Issue 45, 2018

Tunable fabrication of core–shell Ni–MnO2 hybrid foams through structure-guided combustion waves for binder-free high-performance supercapacitor electrodes

Abstract

Hybrid foam structures of metal and carbon are extensively used for electrochemical applications. However, their fabrication involves solution- or vacuum-processing, which damages the metal backbones or increases the fabrication time and cost. Herein, we report a tunable method for the scalable fabrication of core–shell metal–carbon hybrid foams using structure-guided combustion waves (SGCWs) and their application for the synthesis of core–shell Ni–MnO2 hybrid foams as binder-free supercapacitor electrodes. SGCWs passing through the hybrids of nickel foams and chemical fuels, prepared by a wet impregnation method, enabled the direct fabrication of carbon coatings on the surfaces of the inner nickel backbones and yielded core–shell Ni@C. The incompletely combusted carbonaceous fuels in a few seconds, which were formed in the narrowly confined foam structures reaching 430 °C, acted as amorphous carbon coatings, while the total amount and uniformity of the carbon content could be controlled by the number of times SGCWs were applied. The developed carbon coatings were used as templates for MnO2 shells to synthesize core–shell Ni@MnO2 hybrid foams as binder-free supercapacitor electrodes. The core–shell Ni@MnO2 foams fabricated by applying SGCWs three times exhibited a high specific capacitance of up to 660 F g−1 and stable capacitance retention (∼95.4% over more than 10 000 cycles) because of their lower serial resistance and optimal diffusion during the redox reaction. This tunable fabrication method using SGCWs in a vacuum-free, open-air environment enables the synthesis of scalable carbon coatings on metal- or ceramic-based foams for electrochemical applications.

Graphical abstract: Tunable fabrication of core–shell Ni–MnO2 hybrid foams through structure-guided combustion waves for binder-free high-performance supercapacitor electrodes

Supplementary files

Article information

Article type
Paper
Submitted
20 Aug 2018
Accepted
17 Oct 2018
First published
18 Oct 2018

J. Mater. Chem. A, 2018,6, 22998-23009

Tunable fabrication of core–shell Ni–MnO2 hybrid foams through structure-guided combustion waves for binder-free high-performance supercapacitor electrodes

H. Hwang, D. Shin, T. Kim, S. Park, T. Yeo and W. Choi, J. Mater. Chem. A, 2018, 6, 22998 DOI: 10.1039/C8TA08110G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements