Reinforcement of styrene–butadiene rubber vulcanizate byin situsilica prepared by the sol–gel reaction of tetraethoxysilane

Abstract

In situ silica reinforcement of styrene–butadiene rubber (SBR) has been achieved by a sol–gel process using tetraethoxysilane (TEOS). SBR was sulfur-cured and the sol–gel reaction of TEOS was carried out in TEOS or in a TEOS–tetrahydrofuran (THF) mixture. The in situ silica was filled homogeneously in the rubber matrix and the size of the in situ silica was influenced by the cross-linking density of the SBR vulcanizate. n-Butylamine was effective for the method using TEOS only, whereas both hydrochloric acid and n-butylamine worked as catalysts under the experimental conditions using THF for the in situ polymerization of TEOS in the SBR vulcanizate. From the viewpoint of the reinforcement of in situ silica and the size stability of the SBR vulcanizate, the method using only TEOS was found to be better than the mixture system. This conclusion was based on the results of tensile tests, dynamic mechanical measurements, optical and transmission electron microscopies.

References

1. G. Kraus, Reinforcement of Elastomers, Interscience, New York, 1965.
2. Science and Technology of Rubber, ed. F. R. Eirich, Academic Press, Orlando, 1978.
3. R. K. Iler, The Chemistry of Silica, John Wiley & Sons, New York, 1979.
4. M. P. Wagner, in Rubber Technology, ed. M. Morton, Van Nostrand Reinhold, New York, 1987, p. 86.
5. S. Sakka, The Science of the Sol–Gel Process, Agune-Shofusha, Tokyo, 1988(in Japanese).
6. C. J. Brinker and G. W. Scherer, Sol–Gel Science, Academic Press, New York, 1982.
7. Y. Ikeda, A. S. Hashim and S. Kohjiya, Bull. Inst. Chem. Res., Kyoto Univ., 1995, 72(5–6), 406.
8. J. Wen and G. L. Wilkes, Chem. Mater., 1996, 8, 1667.
9. S. Kohjiya, K. Ochiai and S. Yamashita, J. Non-Cryst. Solids, 1990, 119, 132.
10. S. Kohjiya, K. Ochiai and S. Yamashita, in Polymer Gels, ed. D. DeRossi, K. Kajiwara, Y. Osada and Yamauchi, Plenum Press, New York and London, 1991, p. 77.
11. S. Kohjiya and Y. Ikeda, in New Functionality Materials, ed. T. Tsuruta, M. Doyama and M. Seno, Elsevier, Amsterdam, 1993, vol. C, p. 443.
12. I. Krakovsky, H. Urakawa, Y. Ikeda, S. Kohjiya and K. Kajiwara, Bull. Inst. Chem. Res., Kyoto Univ., 1994, 72(2), 231.
13. S. Kohjiya and S. Yamashita, J. Appl. Polym. Sci.: Appl. Polym. Symp., 1992, 50, 213.
14. J. E. Mark and S.-J. Pan, Makromol. Chem., Rapid Commun., 1982, 3, 681.
15. J. E. Mark, in Science of Ceramic Chemical Processing, ed. L. L. Hench and R. D. Ulrich, John Wiley & Sons, New York, 1985.
16. J. E. Mark, Chemtech, 1989, 19, 230.
17. C.-C. Sun and J. E. Mark, J. Polym. Sci., Part B: Polym. Phys., 1987, 25, 1561.
18. C. J. T. Landry, B. K. Coltrain, J. A. Wesson, N. Zumbulyadis and J. L. Lippert, Polymer, 1992, 33, 1496.
19. K. F. Silverira, I. V. P. Yoshida and S. P. Nunes, Polymer, 1995, 36, 1425.
20. J. J. Fitzgerald, C. J. T. Landry and J. M. Pochan, Macromolecules, 1992, 25, 3715.
21. A. Morikawa, Y. Iyoku, M. Kakimoto and Y. Imai, Polym. J., 1992, 24, 107.
22. A. Morikawa, Y. Iyoku, M. Kakimoto and M. Imai, Polym. J., 1992, 24, 689.
23. T. Saegusa and Y. Chujo, Makromol. Chem., Macromol. Symp., 1992, 64, 1.
24. A. S. Hashim, Y. Ikeda and S. Kohjiya, Polym. Int., 1995, 38, 111.
25. A. S. Hashim and S. Kohjiya, J. Sol–Gel Sci. Technol., 1995, 5, 211.
26. S. Kohjiya, A. Yajima, Y. J. R. Yoon and Y. Ikeda, Nippon Gomu Kyokaishi (J. Soc. Rubber Ind., Jpn), 1994, 67, 859.
27. Y. Ikeda, A. Tanaka and S. Kohjiya, J. Mater. Chem., 1997, 7, 455.
28. M. Mooney, J. Appl. Phys., 1940, 11, 582.
29. R. S. Rivlin, Rheology, Academic Press, New York, 1956, vol. I.
30. Y. Ikeda and S. Kohjiya, Polymer, in press.