Issue 6, 2020

Reducing trap density and carrier concentration by a Ge additive for an efficient quasi 2D/3D perovskite solar cell

Abstract

We report that doping with hydrophobic bulky 2D phenylethylammonium (PEA+) is desirable to stabilize the perovskite matrix and enhance its stability. The addition of PEA+ alters the crystal growth orientation and improves the connectivity of the crystal grains. However, solely adding the PEA+ material cannot fully passivate the severe bulk recombination sites/interior defects due to Sn vacancies, leading to an efficiency of 3.96% (Voc of 0.36 V) for a Ge-free device. In contrast, we find that the addition of smaller-sized Ge ions with an optimum doping concentration effectively reduces the leakage current and suppresses the carrier density of the perovskite material. From the perspective of traps, the addition of Ge reduces the traps, typically deep traps, and its effectiveness (Ge) in trap passivation is further deduced from the thermally stimulated current (TSC) profile. The total trap density was doubly reduced to 4.14 × 1020 cm−3 when 7.5 mol% Ge was added, which led to a photo-conversion efficiency of 7.45% with a high Voc of 0.46 V. In addition, defect healing by the Ge additive significantly enhanced the stability of the unencapsulated device for 192 h. This work shows that Ge is an effective additive to suppress the recombination sites (trap state passivation), leading to the establishment of an efficient tin-based perovskite solar cell.

Graphical abstract: Reducing trap density and carrier concentration by a Ge additive for an efficient quasi 2D/3D perovskite solar cell

Supplementary files

Article information

Article type
Communication
Submitted
31 Oct 2019
Accepted
13 Jan 2020
First published
14 Jan 2020

J. Mater. Chem. A, 2020,8, 2962-2968

Author version available

Reducing trap density and carrier concentration by a Ge additive for an efficient quasi 2D/3D perovskite solar cell

C. H. Ng, K. Hamada, G. Kapil, M. A. Kamarudin, Z. Wang, S. likubo, Q. Shen, K. Yoshino, T. Minemoto and S. Hayase, J. Mater. Chem. A, 2020, 8, 2962 DOI: 10.1039/C9TA11989B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements