Establishing an SI-traceable Copper Concentration in the Candidate Reference Material MURST ISS A1 Antarctic Sediment Using Isotope Dilution Applied as a Primary Method of Measurement

Abstract

Traceability is a term that is heavily debated world-wide in the analytical chemistry community. This paper describes an attempt to obtain an SI-traceable value for the Cu concentration in the Candidate Reference Material MURST-ISS A1 Antarctic Sediment. This material was collected by the Instituto Superiore di Sanita (ISS, Rome, Italy) and was processed at the Institute for Reference Materials and Measurements (IRMM, Geel, Belgium) into a homogeneous and dried powder. The analytical method used was isotope dilution (ID) combined with inductively coupled plasma mass spectrometry (ICP-MS). Microwave pressurised digestion and separation of Cu by ion-exchange chromatography were used. The International Vocabulary of Basic and General Terms in Metrology (VIM) definition of traceability requires ‘stated uncertainties’. Because a primary method of measurement (ID) is used, an attempt was made to make these ‘stated uncertainties’ as detailed as possible, thereby using the International Organisation for Standardization (ISO)/Bureau International des Poids et Measures (BIPM) guide and taking into account all possible sources of uncertainty (Type A and Type B). The established value for the Cu concentration is 86.7 nmol g^-1 with an expanded uncertainty of 4.9 nmol g^-1 (coverage factor k=2).

References

1. P. De Bièvre, R. Kaarls, H. S. Peiser, S. D. Rasberry and W. P. Reed, Accred. Qual. Assur., 1996, 1, 3.
2. International Vocabulary of Basic and General Terms in Metrology, International Organisation for Standardisation, Genève, 1993.
3. Comité Consultatif pour la Quantite de Matière, Rapport de la 1^re session, 1995, Édité par le BIPM, Pavillon de Breteuil, F-92312 Sèvres Cedex, France.
4. J. D. Fassett and P. J. Paulsen, Anal. Chem., 1989, 61, 643A.
5. J. R. Moody and M. S. Epstein, Spectrochim. Acta, Part B, 1991, 46, 1571.
6. T. D. B. Lyon and G. S. Fell, J. Anal. At. Spectrom., 1990, 5, 135.
7. G. Kramer, personal communication.
8. K. H. Grobecker, personal communication.
9. U. Kurfürst, K. H. Grobecker and M. Stoeppler, In: Trace Elements—Analytical Chemistry in Medicine and Biology, ed. Bräter, P., and Schramel, P., Walter de Gruyter, Berlin, 1984, Vol. 3, pp. 591–601.
10. P. De Bièvre, Fresenius' J. Anal. Chem., 1990, 337, 766.
11. P. De Bièvre, Fresenius' J. Anal. Chem., 1994, 350, 277.
12. Certificate for IRMM-632 spike isotopic reference material, in preparation.
13. F. Vanhaecke, H. Vanhoe, L. Moens and R. Dams, Bull. Soc. Chim. Belg., 1995, 104, 653.
14. International Union of Pure and Applied Chemistry, Commission on Atomic Weights and Isotope Abundances, Isotopic Composition of Elements, Pure Appl. Chem., 1991, 63, 991.
15. F. Vanhaecke, L. Moens, R. Dams, I. Papadakis and P. Taylor, Anal. Chem., 1997, 69, 268.
16. Guide to the Expression of Uncertainty in Measurement, International Organisation for Standardisation, Genève, 1993.
17. Quantifying Uncertainty in Analytical Measurement, EURACHEM, London, 1995.