Issue 44, 2016

Self-healing polymers and composites for extreme environments

Abstract

Self-healing polymers and composites utilizing the Diels–Alder reaction have received considerable attention due to the intrinsic healing capability of this crosslink. However past research focused on chemistries that cleave at low temperatures, which places limitations on the polymer's use temperature. Here, it is demonstrated that the crosslinking Diels–Alder (DA) reaction between anthracene and maleimide moieties can be used to achieve healing efficiencies greater than 94% for polymers and 69% for carbon fiber reinforced polymer composites while remaining stable beyond 240 °C. It is shown that the self-healing behavior can be obtained purely through the reformation of mechanically cleaved DA adducts since the cleaving temperature is beyond the decomposition temperature. The self-healing polymer reported here is obtained from liquid monomers allowing the polymerization of bulk polymer samples and its infusion into continuous fiber reinforced composites. It is shown that the polymer can yield thermally stable composites with mechanical properties comparable to those of other engineering polymers and structural composites.

Graphical abstract: Self-healing polymers and composites for extreme environments

Supplementary files

Article information

Article type
Paper
Submitted
22 Jul 2016
Accepted
11 Oct 2016
First published
11 Oct 2016

J. Mater. Chem. A, 2016,4, 17403-17411

Self-healing polymers and composites for extreme environments

Y. Heo, M. H. Malakooti and H. A. Sodano, J. Mater. Chem. A, 2016, 4, 17403 DOI: 10.1039/C6TA06213J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements