Jump to main content
Jump to site search

Issue 7, 2015
Previous Article Next Article

Electrospinning of crystalline MoO3@C nanofibers for high-rate lithium storage

Author affiliations

Abstract

MoO3@C nanofibers have been successfully synthesized by electrospinning the Mo precursor with polyvinyl pyrrolidone (PVP), followed by annealing. When tested as an anode material, the as-synthesized MoO3@C nanofibers could deliver a high discharge capacity of 623 mA h g−1 after 100 cycles at 500 mA g−1, and 502 mA h g−1 even at 1000 mA g−1.

Graphical abstract: Electrospinning of crystalline MoO3@C nanofibers for high-rate lithium storage

Back to tab navigation

Supplementary files

Article information


Submitted
12 Nov 2014
Accepted
21 Dec 2014
First published
24 Dec 2014

J. Mater. Chem. A, 2015,3, 3257-3260
Article type
Communication

Electrospinning of crystalline MoO3@C nanofibers for high-rate lithium storage

X. Li, J. Xu, L. Mei, Z. Zhang, C. Cui, H. Liu, J. Ma and S. Dou, J. Mater. Chem. A, 2015, 3, 3257 DOI: 10.1039/C4TA06121G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.


Social activity

Search articles by author

Spotlight

Advertisements