Issue 9, 2018

High performance, environmentally benign and integratable Zn//MnO2 microbatteries

Abstract

With the explosive development of wearable electronics and the Internet of Things (IoT), it is highly desirable to develop miniaturized power sources with high performance, low-cost, environmental friendliness and integratable characteristics. Rechargeable microbatteries (MBs) can be used as the main power sources of future miniaturized wearable electronics, which have drawn broad attention recently. However, ever-reported MBs, such as micro-lithium batteries, have intrinsic safety hazards and environmental threats, and are not fully compatible with the green initiative of the IoT. Here, we report aqueous Zn//MnO2 MBs, with the merits of green, low cost and sustainability. By using a simple and scalable fabrication strategy, Zn//MnO2 MBs constructed with a three-dimensional (3D) MnO2@nickel nanocone array (NCA) cathode, a Zn@NCA anode, and a mild aqueous electrolyte containing ZnSO4 and MnSO4 can be prepared on a large scale. The as-prepared Zn//MnO2 MB reveals a superior capacity of 53.5 μA h cm−2 μm−1 at 1 C rate and a working voltage of 1.4 V. Moreover, it achieves a superior volumetric energy density of 71.3 μW h cm−2 μm−1, together with a peak power density of 1621.4 μW cm−2 μm−1, substantially higher than those of the reported lithium-ion MBs. Such an ultrathin (74 μm in thickness), lightweight (30 mg per unit) and flexible Zn//MnO2 MB component can power three pieces of LEDs. Last but not least, the fabrication strategy of our Zn//MnO2 MBs is fully compatible with flexible electronic fabrication processes. For instance, we have demonstrated that these Zn//MnO2 MBs could share the same fabrication process platform with radio frequency identification (RFID) tags. We envisage that our current technology would accelerate the use of miniaturized power sources for IoT applications, and inspire the development of intelligent manufacturing technology.

Graphical abstract: High performance, environmentally benign and integratable Zn//MnO2 microbatteries

Supplementary files

Article information

Article type
Paper
Submitted
14 Dec 2017
Accepted
24 Jan 2018
First published
24 Jan 2018

J. Mater. Chem. A, 2018,6, 3933-3940

High performance, environmentally benign and integratable Zn//MnO2 microbatteries

W. Lai, Y. Wang, Z. Lei, R. Wang, Z. Lin, C. Wong, F. Kang and C. Yang, J. Mater. Chem. A, 2018, 6, 3933 DOI: 10.1039/C7TA10936A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements