completed).