Microwave-induced Plasma Boosted Microsecond-pulse Glow Discharge Optical Emission Spectrometry

(Note: The full text of this document is currently only available in the PDF Version )

YONGXUAN SU, PENGYUAN YANG, DENGYUN CHEN, ZHIGANG ZHANG, ZHEN ZHOU, XIAORU WANG and BENLI HUANG


Abstract

A microsecond-pulse (µs-pulse) glow discharge (GD) source boosted by a microwave-induced plasma (MIP) has been developed and studied for optical emission spectrometry (OES). The excitation processes of the tandem GD source were investigated. The analytical characteristics of the GD-OES source in the presence and absence of the MIP were compared, including the operating parameters, signal-to-background ratios (S/B) and relative standard deviation (RSD). The results show that under a relatively low discharge pressure (<180 Pa), the µs-pulse GD can couple fairly well with the MIP and emit intense analytical lines. When the GD source is operated under a pressure higher than 200 Pa, two emission peaks appear, independent in time, for a given resonance atomic line, because sample atoms are independently structurally excited, first by the µs-pulse GD and then by the MIP. The time interval between the two peaks for Zn I 213.8 nm is longer than that for Cu I 324.7 nm, which is believed to be due to the faster diffusing velocity of copper atoms. When the µs-pulse GD lamp is operated under a gas pressure higher than 220 Pa, the ion population is so high that Cu II ionic line at 224.7 nm ‘becomes’ two peaks because of a possible self-absorption. The results show that the supplementary use of an MIP can eliminate the self-absorption of ionic and atomic lines. When the µs-pulse GD source is coupled with the MIP, S/Bs are improved by a factor of more than one order of magnitude for several analytical lines. A short-term RSD of 0.2% is achieved for the ‘µs-pulse GD+MIP’ configuration compared with that of 1.0% for ‘µs-pulse GD only’ mode. The experimental results show that the MIP boosted µs-pulse GD is a promising technique for solid sample and surface analysis.


References

  1. J. A. C. Broekaert, Appl. Spectrosc., 1995, 49, 12A CAS.
  2. F. Leis and E. B. M. Steers, Spectrochim. Acta, Part B, 1994, 49, 289 CrossRef.
  3. F. Leis, J. A. C. Broekaert and K. Laqua, Spectrochim. Acta, Part B, 1987, 42, 1169 CrossRef.
  4. M. Outred, M. H. Rümmeli and E. B. M. Steers, J. Anal. At. Spectrom., 1994, 9, 381 RSC.
  5. Y. M. Li, Z. H. Du, Y. X. Duan, H. Q. Zhang, Q. H. Jin and R. S. Liu, Chem. J. Chin. Univ., 1996, 17, 215 Search PubMed.
  6. W. Hang, W. O. Walden and W. W. Harrison, Anal. Chem., 1996, 68, 1148 CrossRef CAS.
  7. W. O. Walden, W. Hang, B. W. Smith, J. D. Winefordner and W. W. Harrison, Fresenius' J. Anal. Chem., 1996, 354, 442 CAS.
  8. W. Hang, P. Y. Yang, X. R. Wang, C. L. Yang, Y. X. Su and B. L. Huang, Rapid Commun. Mass Spectrom., 1994, 8, 590 CAS.
  9. Y. X. Su, Z. Zhou, P. Y. Yang, X. R. Wang and B. L. Huang, Spectrochim. Acta, Part B, 1997, 52, 633 CrossRef.
  10. J. A. Klingler, P. J. Savickas and W. W. Harrision, J. Am. Soc. Mass Spectrom., 1990, 1, 138 CrossRef CAS.
  11. J. A. Klingler, C. M. Barshick and W. W. Harrision, Anal. Chem., 1991, 63, 2571 CrossRef.
  12. C. Pan and F. L. King, Anal. Chem., 1993, 65, 3187 CrossRef CAS.
  13. E. B. M. Steers and F. Leis, Spectrochim. Acta, Part B, 1991, 46, 527 CrossRef.
  14. F. Leis and J. A. C. Broekaert, Spectrochim. Acta, Part B, 1991, 46, 243 CrossRef.
Click here to see how this site uses Cookies. View our privacy policy here.