Issue 27, 2013

Solution-deposited Zr-doped AlOx gate dielectrics enabling high-performance flexible transparent thin film transistors

Abstract

Although high dielectric constant (k) oxide thin film has been considered as a key element for high performance and low-voltage driven thin-film transistors (TFTs), there are no solution processable high-k oxide dielectrics that satisfy the stringent requirements of low-temperature processability, mechanical flexibility, and good TFT performance. Here, we demonstrate that the incorporation of a zirconium component that has strong bonding to oxygen enables a significant reduction in the processing temperature for soluble alumina dielectrics to as low as 250 °C. Based on these Zr-AlOx films, high performance, low operational voltage, flexible TFTs are achieved. Flexible TFTs operate well under a gate bias of 5 V, exhibiting a high saturation mobility of 51 cm2 V−1 s−1, an on/off current ratio of 104, and a low threshold voltage of 1.2 V with good mechanical flexibility. This is the first study demonstrating the mechanical flexibility of all-oxide soluble high-k dielectric–semiconductor-based TFTs with an emphasis on the influence of annealing temperature on the solution-deposited high-k oxide dielectric characteristics.

Graphical abstract: Solution-deposited Zr-doped AlOx gate dielectrics enabling high-performance flexible transparent thin film transistors

Supplementary files

Article information

Article type
Paper
Submitted
25 Mar 2013
Accepted
10 May 2013
First published
10 May 2013

J. Mater. Chem. C, 2013,1, 4275-4282

Solution-deposited Zr-doped AlOx gate dielectrics enabling high-performance flexible transparent thin film transistors

W. Yang, K. Song, Y. Jung, S. Jeong and J. Moon, J. Mater. Chem. C, 2013, 1, 4275 DOI: 10.1039/C3TC30550C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements