Amperometric sulfur dioxide gas sensor with dimethyl sulfoxide as solvent for internal electrolyte solution

Abstract

An amperometric sensor for atmospheric sulfur dioxide based on a classical three-electrode cell configuration equipped with a microporous Teflon membrane is presented. The measured current, directly associated with oxidation of SO₂ on a gold electrode, is related to the SO₂ level. Various electrolyte solutions, including aqueous H₂SO₄, HClO₄, HClO₄–H₂SO₄ mixtures and Li₂SO₄ and also solutions of H₂SO₄ and HClO₄ in dimethyl sulfoxide (DMSO)–water solvent mixture, were tested. The high sensitivity, up to 45 nA ppm^–1 (0.9 µA cm^–2 ppm^–1) SO₂, was achieved when the sensor was filled with 5 M H₂SO₄ in DMSO–H₂O with an H₂O:DMSO mole ratio of 2. The respective value for standard 5 M H₂SO₄ electrolyte solution was only 0.5 nA ppm^–1 SO₂. The high sensitivity and advantages resulting from the use of an organic solvent (DMSO) are discussed.

References

1. F. Oehme, in Sensors: A Comprehensive Survey, ed. Goepel, W., Hesse, J., and Zemel, J. N., VCH, Weinheim, 1991, vol. 2, pp. 287–313.
2. B. S. Hobbs, A. D. S. Tantram and R. Chan-Henry, in Techniques and Mechanisms in Gas Sensing, ed. Moseley, P. T., Norris, J. O. W., and Williams, D. E., IOP, Bristol, 1991, pp. 161-188.
3. Z. Cao, W. J. Buttner and J. Stetter, Electroanalysis, 1992, 4, 253.
4. S. C. Chang, J. R. Stetter and C. S. Cha, Talanta, 1993, 40, 461.
5. G. Mills, F. Walsh and I. White, Chem. Technol. Eur., 1995, (7/8), 20.
6. N. J. Cade, T. K. Gibbs, P. J. Iredale and D. A. Williams, Anal. Proc., 1991, 28, 379.
7. Y. Tan and T. C. Tan, Bull. Singapore Natl. Inst. Chem., 1992, 20, 101.
8. D. Kitzelmann and C. Gottschalk, Tech. Mess., 1995, 62, 152.
9. D. T. Sawyer, R. S. George and R. C. Rhodes, Anal. Chem., 1959, 31, 2.
10. H. Dehn, V. Gutmann, H. Kirsch and G. Schoeger, Monatsh. Chem., 1962, 93, 1348.
11. F. Strafelda and J. Krofta, Collect. Czech. Chem. Commun., 1971, 36, 1634.
12. G. Belanger, Anal. Chem., 1974, 46, 1576.
13. R. W. Garber and C. E. Wilson, Anal. Chem., 1972, 44, 1357.
14. A. Rios, M. D. Luque de Castro, M. Valcarcel and H. A. Mottola, Anal. Chem., 1978, 59, 666.
15. A. Biskupski, M. Tatarek and J. Zabrzeski, Ochr. Powietrza, 1990, 24, 25.
16. J. W. Rios, J. H. Risemann and J. A. Krueger, Pure Appl. Chem., 1973, 36, 473.
17. K. F. Blurton and J. R. Stetter, J. Chromatogr., 1978, 55, 35.
18. G. Schiavon, G. Zotti, R. Toniolo and G. Bontempelli, Analyst, 1991, 116, 797.
19. B. Chachulski and J. Podstawczyński, Elektronizacja, 1995, 1, 20.
20. B. Chachulski, J. Podstawczyński and J. Szczepaniak, in Proceedings of 12th International Congress of Chemical and Process Engineering, 4th European Symposium on Electrochemical Engineering, Prague, 25–30 August 1996, Czech Society of Chemical Engineering, Prague, 1996, vol. 9, p. 112.
21. F. E. Varela, M. E. Vela, J. R. Vilche and A. J. Arvia, Electrochim. Acta, 1993, 38, 1513.
22. D. Martin and H. G. Hauthal, Dimethylsulfoxid, Akademie-Verlag, Berlin, 1971.
23. BDH Hazard Data Sheets, BDH Product Code 10323-14021-14622-28216, BDH, Poole, Dorset, 1997.